EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    EUROFINS YORK - CCC01KIT01- CABLE COUPLING CLAMP 01

    The Cable Coupling Clamp (CCC01) has been designed by Eurofins York Ltd. (formerly York EMC Services Ltd) for the purpose of measuring the EMC properties of cables. It can be used to make repeatable measurements aimed at assessing the coupling and shielding effectiveness properties of a wide range of cables. The design is based on the details of the possible launcher arrangement, described in IEC 96-1 Amendment 2 1993-06 section A.5.6 Line Injection Method (frequency domain). It is also used in IEC 62153-4-6: 2006 and mandated for the line injection method in EN 50289-1-6.

    FEATURES

    Fixed cable routes •  Repeatable layout of test and injection cables 
    Cable injection assemblies Injection cable runs are supplied preassembled and fitted with 

     

     

     

     

    ferrite common-mode chokes
    Supports a range of test cable sizes 2.5mm, 5mm and 10mm aperture supports provided as 

     

     

     

     

    standard. Cable dimensions up to 22mm x 13mm are possible

     

     

     

     

    with the user-machinable fitting accessories
    0.3m & 0.5m test lengths Base plate allows the injection assemblies to be mounted either 

     

     

     

     

    for a 0.3m cable length (EN 50289-1-6) or the extended 0.5m 

     

     

     

     

    length  (IEC 96-1) for increased coupling distance
    Configurable injection conductor Self-adhesive copper tape, easily trimmed to the correct width 

     

     

     

     

    required according to the circumference of the cable under test
    Easy connection to test system Injection cables are terminated in N-type connectors

    TECHNICAL DETAILS

    The CCC01 is designed to allow easy positioning of the test and injection feed cables in accordance with the layout described in IEC 96-1 Amendment 2 1993-06.

     

    The CCC01 is supplied with left- and right-hand injection assemblies. Each assembly comprises the conductive metal launchers used to align the cable-under-test with the injection feed cable, and comes supplied with the injection cable and its ferrite ring chokes already fitted. Each injection feed cable is fitted with N-type female connectors, for connection to the test system (for example a network analyzer or spectrum analyzer with tracking generator). Each assembly also features a supporting plastic cable guide for the cable-under-test, with space given for ferrite ring chokes to be fitted as per the test specification.

     

    The metal launchers are supplied with three pairs of conductive fittings with aperture sizes of 2.5mm, 5mm and 10mm diameter. Corresponding non-metallic fittings for the cable-under-test supporting guide clamps are also provided. With these fittings, a range of cable diameters can be accommodated.

     

    A non-metallic base plate is also supplied, which allows the launchers to be easily aligned to give a test-cable measurement length of either 0.3m (EN 50289-1-6) and 0.5m (IEC 96-1) as required.

    Please note: the cable under test (CUT) and parts associated with its construction and any ferrite rings to be fitted to it are not supplied.

     

    APPLICATIONS

    • Cable shielding effectiveness measurements as indicated by:
      • IEC 96-1 Amendment 2 1993-06
      • IEC 62153-4-6:2006
      • EN 50289-1-6
    •  Investigation of cable coupling phenomena

     

    SPECIFICATION

    Frequency Range 10 kHz to 1 GHz typical (usable to higher frequencies, depending on application)
    Output connector 50 Ω N-type socket
    Dimensions 220mm × 880mm (0.5m test setting)
    220mm × 740mm (0.3m test setting)
    Weight 3 kg (typical excluding cable-under-test and any associated ferrites)

     

    STANDARD ORDER KITS

    Part Number Description Parts Included
    CCC01KIT01 Standard CCC01 cable coupling clamp kit
    • CCC01 cable coupling clamp
    • 2.5mm, 5mm and 10mm diameter cable mounting fittings
    • Additional clip-on ferrite chokes
    • Self-adhesive copper tape
    • Hard case for injection assemblies

    ACCESORIES

    Accessory Part Nº Description
    Cable fittings CMF01 Kit of user-machinable blank fittings for custom cables

     

    Cable Coupling Clamp 01 - York EMC

     

    Cable Coupling Clamp 01 – Data Sheet

      How to use a CCC01 to measure cable shielding effectiveness