EnglishPortugueseSpanish
Schlöder Product List

Schlöder- ESD Simulators
• SESD 216 ESD Simulator 16,5 KV
• SESD 230 ESD Simulator 30 kV
• SESD 30000 EDS Simulator 30 kV
• SEDS 2910 ESD – Test System 30 KV
Schlöder- EMC Generators / Measurement System
• CDG 7000 Conducted Disturbances Test System
• CWG 1500 Surge / Hybrid Generators
• CWG 2500 Surge / Combination Wave Generators
• MGA 1033 Magnetic Field Generator And Analizer
• CAL 1250 Magnetic Field Calibrator
• PG 01-2000 Pulse Generator
• PGA 1240 Immunity DC – 300 kHz
• PGA 1240-5A & PGA 1240-16A Power DC Generators
• PGA – 1330 Immunity Generator
Schlöder- Burst Generators
• SFT 1400 Burst Generator 125 KHZ
• SFT 1420 Burst Generator 2 MHZ
• SFT 2400 EFT/Burst Generator 2 MHZ
• SFT 2420 EFT/Burst Generator 2 MHZ
• VIS 1700 Voltage Interruption Simulator
Schlöder- CDN – Coupling Decoupling Networks
Schlöder- Coupling Networks For Burst & Surge
-CN 1240-32 And CN 1240-125 Coupling Switchable Networks
-Mains Operation 3-Phase
• CWG 520
• CWG 523 / CWG 523-550
• CWG 524 CWG 524-550
• CWG 524-B / CWG 524-B-550
Interconnection Lines / Surge test only
• CWG 1525
• CWG 1526
• CWG 1528
Schlöder Current Monitoring Probes
• CDG CMP-45 Current Monitoring Probe
• CDG CMP-46 Current Monitoring Probe
• CDG A CMP-46 Calibration Set for the CDG CMP-46 Current Monitoring Probe
Schlöder- Accessories
-Burst Generator Accessories
• CWG 520 – 3-phase coupling network, 4 x 16 A – Burst and Surge
• CWG 523, CWG 523-550, CWG 524 CWG 524–550 – 3-phase Coupling Network, 4 x 32 / 60 A – Burst and Surge
• CWG 524-B – 3-phase Coupling Network, 4 x 60 A – Burst only
• EMV-SOFT – Remote control software for SFT, CWG, VIS
• SFT 415 – Capacitive Coupling Clamp (CCC)
• SFT 415-1 – Capacitive Coupling Clamp with protection cover
• SFT 415-CS – Calibration Set for verification the CCC
• SFT 430 HV Cable for Burst Generator
• SFT 450-Set – Attenuator Set
• SFT 470 – Probe set for Burst generator to create short time magnetic fields
ESD Simulator Accessories
• SESD 271 – Vertical Coupling Plate
• SESD 272 – Earth Cable
• SESD 30 S 120 – ESD Remote Control Software
• SESD 30 T 1000 – Support Arm with Balancer
• SESD 3020 – SESD 3027 – Test Tip´s for ESD
• SESD 3036 – Hook for Balancer
• SESD 8800-4 – ESD Target 4GHz
Surge / Hybrid Generator Accessories
• CWG 520, CWG 520 / 550 – 3-Phase Coupling network
• CWG 523, CWG 523-550, CWG 524, CWG 524-550- Coupling networks for Burst and Surge testing
• CWG 550 – External 18 µF capacitor in a housing
• CWG 553 – External 0,5 µF capacitor + 40 Ohm resistor in housing
• CWG 554 – External 9 µF + 10 Ohm resistor in housing
• CWG 1525 – CDN for 2 unshielded, balanced signal lines, 1 A, with gas discharger arrester
• CWG 1526-4, CWG 1526-10 – CDN for 2 unshielded, unbalanced data – and signal lines, 4 A or 10 A
• CWG 1528 – CDN for 4 unshielded, unbalanced data – and signal lines, 6 A, with RS 232 interface
• EMV-SOFT – Control software for SFT, CWG and VIS generators
Immunity, 10 kHz – 230 MHz Accessories
• CDN xxx -Coupling/Decoupling
• CDG A 31xx – Calibration adapters for CDN’s
• CDN-EMCL-20 & CDN EMCL-35 – EM Clamps
• CDN ABCL-20 – Decoupling Clamp
• CDN EMCL-NW_10 – Matching Network
• BCI-P1 – Clamp Bulk Current Injection (BCI) with Calibration Set
• CDG CMP-45 – Current Monitoring Probe With Calibration Set
• CDG CMP-46 – Current Monitoring Probe
• CDG A CMP-46 – Calibration Set
• CDG 6050 – 6dB Attenuator, 20W
• CDG 6050-100W – 6dB Attenuator, 100
Immunity, DC – 150 KHZ Accessories
• CN xxx - Coupling Networks
• CN 1240 xx - Coupling networks, switchable
Magnetic Field Generator Accessories
• CMGA_HCST - Helmholtz Coils
• MGA_LS/RL - Loop Sensor
• MGA_Bx - Test adapter, EN 55103
Voltage Interruption Simulator Accessories
• VIS 740 Step Transformer
• EMV-SOFT - Control software for SFT, CWG and VIS generators
Schlöder- Helmholtz Coils
Schlöder- Signal Generator SG 0282
Schlöder- Isolation – Transformers With Double Shield Winding
Schlöder Power Frequency Magnetic Field Immunity Tests
• Schlöder MGA_BC-500 Field Coil acc. to EN 55103-2
• Schlöder MGA 1030 Magnetic Field System Data Sheet
• Schlöder MGA 1030 Magnetic Field Generator and Analyzer Additional Equipment Data Sheet
Products By Standars

Company Overview
Data Sheets
Product List

Request a Quote / Contact Us!

SCHLÖDER EMC TEST & MEASUREMENT

Schloeder, Schloder, Schlöder

ESD-Simulators (IEC 61000-4-2, TR 10605, EN 13763)

SESD 216 16,5 kV, IEC; battery operation
SESD 230 30 kV, IEC; battery operation
SESD 30000 30 kV, IEC + ISO, with self-test
SESD 30000 A SESD 30000 + battery operation
SESD 2910 30 kV ESD Test-System, for electro-explosive devices

 

Burst-Generators (IEC 61000-4-4)

SFT 1400 / SFT 2400 5 kV, 125 kHz
SFT 1420 / SFT 2420 4,8 kV, 2 MHz

 

 Surge-Generators (IEC 61000-4-5)

CWG 1500 / CWG 2500 4,4 kV; 2,2 kA

 

Voltage Interruption Simulator (IEC 61000-4-11 & 29)

VIS 1700 AC+ DC, 16A

 

 Generator for conducted immunity, induced by RF fields (IEC 61000-4-6)

CDG 6000 25 W or 75W, with optional directional coupler

 

 Power Generator DC – 300 kHz (IEC 61000-4-16)

PGA 1240 ±50V, ±5A or ±16A, continuous tests
PGA 1330 for short term tests up to 300V, 1800W up to 10s

 

Magnetic field Generator + Analyzer (IEC 55103-1/2, IEC 61000-4-8 &16, MIL-STD-461 etc)

MGA 1033 DC – 250 kHz, 50V, 16A

 

Pulse Generator (FNN “Guide for evaluating the reliability of electricity meters”)

PG 01 2000   Surge and Pulse 0,1/2000 μs, 4 – 10 kV

 

Accessories:

CDNs for Burst, Surge and induced HF, CNs, Coupling / Decoupling Clamps, Attenuators, Helmholtz coils, Radiating Loops, Loop Sensors, Software …

 Schlöder Company Information

2016

Accredited calibrations are now also offered in addition to the factory

2015

The burst generators and voltage dips/interrupts simulators get new firmware and advanced functions

2014

The EMC Generators are equipped with latest generation of processors

2013

World’s first automatic and effective solution for absorbing electrostatic charges from the test surface of the EUT. Possible with the generator SESD 30000 and available up to 30 kV for air discharge and contact discharge.

2004

First 30 kV ESD generator worldwide with a self-test function. This function is essential for automatic tests.

2003

Since January 2003, Timonta AG is a 100% subsidiary of Schurter AG – a Swiss company. Schlöder GmbH is now a distributor of Schurter AG.

1999

Relocation of the company in a bigger company building (own building) in Keltern-Weiler

1998

Distribution agreement with Timonta AG for sale EMC line filter and EMC chokes.

1994

Exclusive agreement with Kabelwerk Eupen AG, Belgium for the distribution of ferrite-coated cables and wires in Germany.

1992

Development and production of the first own EMC test generator – burst generator.
Later, the product range was expanded with ESD, Surge, Voltage interruption, Conducted immunity, Magnetic field generator / analyzer and other.

1988

Schlöder GmbH was founded as a distributor company for EMC test- and measurement systems and EMC components. Mr. Friedrich Schlöder as the founder and CEO of Schlöder GmbH is a specialist in the field of EMC (Electro-Magnetic-Compatibility).

Mr. Schlöder works for 35 years mainly with the issues of interference and has experiences with EMC immunity tests and EMC test generators.
For more than 20 years, Mr. Schlöder works in the national standards body UK 767.3 (basic standard IEC 61000-4-xx). This ensures a timely and prompt implementation of the normative requirements related to the Schlöder EMC test generators.