Reliant EMC

York Reference Source - YRS01

The YRS01 is a multi-mode reference source (Comb and Noise Generator) capable of producing a broadband noise or comb output up to 1GHz.
· Selectable noise or comb output
· Flexibility across a range of applications
· Stable output
· Repeatable measurements
· 5 kHz to 1 GHz output
· Applications across a broad frequency spectrum
· Compact and portable
· Comparisons between sites and environments
· Battery powered
· No power or interconnecting cable effects on measurements
 
York EMC Services YRS01 York Reference Source
YRS01
YRS01 on BP01
YRS01 on BP01
 
 
 
The YRS01 is a broadband noise and comb source that is capable of producing a continuous noise output from 9 kHz to 1 GHz, or a comb of frequencies within the 5 kHz to 1 GHz range, with step size being selected by the user. The noise generator enables observation of details over the full spectral range, while the comb generator allows for the reference signal output and noise floor to be viewed simultaneously.
 
The YRS01 is compatible with the BP01 battery pack, or alternatively can be powered using an external USB supply.
The YRS01 has been designed specifically to complement the CGE range of comb generators, and can be supplied as part of the CGE kits to provide a reference source solution covering 5 kHz to 18 GHz and over.

 

Radiated Emissions

For radiated operation two monopole antennas, optimized for different frequency bands, are available which attach to the top of the unit. The YRS01 is an ideal source for carrying out checks on open area test sites (OATS) and anechoic chambers.
The YRS01 is compact and battery powered, allowing operation as an electrically small source, which minimizes the effect of the YRS01 itself when characterizing the electromagnetic environment. The YRS01 is housed in a metal enclosure so that it can be mounted in direct contact with a metal ground plane as may be required by some tests.

 

Conducted Emissions

An N-type connector provides a direct 50Ω matched output, which can be used to carry out checks on conducted measurement systems. Two adapters are available as optional accessories:
  • The LSA03 provides a capacitive link from the output of the YRS01 to a standard IEC 320 mains power connector. This allows checks and investigations on conducted measurement systems to be made, for example using a LISN or an absorbing clamp.
  • The NIA01 provides an interface to RJ11, RJ14, RJ25 and RJ45 standard connectors for conducted measurements using an ISN.

     

Applications

  • Comparison between different measurement environments such as OATS or anechoic chambers
  • Radiated measurement systems validation and verification
  • Reference source for:
    • · Daily pre-test checks if required by the accreditation authorities
    • · Long-term performance monitoring
    • · Spectrum analyzer / receiver pre-check
  • · Measuring amplifier gain and bandwidth
  • · Spectrum analyzer/receiver pre-check

 

YRS01KIT01 reference noise/comb source

  • YRS01 reference noise/comb source kit.
  • Includes:
  • · YRS01 "CGE style" 9 kHz to 1 GHz switchable noise/comb source
  • · MON03 monopole antenna (200 MHz to 1 GHz optimum)
  • · Manual
  • · BP01 (5V, 2 AHr battery pack)
  • · BCH04 battery charger
  • · Case
  • · CAL16 (output power from 9 kHz to 1 GHz measured using a spectrum analyzer, all modes).
  • · Shipping Container 52x42x28cm, 5kg (Shipping Container with unit)

 

YRS01KIT02 reference noise/comb source

  • YRS01 reference noise/comb source kit.
    Includes:
    · YRS01 "CGE style" 9 kHz to 1 GHz switchable noise/comb source
    · MON03 monopole antenna (200 MHz to 1 GHz optimum)
    · TLM02 top-loaded monopole (30 MHz to 300 MHz optimum)
    · LSA03 LISN adapter
    · Manual
    · BP01 (5V, 2 AHr battery pack)
    · BCH04 battery charger
    · Case
    · CAL16 (output power from 9 kHz to 1 GHz measured using a spectrum analyzer, all modes)
    · Shipping Container 52x42x28cm, 5kg (Shipping Container with unit)

     

    Accessories

TLM01
100 mm long top-loaded monopole antenna, 200 MHz to 1 GHz optimum. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
TLM02
270 mm long top-loaded monopole antenna, 30 MHz to 300 MHz optimum. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
MON02
Telescopic monopole antenna approx 1 m. For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02
MON03
270 mm long monopole antenna, 200 MHz to 1 GHz optimum.  For CNE III, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03
MCN03
120 mm diameter monocone antenna, 1 GHz to 6 GHz optimum. For CNE III, CNE V+, CNE VI and YRS03
LSA03
LISN adaptor with IEC type connector
NIA01
ISN adapter with 6-way RJ11/RJ14/RJ25 and 8-way RJ45 connector

 

Shipping Container dimensions and weight information

Shipping Container

Weight (Container & Unit)

52x42x28cm
5kg
 
All freight documentation for Repairs and Calibrations must include: “Import under IPR CPC 5100001 – Goods of UK origin returned for repair/calibration - Items are to be imported under IPR CPC 5100001 being goods of UK origin, temporarily returned for repair/recalibration”

 

Associated Downloads

 

Press Release:

 
Request a Quote / Contact Us!

York EMC Servcies

Eurofins York Products