Reliant EMC

mk-messtechnik dAV_Cr_SD Camera

dAV_Cr_SD Camera
mk messtechnik dAV_Cr_SD Camera
The dAV-C / dAV-R system system can be used for the optical and acoustical monitoring of devices under test during EMC measurements. The dAV-Cr-SD camera has an integrated microphone and can be set via an external set-up LCD and eight buttons on the case or via (optional) remote control at the receiver. One field of application is the monitoring of dash-boards or displays in vehicles ALCs (wall mount application) during EMC-tests. With the optical transmission and the shielded case, the camera is well equipped for EMI and EME tests.

In the version dAV-Cr-SD (dAV-C-SD with the option -r = remote) all settings and functions can be controlled via the receiver dAV-Rr (dAV-R with the option -r).

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet mk-messtechnik dAV_Cr_SD Camera Data Sheet

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet mk-messtechnik Overview of the dAV-C series Data Sheet

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet mk-messtechnik dAV-C-SD / dAV-R Manual

Pan/tilt unit PT-02/03
mk messtechnik Pan/tilt unit PT-02/03 mk messtechnik Pan/tilt unit PT-02/03
The camera dAV-Cr is mounted on the pan/tilt unit and can be controlled via the receiver dAV-Cr. The pan/tilt unit is supplied by the camera, further wiring is not necessary. The end stops can be set by buttons at the pan/tilt unit (e.g. if the camera would crash into something when moved).

The optional pan/tilt unit PT-02/03 can be connected to the camera by an integrated ¼“ tripod socket. Due to the small dimensions of camera and pan/tilt unit the system can be easily used within a vehicle, e.g. in order to monitor the dashboard.

With the help of the "Move" buttons, the pan/tilt unit can be moved to the desired position on site.

Pan/tilt unit PT-02 specifically designed for the mounting at the walls or the ceiling of an anechoic chamber (see picture on the left) Pan/tilt unit PT-03 for mobile use with reinforced brackets (see picture on the right)

Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet mk-messtechnik PT-02 Dimensions

Setup of a camera with pan/tilt unit
mk messtechnik dAV Camera with pan/tilt unit
The camera, which is mounted on the pan/tilt unit PT-03, is supplied by the Battery Pack. With the help of the external display ED-43, the camera can be comfortably set up.
Option -HiRF
mk messtechnik Option HiRF
With the option -HiRF, camera and pan/tilt unit are fit for very high field strengths and frequencies. The devices are equipped with additional screws and special cables for a high immunity: >> 600V/m up to 40GHz.
Accessories and options
Camera control software ccs for the remote control via software, with GUI (cominterface nexessary). In order to use this software, the camera receiver is connected to a PC via USB (built into all receivers) or ethernet (optional)
mk messtechnik Camera control software ccs for the remote control via software

Camera control software Shielded power supply for continuous supply of the camera

Remote control via software: with Ethernet-GUI (option -ethernet remote)

On Screen Display (OSD, display of DUT-data in video stream, cominterface and drivers for your HF software necessary)
OSD: Date and time are shown via batchfile

30x zoom for HD-Kameras (e.g. for large EMC chambers)

Wide angle and close-up lens

ST optical connectors

Power supply: External battery pack BP120-5f AND/OR Shielded external power supply SPS120 (see picture on the right) for wall mount setups (230V and 110 V available)
External remote control dAV-Rrc-Joy
mk messtechnik External remote control dAV-Rrc-Joy
External remote control for dAV-Rrc-Joy for all functions of the camera and the multichannel receiver dAV-Rmr². Up to 16 cameras can be addressed directly by pushbuttons, the connected pan/tilt units can be controlled with the joystick. Twist the joystick to zoom with the camera (tele/wide), push forward and backward for moving the pan/tilt in the y-axis, turn left or right for the x-axis. The dAV-Rrc-Joy is supplied by the remote connector of the receiver, no additional power supply is necessary.
Request a Quote / Contact Us!

mk messtechnik


mk-messtechnik product Line

Reliant EMC Product Lines