Reliant EMC

Data Sheets and Downloads

Hilo-Test Data Sheets and Downloads

AC-Tester
AC-Tester-6.pdf
BCK-400-F-2-BURST-CALIBRATION-KIT
Car-Calibration-Kit
CAR-PG-2804-Load-Dump-Generator
Car-Test-System-14 (CAR-SYS 14)
Car-Test-System-14 Instruction Manual (CAR-SYS 14)
Car-Transient-Emission-14
CCK20-CAPACITOR-CALIBRATION-KIT-20
CCK-CAPACITOR-CALIBRATION-KIT
CDN-5-64-Coupling-Network
CDN-5-80-Coupling-Network
CDN-304-Coupling-Decoupling-Network
CDN-2012-Capacitive-Coupling-Clamp
CDN-2402-CDN-2410-Coupling-Decoupling-Network
CDN-2802-Coupling-Decoupling-Network
CDN-4416B-COUPLING-DECOUPLING-NETWORK
CDN-4416-CDN-6416-CDN-10416-Coupling-Decoupling-Network
CDN-4432-CDN-6432-CDN-10432-Coupling-Decoupling-Network
CDN-4463-6463-10463-12463-Coupling-Decoupling-Network
CDN-5404-Coupling-Decoupling-Network
CDN-10216-CDN-12216-Coupling-Decoupling-Network
CDN-xx4100-Coupling-Decoupling-Network
CDN-xx4250-Coupling-Decoupling-Network
CE-Tester
CE-Tester-1
CE-Tester-2
EFTC-2012-Capacitive-Coupling-Clamp-for-Burst-EFTG-Impulses
EFTG-4510-Electrical-Fast-Transient-Generator
EMC-2015-Impulse-Generator-System
HCC Capacitor charger
HCS 3-30 -CAPACITOR-DISCHARGE-TEST-SETUP
HI-100-Helmholtz-Coil
HI-200-Helmholtz-Coil
High-Voltage-Pulse-Generator-PG-5-200-1
High-Voltage-Pulse-Generator-PG-5-200-2
HS-10-HS-5-High-Voltage-Switches
HSN-HCN-High-Voltage-Power-Supply-Capacitor-Charging-Unit
HTS-20-5-HTS-20-10-High-Voltage-DC-Test-Set
HVM-2015-High-Voltage-Measurement-Equipment
HVT-10--20-40-80-120-160-RCR-Broadband-High-Voltage-Dividers
HVTS-30-20-HVTS-30-40-High-Voltage-AC-Test-Set
HVTS-50-10-High-Voltage-AC-Test-Set
IPG-105-Combination-Wave-Generator
IPG-250-Pulse-Generator
IPG-255-HV-Impulse-Generator
IPG-506-Front-Chopped-Wave-Generator
IPG-605-1012-1218-HV-Impulse-Generator
IPG-612-Ring-Wave-Generator
IPG-612T-Ring-Wave-Generator
IPG-620-IPG-1050-HV-Impulse-Generator
IPG-809-High-Voltage-Pulse-Generator
IPG-1201-HV-Impulse-Generator
IPG-1271-HV-Impulse-Genertor
IPG-1272-HV-Impulse-Genertor
IPG-2025-IPG-2436-HV-Impluse-Generators
IPG-2553-Oscillatory-Wave-Generator
IPG-2554-Oscillatory-Wave-Generator
ISM-DIM-Diagrams
IT-5413-high-voltage-impulse-transformer
IT-5413-IT-5425-TM-410-TM-510-Impulse-Transformers
IT-5414-high-voltage-impulse-transformer
IT-5425-High-Voltage-HV-Impulse-Transformer-Data-Sheet
ITT-250-20-High-Voltage-Isolating-Transformer
HILO-TEST-MCT-5004-Multi-Channel-Trigger-Unit-Data-Sheet
PA-501-PA-502-Safety-Test-Cabinet
PA-503-Safety-Test-Cabinet
PA-505-PA-525-Safety-Test-Cabinet
PFS-2516-POWER-FAIL-SIMULATOR
PG-2.5-32-Hybridgenerator
PG-2-750-Surger-Current-Generator
PG-4-640-High-Voltage-Impulse-Generator
PG-4-641-High-Voltage-Pulse-Generator
PG-5-200-1-High-Voltage-Pulse-Generator
PG-5-200-2-High-Voltage-Pulse-Generator
PG-5-4500-High-Current-Pulse-Generator
PG-6-200-and-PG-6-400-Surge-Current-Generator
PG-6-200-and-PG-400-Surge-Current-Generator
PG-6-250-Varistor-Tester
PG-6-364-High-Voltage-Impulse-Generator
PG-6-401-High-Voltage-Pulse-Generator
PG-6-432-Surge-Current-Generator
PG-6-500-Surge-Generator
PG-6-2402-Surge-Current-Generator
PG-7-25-Combination-Wave-Generator
PG-7-250-Combination-Wave-Generator
PG-10-200-PG-12-360-High-Voltage-Pulse-Generators
PG-10-504-Combination-Wave-Generator
PG-10-1000-High-Voltage-Impulse-Generator
PG-10-2500-Surge-Current-Generator
PG-10-4000-Surge-Current-Generator
PG-10-6000-Surge-Current-Generator
PG-10-7000-Surge-Current-Generator
PG-10-8000-Surge-Current-Generator
PG-10-10000-Surge-Current-Generator
PG-10-12500-Surge-Current-Generator
PG-10-25000-Surge-Current-Generator
PG-12-400-Impulse-Wave-Generator
PG-12-804-Combination-Wave-Generator
PG-12-1440-High-Voltage-Impulse-Generator
PG-12-3600-Surge-Current-Generator
PG-14-1960-High-Voltage-Impulse-Generator
PG-16-4500-Surge-Current-Generator
PG-20-100-High-Voltage-HV-Pulse-Generator
PG-20-4000-High-Voltage-Impulse-Generator
PG-20-7000-Surge-Current-Generator
PG-20-10000-Surge-Current-Generator
PG-20-14000-Surge-Current-Generator
PG-24-2500-Surge-Test-Generator
PG-Family-Surge-Current-Generators
PIG-1500-Power-Induction-Generator
PU-12-A-B-DUT-Switchover
PVD-Pulse-Voltage-Divider
Remote-Control-Software
SCK-105-SURGE-CALIBRATION-KIT
SESD-216-ESD-Simulator-16-5-kv
SESD-230-ESD-Simulator-30-kV
SESD-3000-ESD-Simulator
SPG-1.2-25000-Sine-Wave-Pulse-Generator
STT-250-Anti-Interference-Isolating-Transformer
TAS-4-40-Transient-Data-Acquisition-System
TEM-2000-TEM-Measuring-Cell
TMS-2403-TMS-2406-Trigger-Module
Type-ISM-Current-Viewing-Resistors
Type-WSM-Current-Viewing-Resistors
USD-3801-USD-3802-Ultrasonic-Detector
VPS-250-16-Variable Power Source 250-16
WSM-Diagram

 

Industry Standards

Standard
Description
Data Sheet
IEC 61000-4-2
Electrostatic discharge immunity test
SESD 216
SESD 230
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-11
IEC 61000-4-8
IEC 61000-4-9
Surge/Burst immunity test, ± 5 kV
CE-TESTER 1
Surge/Burst immunity test  ± 5 kV
+ Power Fail
....
+ magnetic field immunity test
CE-TESTER 2
+ PFS/VPS

+ HI 100
IEC 61000-4-4
Electrical fast transient immunity test 5kV
EFTG 4510
IEC 61000-4-5
Surge immunity test, ± 5 kV, 2.5 kA
CE-SURGE / CE TESTER
± 7.0 kV, 3.5 kA
PG 7-250
± 10 kV, 5.0 kA
PG 10-504
± 12 kV, 6.0 kA
PG 12-804
± 24 kV, 12 kA
PG 24-2500
IEC 61000-4-8
Power frequency magnetic field immunity test
PFS 2516
+ HI 100
IEC 61000-4-9
Pulse magnetic field immunity test
HI 100
+ PG *.*
IEC 61000-4-10
Damped oscillatory magnetic field immunity test
IPG 2553
IEC 61000-4-11
Voltage dips, short interruptions and voltage variations immunity test
PFS 2516
CE-TESTER
+VPS
IEC 61000-4-12
ANSI C62.41
IEC 1008-1
 
Ring-wave immunity test
0.5µs/100kHz, ±6 kV
optional: Ring-wave test of RCCB´s
IPG 612T
IEC 61000-4-18
ANSI C37.90
Damped oscillatory wave immunity test
slow 100kHz/1MHz, ± 3 kV
fast 3/10/30 MHz, ± 4 kV
IPG 2554
IEC 61730-1/2
HV-Impulse Generate for solar modules
Impulse voltage 1.2/50, 10 KV, 250 J
Module capacitance from 10 - 183 nF
PG 10-200
IEC 61730-1/2
HV-Impulse Generate for solar modules
Impulse voltage 1.2/50, 12 KV, 360 J
Module capacitance from 10 - 183 nF
PG 12-360
Accessories:
IEC 61000-4-4
IEC 61000-4-5


Capacitive Coupling Clamp
Coupling-/Decoupling Network for Burst
EFTC 2012
CDN 4416B
Coupling-/Decoupling Networks for Surge/Burst
 
 
power supply lines, up to 5kV, 3*400V / 16A
CDN 4416
power supply lines, up to 5kV, 3*400V / 32A
CDN 4432
power supply lines, up to 5kV, 3*400V / 63A
CDN 4463
power supply lines, up to 7kV, 3*400V / 16A
CDN 6416
power supply lines, up to 7kV, 3*400V / 32A
CDN 6432
power supply lines, up to 7kV, 3*400V / 63A
CDN 6463
power supply lines, up to 10 kV, 3*400V / 16A
CDN 10416
power supply lines, up to 10 kV, 3*400V / 32A
CDN 10432
power supply lines, up to 10 kV, 3*400V / 63A
CDN 10463
power supply lines, up to 12 kV, 2*240V / 16A
CDN 12216
signal lines, up to 2.5 kV, 4*240V / 10A
CDN 2410
signal lines, up to 2.5 kV, 4*60V / 2A
CDN 2402
signal lines, up to 2.0 kV, 8*60V / 2A
CDN 2802
IEC 61000-4-4
   
Burst Calibration Kit
BCK 400F
IEC 61000-4-5
   
Surge Calibration Kit
SCK 105
IEC 61730-1/2
   
Capacitor Calibration Kit
CCK
 

Car Standards

 
Standard
 
Description
 
Data Sheet
ISO 7637-2
ISO 16750-2
The following tests are implemented
- Immunity to Surge, Pulse # 1, # 2, # 3
- Direct current supply voltage
- Over Voltage, Jump Start
- Slow decrease and increase of supply voltage  
- Discontinuities in supply voltage
- Damp Load Test A, Test B
Load switch:
- Power Supply Switch: 66V / 50A
- Power Supply Switch: 66V / 100A
- Power Supply Switch: 74V / 200A
Various power amplifier possible
CAR-TEST-
SYSTEM 14

ISO 7637-2
Transient Emission Test
- with load switch, electronic / mechanical
- with load resistors
CAR-TE14
ISO 16750-2
Load dump simulation, Pulse #5 / Test A+B
PG 2804
ISO 7637-2
Superimposed sinus ac Voltage Generator, 0-30 Khz; 30A
CAR SS A1250
ISO 16750-2
Power supply variation Pulses
66V 50A
66V 100A
74V 200A
PS 66-55
PS 66-110
PS 74-220
 
ISO 7637-2
Capacitive coupling clamp
CDN 2012 
ISO TR 10605
IEC61000-4-2
Electrostatic discharge immunity test
SESD 30 000
 

 

Telecom Standards

 
Standard
 
Description
 
Data Sheet
FCC Part 68
ITU-T, K44
CCITT Blue

Book
Telecom surge immunity test:
1.2/50µs ± 6 / 10 kV
IPG 620/1050
10/700µs, ±5 kV
PG 5-200-1
1.2/50µs, 10/700µs, ±5 kV
PG 5-200-2
1.2/50µs, 10/700µs, ±6.3 kV
optional: 0.5-1/700-1000µs
PG 6-364
1.2/50µs, 10/700µs, ± 10 kV
PG 10-1000
1.2/50µs, 10/700µs, ± 12 kV
PG 12-1440
0.5/700µs,10/700µs, ±14 kV
PG 14-1960
10/700µs, ± 20 kV
PG 20-4000
 
 
Telecom surge immunity test:
FCC Part 68
Belcore GR-1089
2/10µs, ± 5 kV   up to 4*100/500 A
PG 6-500
 
 
Telecom surge immunity test:
FCC Part 68
10/160 µs, ± 3.6 kV, 480 A
PG 4-641
 
 
Impulse life test / hold over test:
ITU-T   K44
CCITT  K12
10/700µs,10/1000µs,2*100A
PG 6-432
ITU-T   K44
CCITT  K12
impulse spark-over test: 100-5000 V/µs
> dc spark-over test: 0 - 637 V, 100 V/s
insulation resistance: 0.25 - 250 MOhm
IPG 506
ITU-T   K44
Power induction test
PIG 1.5-2000
 

 

EMC Test Equipment

 Industry

Data Sheet
Description:
 
SESD 216
ELECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 10 kV, air discharge up to 16.5 kV
> as specified in IEC 61000-4-2
SESD 230
LECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 30 kV, air discharge up to 30 kV
ESD 30000
ELECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 30 kV, air discharge up to 30 kV
as specified in IEC 61000-4-2 and ISO TR 10605
EFTG 4510
ELECTRICAL FAST TRANSIENT GENERATOR
simulates transient disturbances of the mains power supply caused by contact bouncing, waveform 5/50 ns, 0.2 - 5 kV, 1KHz-1MHz burst frequency, specified in IEC 61000-4-4
CE-TESTER
Compact EMC test unit,
designed for testing electromagnetic immunity against
pulsed and conducted interference according to IEC 61000-4-XX
  • Burst up to 5kV
  • Surge up to 5kV
  • Power freq. magnetic field 50Hz
  • Pulsed magnetic field 8/20µs
  • Voltage dips and variation
IPG 612T
RING-WAVE GENERATOR
simulates high-voltage transients of the mains power supply caused by switching in the major power system waveform 0.5µs/100 kHz, 6 kV, specified in IEC 61000-4-12, EN 61000-4-12, IEC 1008-1
IPG 2554
OSCILLATORY WAVE GENERATOR
simulates high-voltage transients of the mains power supply caused by switching in gas isolated substations of the major power system, specified in IEC 61000-4-12, EN 61000-4-18 slow damped oscillatory wave 100 kHz, 0 - 3 kV, rep. rate 40Hz slow damped oscillatory wave 1.0 MHz, 0 - 3 kV, rep. rate 400 Hz fast damped oscillatory wave 3/10/30 MHz, 0 - 4 kV, rep. rate 5 kHz
PFS 2516
POWER FAIL SIMULATOR
including motor driven variac 0 - 250 V / 16 A simulates transient interruptions and variation of the power supply voltage specified in IEC 61000-4-11
 

 

EFTG 4510 Accessories
Data Sheet
 
Description
Accessories for EFTG 4510
EFTC 2012
Capacitive Coupling Clamp
for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
BCK 400F
Burst Calibration Kit
including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling Networks for EFTG 4510
CDN 4416B
Coupling-/Decoupling Network
Coupling of BURST - pulses to power supply lines 3 * 400 V, 25 A
 

 

 CE Tester Accessories
Data Sheet
Description
 
Accessories for CE-TESTER
VPS 250-16
Variable Power Source
Motor driven variac, control by CE-TESTER
This sub-unit is necessary for generation of voltage variation according to IEC 61000-4-11
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 1000-4-8 / -9
EFTC 2012
Capacitive Coupling Clamp
for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
BCK 400F
Burst Calibration Kit
including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling for CE-TESTER 
CDN 4416
CDN 4432
CDN 4463 
pulses to power supply lines 3 * 400 V, 16 A, 32 A or 63 A, 
surge: max. test voltage  5 kV, 1.2/50µs
burst:  max. Test voltage  5 kV, 5/50ns
CDN 2402
pulses to data lines, 4 * 48 V, 2 A, max. test voltage:
2 kV, 1.2/50µs
CDN 2410
pulses to data lines, 4 * 240 V, 10 A, max. test voltage: 2 kV, 1.2/50µs
CDN 2802
pulses to data lines, 8 * 48 V, 10 A, max. test voltage: 2 kV, 1.2/50µs
 

 

EMC Test Equipment

 KFZ- Industry

Data Sheet
 
Description
 
CAR TEST SYSTEM 14
EMC Test System,
designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients.
The following tests are implemented:
- Immunity to Surge, Pulse # 1, # 2, # 3
- Direct current supply voltage
- Over Voltage, Jump Start
- Slow decrease and increase of supply voltage  
- Discontinuities in supply voltage
- Damp Load Test A, Test B
Load switch: 50/100/200A
Various power amplifier possible
according to DIN/ISO 7637-1/2 and ISO 16750-2
CAR TEST SYSTEM 14
Transient Emission Test
- with load switch, electronic / mechanical
- with load resistors
according to ISO 7637-1/2
CAR SS A1250
Superimposed sinus ac Voltage Generator
0 - 30kHz; 30A
according to ISO 7637-1/2
Load Dump Generator
PG 2804
Compact EMC test unit,
designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients.
Available impulse waveforms: 5 / Test A+B,
according to ISO 16750-2

 

 Car Tester Accessories
Data Sheet
Description
 
CDN 2012
Capacitive Coupling Clamp
interference of burst pulses to screened lines
according to IS= 7637-3
SESD 30000
ELECTRO STATIC DISCHARGE GENERATOR
Contact discharge and air discharge up to 30 kV
according to IEC 61000-4-2 and ISO/TR 10605
 

EMC Test Equipment

Combination Wave Generators (CWG)

Data Sheet
 
Description
 
CWG Series:
COMBINATION WAVE GENERATORS
Pulse voltage 1.2/50µs, Pulse current 8/20µs specified in IEC 61000-4-5, EN 61000-4-5, IEEE587, VDE0847-4-5
IPG 105
COMBINATION WAVE GENERATOR, IPG 105
Pulse voltage 1.2/50µs, - 1.0 kV, Pulse current 8/20µs, - 500 A
PG 2.5-32
COMBINATION WAVE GENERATOR, PG2.5-32
Pulse voltage 1.2/50µs, - 2,5 kV, Pulse current 8/20µs, -1.25 kA
CE SURGE / CE TESTER
COMBINATION WAVE GENERATOR, CE-SURGE
Pulse voltage 1.2/50µs, - 5 kV, Pulse current 8/20µs, - 2.5 kA
PG 7-250
COMBINATION WAVE GENERATOR, PG 6-204
Pulse voltage 1.2/50µs, - 6 kV, Pulse current 8/20µs, - 3.0 kA
PG 10-504
COMBINATION WAVE GENERATOR, PG 10-504
Pulse voltage 1.2/50µs, - 10 kV, Pulse current 8/20µs, - 5.0 kA
PG 12-804
COMBINATION WAVE GENERATOR, PG 12-804
Pulse voltage 1.2/50µs, - 12 kV, Pulse current 8/20µs, - 6.0 kA
PG 24-2500
COMBINATION WAVE GENERATOR, PG 24-2500
Pulse voltage 1.2/50µs, - 24 kV, Pulse current 8/20µs, - 12 kA
 
 
 CE-SURGE Accessories
Data Sheet
Description
 
 
Accessories for CE-SURGE
 
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Network for CE-SURGE 
CDN 4416
CDN 4432
CDN 4463
three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A
max. test voltage: 5 kV, 1.2/50µs
CDN 2402
for data lines, 4 * 48 V, 2 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2410
for data lines, 4 * 240 V, 10 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2802
for data lines, 8 * 48 V, 10 A, max. test voltage: 5 kV, 1.2/50µs
 
 
 PG 7-250 Accessories
Data Sheet
Description
 
Accessories for PG 7-250
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 7-250 
CDN 6416
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 16A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 6432
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 32A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 6463
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 63A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 2402
Coupling of BURST or SURGE - pulses to data lines, 4 * 48 V, 2 A
CDN 2410
Coupling of BURST or SURGE - pulses to data lines, 4 * 240 V, 10 A
 

 

 PG 10-504 Accessories
Data Sheet
Description
 
 Accessories for PG 10-504 
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 10-504 
CDN 10416
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 16 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 10432
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 32 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 10463
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 63 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 2402
Coupling of BURST or SURGE - pulses to data lines,
4 * 48 V, 2 A bzw. 4 * 240 V, 10 A
CDN 2410
Coupling of BURST or SURGE - pulses to data lines, 4 * 240 V, 10 A
 

 

 PG 12-804 Accessories
Data Sheet
Description
 
Accessories for PG 12-804
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 12-804
CDN 12216
Coupling-/Decoupling Network
Coupling of BURST or SURGE - pulses to power supply lines 2 * 240 V, 16 A
Surge: max. test voltage: 12 kV, 1.2/50µs
coupling mode: "line to line", "line to ground" and "common mode"
Burst:  max. test voltage: 4.5 kV, 5/50ns
according to IEC 61000-4-4 / -5, VDE 0847-4-4 / -5
 
 

CCITT Test Equipment, Series K

Designed for testing of gas discharge tubes for protection of telecommunication installations. 
Data Sheet
 
Description
 
Measurement of DC and impulse spark-over voltage of gas discharge tubes:
IPG 506
Front-chopped-wave Generator
Measurement of spark-over voltage of gas discharge tubes, according to CCITT.K12 / ITU-T, K44 Impulse voltage 5 kV: dU/dt = 100 V/µs - 5000 V/µs
DC-voltage      637 V: dU/dt = 100 V/s
 
 
Surge current testing of over-voltage protectors:
PG 6-200
Surge current generator: 5.0 kA, 8/20 µs
PG 6-400
Surge current generator: 10.0 kA, 8/20 µs
EMC 2015
Pulse Generator System
Mainframe with various pulse forming plug-in`s.
Pulse currents: 
8 / 20 µs,
 
 
20 kA,
1500 J
10 / 50 µs,
5 kA,
1500 J
10 / 350 µs,
600 A,
1500 J
10 / 700 µs,
300 A,
1500 J
10 / 1000 µs,
200 A,
1500 J
PG 6-2402
Surge current generator:  2 * 25 kA, 8/20 µs
PG 6-432
Impulse Life Test Generator
Designed for testing two-gap over-voltage protectors, specified in CCITT 12 TR 1, K12
Surge current : 
10 / 700 µs,
 
 
2 * 100 A,
360 J
10 / 1000 µs,
2 * 100 A,
360 J
HVTG 50-10
High-Voltage Test Unit
Designed for cw-testing of over-voltage protectors, specified in CCITT, 12 TR 1, K17
Open circuit output voltage : 2 kV-rms
Short circuit output current: 10 A-rms
> Test interval: CW or 0-999 cycles
High-voltage Pulse Generators designed for
testing telecom equipment:
PG 2-750
Surge current generator:  
according to FCC, Part 68, ANSI/TIA 968-A-2002
current wave : 
10 / 160 µs,
 
 
1600 V,
4 * 100 A
10 / 560 µs,
800 V,
2 * 100 A
Option 2:       
10 / 1000 µs,
 
 
1000 V,
 
2 * 100 A,
 
GR-1089-CORE
PG 6-500
Surge current generator:  
2/10 µs wave, according to GR-1089-CORE
first level lightning surge:
 
± 2500 V,
 
 
500 A,  2/10 µs,
 
 
4 wires
second level lightning surge:
 
± 5000 V,
500 A,  2/10 µs,
4 wires
intra building lightning surge:
 
±   800 V,
 
 
100 A,  2/10 µs,
 
 
4 wires
intra building lightning surge:
 
± 1500 V,
 
 
100 A,  2/10 µs,
 
 
4 wires
IPG 620
High-voltage Pulse Generator
Lightning surge: 1.2/50µs, 6 kV, 20 J, CCITT K22; ITU-T- K44 
IPG 1050
High-voltage Pulse Generator
Lightning surge: 1.2/50µs, 10 kV, 50J, CCITT K22; ITU-T- K44
PG 5-200-1
High-voltage Pulse Generator
Switching surge: 10/700 µs, 5 kV, 200 J, specified in 
CCITT K17-K22; ITU-T- K44
PG 5-200-2
High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 5 kV, 10 J, specified in
CCITT K17-K22; ITU-T- K44
Switching surge: 10/700 µs, 5 kV, 200 J, specified in
CCITT K17-K22; ITU-T- K44
PG 6-364
High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 6 kV, 20 J, specified in
CCITT K17-K22; ITU-T- K44
Switching surge 10/700 µs, 6 kV, 360 J, specified in
CCITT K17-K22; ITU-T- K44
One additional wave form available: 100/700 µs, 0.5/700 µs oder 1/1000 µs.
PG 10-1000
High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 10 kV, 50 J, specified in 
CCITT K17-K22; ITU-T- K44
Switching surge 10/700 µs, 10kV, 1000 J, specified in 
CCITT K17-K22; ITU-T- K44
PG 12-1440
High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 12 kV, 72 J, specified in CCITT 12 TR 1, K17, K20
Switching surge 10/700 µs, 12kV, 1440 J, specified in CCITT 12 TR 1, K17, K20
PG 14-1960
High-voltage Pulse Generator
Switching surge 10/700 µs, 14 kV, 2000 J, specified in 
CCITT K17-K22; ITU-T- K44
PG 20-4000
High-voltage Pulse Generator
Switching surge 10/700 µs, 20 kV, 4000 J, specified in 
CCITT K17-K22; ITU-T- K44
PG 4-640
High-voltage Pulse Generator
Switching surge 10/700 µs, 4 kV, 640 J, specified in ITU-T Spec. K44
PIG 1500
Power Induction Generator
designed for testing telecommunication ports, specified in CCITT, 12 TR 1, K20
Open circuit output voltage : 20 - 1500 V-rms, test time: 0.1 - 2.5 sec
Coupling impedance: + 0,5µF, + 1.0µF, //100 Ohm
Accessories
KN 100-4
Coupling Network
4 decoupling resistors 100 Ohm, specified in CCITT 12 TR1, K17, K20
CDN 5-64
Coupling Network
64 outputs, max. test voltage 5 kV, 10/700µs
designed for coupling to ISDN-Ports, output selectable: one of 64
CDN 5-80
Coupling Network
80 outputs, max. test voltage 5 kV, 10/700µs
designed for coupling to ISDN-Ports, outputs selectable: 20 of 80
 
 

High voltage pulse generators

 
Data Sheet
 
Description
 
Surge test of electrical insulations according to IEC 255
0.8/1.0/1.5/2.5/4.0/5.0/6.0/8.0 kV,
We = 0.5 J, Rs = 500 Ohm
Surge test of electrical insulations
Pulse voltage 1 - 12 kV, according to EN 60065
Measurement of isolation resistance, Riso > 2 MW
High-voltage Pulse Generator
designed for dielectric testing, lightning surge:
Pulse voltage 1.2/50 µs, 6 kV / 10 kV resp. 12 kV, 5 J / 12 J resp. 18 J
High-voltage Pulse Generator
designed for dielectric testing, lightning surge:
Pulse voltage 1.2/50 µs, 20 kV / 24 kV, 25 J / 36 J
High-voltage Pulse Generator
Pulse voltage 1.2/50 µs, 6 kV, 20 J, CCITT 12 TR 1, K17
High-voltage Pulse Generator
Pulse voltage 1.2/50 µs, 10 kV, 50 J, CCITT 12 TR 1 K17
High-voltage Pulse Generator
Pulse voltage 10/160 µs, 3600 V
Pulse power 10/160 µs, 480 A
 
High-voltage Pulse Generators
designed for dielectric testing of X/Y-capacitors and power line filters
 
Dielectric testing of X/Y-capacitors
Pulse voltage 1.7/46 µs 8 kV 9 J
Capacitor range 6.8/10/15/22 nF
Dielectric testing of X/Y-capacitors
Pulse voltage 1.6/46 µs 6 kV 400 J
Capacitor range 33/47/68/100/150/220/330/470 nF
High-voltage Pulse Generators
designed for shock test of solar modules
PG 10-200
Pulse voltage 1.2/50 µs 10 KV 250 J
to IEC/EN 60060-1, according to IEC/EN 61730-1/2 
PG 12-360
Pulse voltage 1.2/50 µs 12 KV 360 J
to IEC/EN 60060-1, according to IEC/EN 61730-1/2 
 
PG 10-200/ PG 12-360 Accessories
Data Sheet
 
Description
 
CCK
Capacitor Calibration Kit
 

High current pulse generators

 
Data Sheet
 
Description
 
SPG1-25k
Impulse Current for watt hour meters
0.5 - 7.5 KA
25 - 375 A
Sinus Halbw.
T/2 = 10 ms
25000J
PG 6-250
Varistor-Tester
10 - 2500 A
8/20 µs
250 J
PG 6-200
Pulse current
5 kA
8/20 µs
200 J
PG 6-400
Pulse current
10 kA
8/20 µs
400 J
EMC 2015
Pulse Generator System
Mainframe with various pulse forming plug-in`s. 
Pulse current:
 
 
25 kA
 
 
8 / 20 µs
 
 
1500 J
5 kA
10 / 50 µs
1500 J
600  A
10 / 350 µs
1500 J
300  A
10 / 700 µs
1500 J
200  A
10 / 1000 µs
1500 J
Pulse voltage:
10 kV
10 / 700 µs
1500 J
Combination
wave:
2*10 kV
1.2 / 50 µs
1500 J
2*10 kA
8 / 20 µs
1500 J
PG 6-2402
Pulse current generator
2 * 25 kA
8/20 µs
2400 J
PG 10-10000
Pulse current generator
2 * 50 kA
8/20 µs
10000 J
PG 12-3600
Pulse current generator
40 kA
8/20 µs
3600 J
PG 12-5000
Pulse current generator
50 kA
8/20 µs
5000 J
PG 15-5600
Pulse current generator
50 kA
8/20 µs
5600 J
PG 15-6600
Pulse current generator
70 kA
8/20 µs
6600 J
PG 16-4500
Pulse current generator
40 kA
8/20 µs
4500 J
PG 20-7000
Pulse current generator
50 kA
8/20 µs
7000 J
PG 20-14000
Pulse current generator
100 kA
8/20 µs
14000 J
PG 10-2500
Pulse current generator
500 A
10/700 µs
2500 J
PG 10-4000
Pulse current generator
500 A
10/1000 µs
4000 J
PG 10-6000
Pulse current generator
10 kA
10/50 µs
6000 J
PG 10-8000
Pulse current generator
1.0 kA
10/1000 µs
8000 J
PG 10-25000
Pulse current generator
10 kA
10/350 µs
25 kJ
PG 10-7000
Pulse current generator
2.5KA
10/350 µs
7000J
PG 15-27k
Pulse current generator
75 kA
20/75 µs
27 kJ
PG 5-35k
Pulse current generator
10 kA
10/2500 µs
35 kJ
PG 2.5-120k
Pulse current generator
20 kA
50/1000 µs
120 kJ
Accessories
PA 503
PA 505/525

SAFETY TEST CABINET
designed for high-voltage testing of components, PCB´s etc. prevents accidental contact with live parts of test object.
Test voltage: 10 kV, Safety interlock connector.
additional types: PA 503, PA 505/525
 

High-voltage Test and Measurement Equipment

AC and DC

 
Data Sheet
 
 Description
 
AC-TESTER
Compact high-voltage test unit,
designed for dielectric testing of electrical isolations and measurement of protective earth resistance and insulation resistance, according to IEC/VDE.
  • High-voltage test, up to 5 kVac, 100 mA
  • Measurement of protective earth resistance
  • Measurement of insulation resistance
  • Measurement of leakage current
  • Measurement of supply current
AC-TESTER 6
High Voltage AC test set
10 kV ac, 100 mA
HVTS 30-20
HVTS 30-40
High Voltage AC test set
30 kV ac, 20 mA / 40 mA
HVTS 50-10
High Voltage AC test set
50 kV ac, 10 mA
HTS 20-5
High Voltage DC test set
20 kV dc, 5 mA
HTS 20-10
High-voltage DC test set
20 kV dc, 10 mA
Accessories 
PA 503
Safety test cabinet
additional types: PA 505
 
 

High voltage measurement equipment

 
Data Sheet
 
Description
 
TAS 4-40
Transient Data Acquisition System TAS 4-40
Potential-free measurement of fast rise pulses
HVM 2015
High-voltage measurement equipment
for AC, DC and Pulse voltages
Usable with all Hilo-Test high-voltage dividers 
HVT XXX RCR 
 

 Calibration equipment

Data Sheet
 
Description
 
Calibration equipment, IPG 250
step response measurement
 

High voltage dividers

Data Sheet
 
Description
 
High-voltage dividers for AC, DC- or impulse voltage
Broad band high voltage dividers HVT *** RCR
for DC- AC- and impulse voltages
HVM 2015
High-voltage measurement equipment
for AC, DC and Pulse voltages
Usable with all Hilo-Test high-voltage dividers HVT XXX RCR
PVD
Pulse voltage divider
For impulse voltage 1,2/50 us,  until max. 12 KV 
Ratio 100:1, 1000:1
 

Shunts

Data Sheet
 
Description
 
ISM***
Current measuring resistors for high pulse currents
Dimensions
WSM***
Current measuring resistors for high ac currents
Dimensions
 

Safety Test Cabinet

Data Sheet
 
Description
 
PA 503
Safety test cabinet
Test space ca. W*H*D: 400 / 140 / 250 
PA 501/502
Safety test cabinet
Test space ca. W*H*D: 440 / 180 / 300           
PA 505/525
Safety test cabinet
Test space ca. W*H*D: 400 / 250 / 400 
PA 504
Safety test cabinet
Test space ca. W*H*D: 490 / 300 / 300 
 
 

 Miscellaneous

Data Sheet
 
Description
 
 
High voltage power supplies, Capacitor charging units
 
HSN ***
High voltage switch mode power supplies
HCN ***
Capacitor charging units
HVG *** S
Precision high voltage power supplies with series regulator
Trigger Modules 
TMS 2403,
TMS 2404,
TMS 2405,
TMS 2406
Trigger module
MCT 5002, MCT 5004
Multi channel trigger unit
Trigger transformers
IT 5413
Trigger transformers for ignitions
TS 410, TS 510, IT 5425
Trigger transformer for spark gaps
Miscellaneous
STT 250
Anti interference isolating transformer
ITT 250-20
Isolating transformer
HS 10...HS 50
High voltage ground switch
USD 3801/3802
Ultrasonic detector for e.g. partial discharge
TEM 2000
TEM Test cell
 

 Software

Data Sheet
 
Description
 
 
Hilo-Remote / Remote Control
For almost every HILO-Test device there is PC software available.
With a PC and this software the equipment can be operated over the LAN Ethernet or a USB/RS232 interface
 
PC Interface
USB
LAN Ethernet interface Adapter for optically isolated connection between the device and PC, with the necessary drivers
 
PC Interface
Ethernet
USB / RS232 Interface Adapter for optically isolated connection between the device and PC, with the necessary drivers
 
 
Lab-View drivers for devices on request
 
 
Request a Quote / Contact Us!

 

 

Hilo-Test product Line

HILO-TEST Company Information

HILO-TEST Product Categories:
AC DC Test Equipment
Accessories
Automotive EMC Test Systems
Burst (EFTG) Simulators / Burst Calibration Kit
Coupling Network (CDN)
ESD Generators
High Voltage Dividers
Impulse Current Generators
Impulse Voltage Generators
Miscellaneous Products
Multifunction Generators
Oscillatory wave generator systems
Power Fail Generators
Ring-wave Generators
Shunts
Software
Surge (Hybrid) Generators
Telecom Generators

HILO-TEST PRODUCTS BY STANDARDS CATAGORIES
EMC Test Equipment
CCITT Test Equipment, Series K
 
Component Test Generators
  • • High Voltage Pulse Generators
    • • PG 10-200/PG 12-360 Accessories
    • High Current Pulse Generator
High Voltage Test and Measurement Equipment
  • • AC and DC
    • High Voltage Measurement Equipment
    • Calibration Equipment
Other Products

Reliant EMC Product Lines