Reliant EMC

EMC Test Equipment

Hilo-Test EMC Test Equipment by Industry STandards

 

 Industry Standards

Data Sheet
Description:
 
SESD 216
ELECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 10 kV, air discharge up to 16.5 kV
> as specified in IEC 61000-4-2
SESD 230
LECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 30 kV, air discharge up to 30 kV
ESD 30000
ELECTRO STATIC DISCHARGE GENERATOR
simulates disturbances caused by electrostatic discharge
contact discharge up to 30 kV, air discharge up to 30 kV
as specified in IEC 61000-4-2 and ISO TR 10605
EFTG 4510
ELECTRICAL FAST TRANSIENT GENERATOR
simulates transient disturbances of the mains power supply caused by contact bouncing, waveform 5/50 ns, 0.2 - 5 kV, 1KHz-1MHz burst frequency, specified in IEC 61000-4-4
CE-TESTER
Compact EMC test unit,
designed for testing electromagnetic immunity against
pulsed and conducted interference according to IEC 61000-4-XX
  • Burst up to 5kV
  • Surge up to 5kV
  • Power freq. magnetic field 50Hz
  • Pulsed magnetic field 8/20µs
  • Voltage dips and variation
IPG 612T
RING-WAVE GENERATOR
simulates high-voltage transients of the mains power supply caused by switching in the major power system waveform 0.5µs/100 kHz, 6 kV, specified in IEC 61000-4-12, EN 61000-4-12, IEC 1008-1
IPG 2554
OSCILLATORY WAVE GENERATOR
simulates high-voltage transients of the mains power supply caused by switching in gas isolated substations of the major power system, specified in IEC 61000-4-12, EN 61000-4-18 slow damped oscillatory wave 100 kHz, 0 - 3 kV, rep. rate 40Hz slow damped oscillatory wave 1.0 MHz, 0 - 3 kV, rep. rate 400 Hz fast damped oscillatory wave 3/10/30 MHz, 0 - 4 kV, rep. rate 5 kHz
PFS 2516
POWER FAIL SIMULATOR
including motor driven variac 0 - 250 V / 16 A simulates transient interruptions and variation of the power supply voltage specified in IEC 61000-4-11
 
EFTG 4510 Accessories
Data Sheet
 
Description
Accessories for EFTG 4510
EFTC 2012
Capacitive Coupling Clamp
for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
BCK 400F
Burst Calibration Kit
including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling Networks for EFTG 4510
CDN 4416B
Coupling-/Decoupling Network
Coupling of BURST - pulses to power supply lines 3 * 400 V, 25 A
 
 CE Tester Accessories
Data Sheet
Description
 
Accessories for CE-TESTER
VPS 250-16
Variable Power Source
Motor driven variac, control by CE-TESTER
This sub-unit is necessary for generation of voltage variation according to IEC 61000-4-11
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 1000-4-8 / -9
EFTC 2012
Capacitive Coupling Clamp
for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
BCK 400F
Burst Calibration Kit
including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling for CE-TESTER 
CDN 4416
CDN 4432
CDN 4463 
pulses to power supply lines 3 * 400 V, 16 A, 32 A or 63 A, 
surge: max. test voltage  5 kV, 1.2/50µs
burst:  max. Test voltage  5 kV, 5/50ns
CDN 2402
pulses to data lines, 4 * 48 V, 2 A, max. test voltage:
2 kV, 1.2/50µs
CDN 2410
pulses to data lines, 4 * 240 V, 10 A, max. test voltage: 2 kV, 1.2/50µs
CDN 2802
pulses to data lines, 8 * 48 V, 10 A, max. test voltage: 2 kV, 1.2/50µs
 

Hilo-Test EMC Test Equipment for KFZ Industry Standards

 

 KFZ- Industry Standards

Data Sheet
 
Description
 
CAR-TEST-SYSTEM 14
EMC Test System,
designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients.
The following tests are implemented:
- Immunity to Surge, Pulse # 1, # 2, # 3
- Direct current supply voltage
- Over Voltage, Jump Start
- Slow decrease and increase of supply voltage  
- Discontinuities in supply voltage
- Damp Load Test A, Test B
Load switch: 50/100/200A
Various power amplifier possible
according to DIN/ISO 7637-1/2 and ISO 16750-2
CAR-TE14
Transient Emission Test
- with load switch, electronic / mechanical
- with load resistors
according to ISO 7637-1/2
CAR-SS-A1250
Superimposed sinus ac Voltage Generator
0 - 30kHz; 30A
according to ISO 7637-1/2
Load Dump Generator
PG 2804
Compact EMC test unit,
designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients.
Available impulse waveforms: 5 / Test A+B,
according to ISO 16750-2
 
 Car Tester Accessories
Data Sheet
Description
 
CDN 2012
Capacitive Coupling Clamp
interference of burst pulses to screened lines
according to IS= 7637-3
SESD 30000
ELECTRO STATIC DISCHARGE GENERATOR
Contact discharge and air discharge up to 30 kV
according to IEC 61000-4-2 and ISO/TR 10605

 

EMC Test Equipment

Combination Wave Generators (CWG)

Data Sheet
 
Description
 
CWG Series:
COMBINATION WAVE GENERATORS
Pulse voltage 1.2/50µs, Pulse current 8/20µs specified in IEC 61000-4-5, EN 61000-4-5, IEEE587, VDE0847-4-5
IPG 105
COMBINATION WAVE GENERATOR, IPG 105
Pulse voltage 1.2/50µs, - 1.0 kV, Pulse current 8/20µs, - 500 A
PG 2.5-32
COMBINATION WAVE GENERATOR, PG2.5-32
Pulse voltage 1.2/50µs, - 2,5 kV, Pulse current 8/20µs, -1.25 kA
CE-SURGE
COMBINATION WAVE GENERATOR, CE-SURGE
Pulse voltage 1.2/50µs, - 5 kV, Pulse current 8/20µs, - 2.5 kA
PG 7-250
COMBINATION WAVE GENERATOR, PG 6-204
Pulse voltage 1.2/50µs, - 6 kV, Pulse current 8/20µs, - 3.0 kA
PG 10-504
COMBINATION WAVE GENERATOR, PG 10-504
Pulse voltage 1.2/50µs, - 10 kV, Pulse current 8/20µs, - 5.0 kA
PG 12-804
COMBINATION WAVE GENERATOR, PG 12-804
Pulse voltage 1.2/50µs, - 12 kV, Pulse current 8/20µs, - 6.0 kA
PG 24-2500
COMBINATION WAVE GENERATOR, PG 24-2500
Pulse voltage 1.2/50µs, - 24 kV, Pulse current 8/20µs, - 12 kA
 
 CE-SURGE Accessories
Data Sheet
Description
 
 
Accessories for CE-SURGE
 
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Network for CE-SURGE 
CDN 4416
CDN 4432
CDN 4463
three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A
max. test voltage: 5 kV, 1.2/50µs
CDN 2402
for data lines, 4 * 48 V, 2 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2410
for data lines, 4 * 240 V, 10 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2802
for data lines, 8 * 48 V, 10 A, max. test voltage: 5 kV, 1.2/50µs
 

 

 PG 7-250 Accessories
Data Sheet
Description
 
Accessories for PG 7-250
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 7-250 
CDN 6416
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 16A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 6432
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 32A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 6463
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 63A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns
CDN 2402
Coupling of BURST or SURGE - pulses to data lines, 4 * 48 V, 2 A
CDN 2410
Coupling of BURST or SURGE - pulses to data lines, 4 * 240 V, 10 A

 

 PG 10-504 Accessories
Data Sheet
Description
 
 Accessories for PG 10-504 
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 10-504 
CDN 10416
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 16 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 10432
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 32 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 10463
Coupling of BURST or SURGE - pulses to power supply lines 3 * 400 V, 63 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns
CDN 2402
Coupling of BURST or SURGE - pulses to data lines,
4 * 48 V, 2 A bzw. 4 * 240 V, 10 A
CDN 2410
Coupling of BURST or SURGE - pulses to data lines, 4 * 240 V, 10 A
 

 

 PG 12-804 Accessories
Data Sheet
Description
 
Accessories for PG 12-804
HI 100
Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105
Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 12-804
CDN 12216
Coupling-/Decoupling Network
Coupling of BURST or SURGE - pulses to power supply lines 2 * 240 V, 16 A
Surge: max. test voltage: 12 kV, 1.2/50µs
coupling mode: "line to line", "line to ground" and "common mode"
Burst:  max. test voltage: 4.5 kV, 5/50ns
according to IEC 61000-4-4 / -5, VDE 0847-4-4 / -5

 

Request a Quote / Contact Us!

 

 

Hilo-Test product Line

HILO-TEST Company Information

HILO-TEST Product Categories:
AC DC Test Equipment
Accessories
Automotive EMC Test Systems
Burst (EFTG) Simulators / Burst Calibration Kit
Coupling Network (CDN)
ESD Generators
High Voltage Dividers
Impulse Current Generators
Impulse Voltage Generators
Miscellaneous Products
Multifunction Generators
Oscillatory wave generator systems
Power Fail Generators
Ring-wave Generators
Shunts
Software
Surge (Hybrid) Generators
Telecom Generators

HILO-TEST PRODUCTS BY STANDARDS CATAGORIES
EMC Test Equipment
CCITT Test Equipment, Series K
 
Component Test Generators
  • • High Voltage Pulse Generators
    • • PG 10-200/PG 12-360 Accessories
    • High Current Pulse Generator
High Voltage Test and Measurement Equipment
  • • AC and DC
    • High Voltage Measurement Equipment
    • Calibration Equipment
Other Products

Reliant EMC Product Lines