Standards # |
Description of the standard |
Products REQUIRED
FOR the standard |
IEC Standards  |
|
Electromagnetic compatibility (EMC)
Part 1: General - Section 1:
Application and interpretation of fundamental definitions and terms |
|
|
Electromagnetic compatibility (EMC)
Part 2: Environment - Section 1:
Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signaling in public power supply systems |
|
|
Electromagnetic compatibility (EMC)
Part 3-2 - Limits
Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase) |
|
|
Electromagnetic compatibility (EMC)
Part 3-3 – Limits
Limits for voltage fluctuation and flicker
(equipment input current ≤ 16 A per phase) |
|
|
Electromagnetic compatibility (EMC)
Part 3-4: Limits
Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
|
|
Electromagnetic compatibility (EMC)
Part 3: Limits
Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
|
|
|
Electromagnetic compatibility (EMC)
Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-3: Testing and measurement techniques
Radiated, radio-frequency, electromagnetic field immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-4: Testing and measurement techniques
Electrical fast transient/burst immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-5: Testing and measurement techniques
Surge immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-6: Testing and measurement techniques
Immunity to conducted disturbances, induced by radio-frequency fields |
|
|
Electromagnetic compatibility (EMC)
Part 4-7: Testing and measurement techniques
General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
|
|
Electromagnetic compatibility (EMC)
Part 4-8: Testing and measurement techniques
Power frequency magnetic field immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-9: Testing and measurement techniques
Pulse magnetic field immunity test |
|
|
Electromagnetic compatibility (EMC)
Part 4-11: Testing and measurement techniques
Voltage dips, short interruptions and voltage variations immunity tests |
• |
|
Electromagnetic compatibility (EMC)
Part 6-1: Generic standards
Immunity for residential, commercial and light-industrial environments
Intended for use in residential, commercial and light-industrial environments.
Immunity requirements in the frequency range 0 Hz to 400 GHz are covered |
|
|
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards
Immunity for industrial environments - intended for use in industrial environments, as described below.
Immunity requirements in the frequency range 0 Hz to 400 GHz are covered |
|
|
Electromagnetic compatibility (EMC)
Part 6-3: Generic standards
Emission standard for residential, commercial and light-industrial environments
|
|
|
Electromagnetic compatibility (EMC)
Part 6-4: Generic standards
Emission standard for industrial environments |
|
IEC 60512-23-3 |
Line Injection Method
(frequency domain) |
|
IEC 62153-4-6: 2006 |
Line Injection Method
(frequency domain) |
|
IEC 96-1 Amendment 2 1993-06 section A.5.6 |
Line Injection Method
(frequency domain)
|
|
EN Standards emissions- European Standards concerning Emissions |
EN50081-1 |
European Generic emission standard
Part 1
Domestic, commercial and light industry environment
Replaced by IEC/RT EN 61000-6-3
|
|
EN50081-2 |
European Generic emission standard
Part 2
industrial environment
replaced by IEC/RT EN 61000-6-4
|
|
EN50082-1 |
European immunity standard
Part1
Domestic, commercial and light industry environment
Replaced by IEC/RT EN 61000-6-1
|
|
EN50082-2 |
European immunity standard
Part 2
Industrial environment
Replaced by IEC/RT EN 61000-6-2
|
|
EN55011 |
European limits and methods of measurement of radio disturbance characteristics for scientific and medical equipment
|
|
EN55013 |
European limits and methods of measurement of radio disturbance characteristics of broadcast receivers
|
|
EN55014 |
European limits and methods of measurement of radio disturbance characteristics of household appliances and power tools, replaced by EN55014-1, and immunity part is covered by EN55014-2
|
|
EN55015 |
European limits and methods of measurement of radio disturbance characteristics of fluorescent lamps
|
|
EN55022 |
European limits and methods of measurement of radio disturbance characteristics of information technology equipment
|
|
EN55025 |
Radio disturbance characteristics for the protection receivers used on board vehicles, boats, and on devices
|
|
EN60555
part 2 & part 3 |
Disturbances of power supply network (part 2) and power fluctuations (part 3) caused by of household appliances and power tools
Replaced by EN61000-3-2 and EN61000-3-3
|
|
EN 50289-1-6 |
Line injection method |
|
EN 2591-212 |
Line injection method |
|
EN13309 |
Construction Machinery - Electromagnetic compatibility of machines with internal electrical power supplies |
|
EN 50147.1 |
Shielded room attenuation |
|
EN 6100-3-2 |
Harmonic |
|
EN 6100-3-12 |
Harmonic |
|
EN 6100-3-11 |
Flicker |
|
EN 61000-4-11 |
Voltage variation |
|
EN 61000-4-13 |
Harmonics |
|
EN 61000-4-14 |
Voltage fluctuation |
|
EN 61000-4-17 |
Ripple on d.c. supply |
|
EN 61000-4-27 |
Unbalance |
|
EN 61000-4-28 |
Frequency variation |
|
EN 61000-4-29 |
d.c. voltage variation |
|
EN 6100-3-11 |
Flicker |
|
VDE STANDARDS |
|
|
VDE 0875 |
German EMC directive for broadband interference generated by household appliances
|
|
VDE 0871 |
German EMC directive for broadband and narrow band interference generated by information technology equipment
|
|
ISO Standards |
ISO 7637 |
Road vehicles -- Electrical disturbances from conduction and coupling |
|
|
Road vehicles
Part 1: General and definitions
Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy
|
|
|
Road vehicles
Part 2: Off-vehicle radiation source
Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy
|
|
|
Road vehicles
Part 3: On-board transmitter simulation
Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy
|
|
|
Road vehicles - Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy
Part 4: Bulk current injection (BCI)
|
|
|
|
Road vehicles
Electrical disturbances by narrow band radiated electromagnetic energy
Component test methods
|
|
|
Earthmoving Machinery
Electromagnetic Compatibility
|
|
| ISO 14982 |
Agricultural and forestry machinery
Electromagnetic compatibility
Test methods and acceptance criteria |
|
ISO 16759-2 |
|
|
ISO/CD 21848.5 |
|
|
|
|
|
CISPR Standards |
CISPR 11 |
Industrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic disturbance characteristics Limits and methods of measurement
|
|
CISPR 12 |
Vehicles, boats and internal combustion engine driven devices
Radio disturbance characteristics
Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
|
|
|
Electromagnetic compatibility
Part 1: Emission
Requirements for household appliances, electric tools and similar apparatus
|
|
CISPR 14-2 |
Electromagnetic compatibility
Part 2: Immunity - Product family standard
Requirements for household appliances, electric tools and similar apparatus |
|
CISPR 15 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
|
|
|
Specification for radio disturbance and immunity measurement apparatus and methods
Part 1: Radio disturbance and immunity measuring apparatus
|
|
|
Specification for radio disturbance and immunity measurement apparatus and methods
Part 2: Methods of measurement of disturbances and immunity
|
|
CISPR 16-3 |
Specification for radio disturbance and immunity measurement apparatus and methods
Part 3: Reports and recommendations of CISPR
|
Standard for EMC Test Equipment |
CISPR 16-4 |
Part 4-1: Uncertainties, statistics and limit modeling
Uncertainties in-standardized EMC tests |
Standard for EMC Test Equipment |
CISPR 22 |
Information technology equipment
Radio disturbance characteristics
Limits and methods of measurement
|
|
CISPR 24 |
Information technology equipment
Immunity characteristics
Limits and methods of measurement |
|
CISPR 25 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics
Limits and methods of measurement for the protection of on-board receivers |
|
EN Standards Immunity - European Standards concerning Immunity |
EN50082 Part 1 |
European immunity standard
Part 1:
Domestic, commercial and light industry environment
Replaced by EN61000-6-1
|
|
EN50082 Part 2 |
European immunity standard, part2: industrial environment
Replaced by EN61000-6-2
|
|
EN50093 |
European
Immunity to short dips in the power supply
|
|
EN55020 |
European
Immunity from radio interference of broadcast receivers
|
|
EN55024 |
European
Immunity requirements for information technology equipment
|
|
EN55101 |
older draft of immunity requirements for information technology equipment
Replaced by EN55024
|
|
EN50081 Part 1 |
European Generic emission standard
Part 1
Domestic, commercial and light industry environment, replaced by EN61000-6-3
|
|
EN50081 Part 2 |
European immunity requirements for information technology equipment, replaced by EN61000-6-4 |
|
USA Standards |
FCC Part 15 Class A |
Subpart A contains a general provision that
"devices may not cause interference and must accept interference from other sources."
|
|
FCC Part 15 Class B |
US limits and methods of measurement of radio disturbance, measuring radio waves accidentally emitted from devices not specifically designed to emit radio waves ("unintentional"), both directly ("radiated") and indirectly ("conducted")
|
|
GR-1089-CORE |
Electromagnetic Compatibility and Electrical Safety
Generic Criteria for Network Telecommunications Equipment |
|
ASTM – D4935 |
Electromagnetic Shielding Effectiveness of Planar Materials over frequency range 30-1500MHz |
|
Military Standards |
|
|
MIL-STD-461E |
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment
|
|
MIL-STD-462D |
Measurement of Radio Frequency Spectrum Characteristics, Superseded by MIL-STD-461E
|
|
MIL-STD-464 |
Electromagnetic Environmental Effects Requirements for Systems
|
|
MIL-STD-469 |
Radar Engineering Interface Requirements, Electromagnetic Compatibility Metric
|
|
MIL-STD-1542B |
Electromagnetic Compatibility and Grounding Requirements for Space System Facilities
|
|
Def-Std 59-41 |
This Part of the Defense Standard describes the methods of test to be applied, and where appropriate the limits required to be met when measuring the electromagnetic compatibility of Man Worn, Man Portable Equipment for Ministry of Defense use |
|
EIA-364-66A used by MIL-DTL-38999K |
The method allows highly repeatable SE measurements at frequencies between 1GHz and 10GHz. |
|
MIL STD vs. EU Standards References |
| |
|
|
| |
Engineering Guides of MIL STD vs. EU Standards |
|
| |
Spitzenberger & Spies |
Emission |
|
|
Standard |
Description |
Necessary SPS Products |
IEC/EN 61000-3-2 |
Limits for harmonics on supply networks up to 16A |
|
IEC/EN 61000-3-3 |
Limits on voltage variations and flicker on supply networks up to 16A |
|
IEC/EN 61000-3-11 |
Limits on voltage variations and flicker on supply networks up to 75A |
|
IEC/EN 61000-3-12 |
Limits for harmonics on supply networks up to 75A |
|
|
|
|
Immunity |
|
|
IEC/EN 61000-4-4 |
Immunity against fast transient signals - burst |
|
IEC/EN 61000-4-5 |
Immunity against voltage pulses - surge |
|
IEC/EN 61000-4-8 |
Immunity against magnetic fields with power line frequencies |
|
IEC/EN 61000-4-11 |
Immunity against voltage dips, short interruptions and voltage variations |
|
IEC/EN 61000-4-13 |
Harmonics and inter-harmonics including mains signaling at AC power port |
|
IEC/EN 61000-4-14 |
Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
|
IEC/EN 61000-4-17 |
Ripple on d.c. input power |
|
IEC/EN 61000-4-27 |
Unbalance, immunity test |
|
IEC/EN 61000-4-28 |
Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
|
IEC/EN 61000-4-29 |
Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
|
IEC/EN 61000-4-34 |
Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase |
|
Solar |
|
|
IEC/EN 50530 |
Overall performance testing of solar inverters |
|
IEC/EN 62116 |
Test procedure of islanding prevention measures for utility-interconnected photo-voltaic inverters |
|
IEC/EN 60146-1-1 |
Semiconductor converters – General requirements and line commutated converters |
|
IEC/EN 61131-2 |
Programmable controllers –. Part 2: Equipment requirements and tests |
|
IEC/EN 61496-1 |
Safety of machinery - Electro-sensitive protective equipment |
|
Road vehicles |
|
|
ISO 7637 |
Road vehicles -- Electrical disturbances from conduction and coupling |
|
ISO 16750-2 |
Road vehicles—Environmental conditions and electrical testing for electrical and electronic equipment |
|
ISO 21848 |
Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads |
|
BMW |
GS 95002, GS 95003-2 |
|
Daimler Chrysler |
DC-10615 |
|
Fiat |
9.90110 |
|
Ford |
EMC-CS-2009.1, ES-XW7T-1A278-AC |
|
GMW |
GMW 3097 |
|
|
|
|
Results Of Detailed Comparisons Of Individual EMC Requirements And Test Procedures Delineated In Major National And International Commercial Standards With Military Standard MIL-STD-461E