Reliant EMC

Accessories

Accessories
In this category you will find the accessories of all our manufactured equipment.
BCK 400 F BURST CALIBRATION KIT
CAR Calibration Kit
CAR ICC Bulk Current Injection Probe
CCK - Capacitor Calibration Kit
CCK20 Capacitor Calibration Kit
EFTC-CK - Calibration kit for burst Coupling Clamps
Emergency Stop Switch
Foot Switch
HI 100 Helmholtz Coil
HI 200 Helmholtz Coil
IMP8 Impedance matching network for Surge generators
PA 503 Safety test cabinet
PA 504 Safety Test Cabinet
PA 505 Safety Test Cabinet
PA 525 Safety Test Cabinet
PU 12 A-B DUT Switchover
SCK 105 - Surge Calibration Kit
SCK 105 inBox- Surge Calibration Kit
VPS 250-16 - Variable Power Source
Warning lights
 
 
BCK 400 F BURST CALIBRATION KIT (Part Number 5302006)
Hilo-Test BCK 400 F BURST CALIBRATION KIT

 

Summary:
• Burst Calibration Kit
• Input voltage: 5 kV
• Ratio, 200/400:1
• Bandwidth: 400 MHz

 

The Burst Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of burst generators, e.g. the EFTG 4510 or the burst generator sub-unit of the CE-TESTER. It essentially consists of a load resistor, a pulse voltage divider and a double shielded coaxial cable.

 

Related Standards:
IEC: IEC 61000-4-04

 

 
 
CAR Calibration Kit (Part Number 5207078)
CAR Calibration Kit
 
Summary:
• Standard loads
• According ISO
 
In accordance with the pulse verification requirements given in Annex C of ISO 7637-2:2011 and Annex A of ISO 16750-2:2012, test pulses generated by automotive transient generators need to be verified both under no-load (open circuit verification) and loaded conditions with specified loads.
 
Related Standards: ISO: ISO 7637-2, ISO 16750-2
 

 

 
CAR ICC Bulk Current Injection Probe
CAR ICC Bulk Current Injection Probe
 
Summary:
• Bulk Current Injection Probe
• Bandwidth: 0,1 - 1000 MHz
 
The CAR-ICC Bulk Current Injection Probe is used for BCI testing in accordance with automotive specifications as well as diagnostic bulk current testing up to 1 GHz.

 

CCK - Capacitor Calibration Kit (Part Number 5300088)
Capacitor Calibration Kit (CCK)

 

Summary:
• Capacitor Calibration Kit
• Input voltage: 12kV
• 27nF, 45nF, 68nF, 113nF P
 
The Capacitor Calibration Kit (CCK) has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100.

 

 

 
CCK20 Capacitor Calibration Kit (Part Number 5300088)
CCK20 Capacitor Calibration Kit
 
Summary:
• Capacitor Calibration Kit
• Input voltage: 20kV
• 50nF, 50nF, 33nF, 23nF
 
The Capacitor Calibration Kit 20 (CCK20) has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100.

 

EFTC-CK Calibration kit for Burst Coupling Clamps (Part Number 5201026)
HILO-TEST Emergency stop Switch
Summary:
• Calibration kit for burst coupling clamps
• According ISO
 
The EFTC-CK is a calibration kit for burst/EFT coupling clamps as specified in IEC 6100-4-4:2012. It has been designed for calibration of coupling clamps like EFTC2012. The set consists of a transducer plate and a termination bracket (connecting adapter).

 

Related Standards:
IEC 61000-4-04

 

 

 
Emergency Stop Switch / IPG PG NA (Part Number 5204082)
HILO-TEST Emergency stop Switch

 

Summary:
• Emergency stop switch
• for safety circuit
• latching
• with rotary release
 
Emergency stop switch for interrupting / close the internal safety circuits.

 

Foot Switch
 
Summary:
• Foot switch
• ergonomic
• robust
• Big button Foot switch to trigger certain generator functions.
 

 

HI 100 Helmholtz Coil
HI 100 Helmoltz Coil
 
Summary:
• Helmholtz Coil
• Power frequency- and pulsed magnetic fields
 
Air coil designed for Generation of: Power frequency magnetic fields according to IEC 61000-4-8 Test levels 3 / 10 / 30 A/m (up to 150 A/m with type HI 102) Pulsed magnetic fields according to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m (up to 2200 A/m with type HI 102) Wave shape 8/20μs
 
Related Standards:
IEC: IEC 61000-4-08, IEC 61000-4-09
 
 
 
HI 200 Helmholtz Coil (Part Number 5201006)
HI 100 Helmoltz Coil
Helmholtz Coil According to IEC 61000-4-8 and IEC 61000-4-9
 
You can position the Hi 200 coil in vertical (picture) or in horizontal position to your test object and fix it with lamps or brace supports.
 
Air coil designed for Generation of:
• Power frequency magnetic fields acc. to IEC 61000-4-8 Test levels continuous 3 / 10 / 30 / 100 / 300 A/m Test level 1000 A/m short, with special transformer
• Pulsed magnetic fields acc. to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m Wave shape 8/20μs
 
 
Related Standards:
IEC: IEC 61000-4-8 and IEC 61000-4-9
 

 

 
IMP8 Impedance matching network for Surge Generators (Part Number 5201028)
HILO-TEST-IMP8-Impedance-matching-network-for-Surge-Generators
The external impedance IMP8 is the impedance, required for the pulse specifications according to standard IEC 61000-4-5 Ed.3, for measuring the pulse output voltage of surge generators. Additional
 
Related Standards:
IEC:IEC 61000-4-05

 

 

PA 503 Safety test cabinet
PA 503 Safety test cabinet
 
Summary:
• Safety test cabinet
• Test voltage: 6 kV / 12 kV
• Dimensions W*H*D: 470 * 280 * 490 mm³
 
The safety test cabinet PA 503 is designed for high-voltage testing of components and PCB's etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.
 

 

PA 504 Safety test cabinet (Part Number 5300038)
HILO TEST PA 504 Safety test cabinet
 
Summary:
• Safety test cabinet
• Test voltage: 6 kV / 12 kV
• Dimensions W*H*D: 555 * 480 * 600 mm³
 
The safety test cabinets PA 50* are designed for high-voltage testing of components and PCB's etc. The transparent cabinets prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.
 

 

 
PA 505 Safety Test Cabinet
PA 505 Safety test cabinet
 
Summary:
• Safety test cabinet
• Test voltage: 10 kV
• Dimensions W*H*D: 440*250*500 mm³
 
The safety test cabinet PA 505/ PA 525 is designed for high-voltage testing of components and PCB's etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.
 
 

 

PA 525 Safety Test Cabinet

PA 525 Safety test cabinet

Summary:
• Safety test cabinet
• Test voltage: 12 kV
• Dimensions W*H*D: 440*250*500 mm³
 
The safety test cabinet PA 505/ PA 525 is designed for high-voltage testing of components and PCB's etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.
 

 

 
PU 12 A-B DUT Switch Over
HILO-TEST PU 12 A-B DUT Switchover
 
Summary:
• DUT switchover
• High voltage test of devices
 
For high-voltage testing of components, a DUT switchover is available for different pulse generators.
 
By using the PU 12 A-B DUT Switchover the testing time be significantly reduced and increased the throughput significantly. The specimens are contacted via test adapter that new line during the test can be fitted and replaced quickly. Direct testing of 8/10/12 or 15 individual specimens or the "Differential / common mode" testing the a / b wires of IT equipment can be realized will. The control of the PU 12 A-B DUT Switchover done from the test generator.
The specimens are covered during the test by a safety test.
Of the Following the test generator is carried coaxially on the back of the units. To this Thus achieved a high degree of personal safety for the operating personnel.
Block diagram, by way of example:

To monitor the test quantities can pulse voltage divider and / or Current viewing resistors are integrated into the PU 12 A-B DUT Switchover.
 
 
 
SCK 105 - Surge Calibration Kit (Part Number 5302005)
Surge Calibration Kit 105 (SCK 105)
 
Summary:
• Surge Calibration Kit
• Input voltage: 12kV
• Ratio: 1000:1
• Bandwidth: 10MHz
 
The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable

 

 

SCK 105 inBox (Surge Calibration Kit 105) (Part Number 5302005)
Surge Calibration Kit 105 (SCK 105 inBox)
 
Summary:
• Surge Calibration Kit
• Input voltage: 12kV
• Ratio: 1000:1
• Bandwidth: 10MHz
 
The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable.

 

 

 

 
VPS 250-16 (Variable Power Source 250-16) (Part Number 5201005)
Variable Power Source 250-16 (VPS 250-16)

 

Summary:
• Variable Power Source
• Voltage: 0 - 250 V
• Current: 16 A
 
Motor-driven variable transformer, controlled by CE-TESTER, used for power supply variation according to IEC 61000-4-11.
 
Related Standards: IEC: IEC 61000-4-11
 

 
Warning lights (Part Number 5300008)
HILO-TEST Warning lights
 
Summary:
Warning lamps
red/ green
universally Placeable Warning / signal lamps for visualizing the generator state. Signal red: "Warning Hazard", signal green: "all clear".
 

 

Request a Quote / Contact Us!


 

 

Hilo-Test product Line

HILO-TEST Company Information

HILO-TEST Product Categories:
• AC DC Test Equipment
Accessories
Automotive EMC Test Systems
Burst (EFTG) Simulators / Burst Calibration Kit
Coupling Network (CDN)
ESD Generators
High Voltage Dividers
Impulse Current Generators
Impulse Voltage Generators
Miscellaneous Products
Multifunction Generators
Oscillatory wave generator systems
Power Fail Generators
Ring-wave Generators
Shunts
Software
Surge (Hybrid) Generators
Telecom Generators

HILO-TEST PRODUCTS BY STANDARDS CATAGORIES
EMC Test Equipment
CCITT Test Equipment, Series K
 
Component Test Generators
  • • High Voltage Pulse Generators
    • • PG 10-200/PG 12-360 Accessories
    • High Current Pulse Generator
High Voltage Test and Measurement Equipment
  • • AC and DC
    • High Voltage Measurement Equipment
    • Calibration Equipment
Other Products

Reliant EMC Product Lines