Reliant EMC

mk-messtechnik U2/12 2 Channel Analog

mk-messtechnik Us/12 and U2/12-1M 2 channel analog
mk messtechnik 2 Channel Analog
The U2/12 and US/12-1M are used for the optical, digital transmission of up to 2 analog signals with a resolution of min. 8 Bit each channel.
Both U2/12 models consist of a transmitter supplied by an external power supply, a plastic optical fiber, and a receiver – which has an external power supply as well.

Due to the U2/12 models insensitivity to strong electromagnetic fields above the specified transmission range the systems are fit for tests of electromagnetic compatibility in EMC-test chambers, TEM-cells, and striplines. The signal to be measured is filtered, sampled, digitized, and transmitted to the receiver via an optical transmitter system. At the receiver the digital data stream is converted into an analog signal again and can be measured with a high-impedance probe (e.g. an oscilloscope) at the signal output.
The U2/12-1M is availbel in two models:
1. U2/12 10MHz

mk-messtechnik U2-12 with input and output filtermk-messtechnik U2-12 with input and output filter
 
2. U2/12-1M 1MHz
mk-messtechnik U2-12-1M with input and output filtersmk-messtechnik U2-12-1M with input and output filters

 

 

Product
Voltage Range
min. eff. Resolution
Bandwidth
U2/12
+/- 15V
10 Bit
up to 10MHz
U2/12-M
+/- 15V
10 Bit
up to 1Mhz
Ux/14 (x=up to 16 Channels)
+/- 15V
10 Bit
up to 100Khz
 
mk-messtechnik U1/12-1M and U2/12-1M Analog Transmitter Users Manual
 
mk-messtechnik U1/12 and U2/12 Analog Transmitter Users Manual

 

Aaronia_AG_BicoLOG_5070_Biconical_Antenna_Data_Sheet mk-messtechnic Optical Fiber Component Cleaning Instruction
 
Request a Quote / Contact Us!

mk messtechnik

 
 

mk-messtechnik product Line

Reliant EMC Product Lines