GTEM ITALIA PRODUCT LINE
GTEM-CCC-100 Capacitive Coupling Clamp
GTEM – Cell Home Page
• Specifications Matrix for all GTEM Models
• GTEM – 250 F Family – 250 A-F, A-F-V, 250 A-F-SAE, A-F-V-SAE
GTEM – 400 Family – 400 A, 400 K, 400 A-K
• GTEM – 450 Family – 450 A, 450 K, 450 K-A, 450 A-V, 450 K-V, 450 K-V-A
• GTEM – 550 F Family – 550 A-F, 550 K-F, 550 A-F-V, 500 K-F-V
• GTEM – 750 Family – 750 A, 750 K
• GTEM – 800 Family –800 A,800 K,800 A-F,800 K-F
• GTEM 1000 K
• GTEM 1100 Family – 1100 K, 1100 K-F
• GTEM 1250 K
• GTEM 1300 K
• GTEM 1500 K
• GTEM 1600 K
• GTEM 1750 K
• GTEM 1800 K
• GTEM 2000 K
• GTEM 2100 K
• GTEM 2500 K
• GTEM 2600 K
Accessories for GTEM Cells Matrix
TEM Cells
• TEM 200 Data Sheet
• TEM 500 Data Sheet
• TEM 1000 Data Sheet
• TEM 3000 Data Sheet
Open TEM Cells
• O-TEM 220 Data Sheet
• O-TEM 500 Data Sheet
• O-TEM 1000 Data Sheet
• O-TEM 3000 Data Sheet
Reverberation Chambers
REVERBERATION TENTS
Shielded Chambers
STRIPLINE FOR IMMUNITY TESTS Mod. EMC-STPL
Stirrer to reduce inhomogeneous (standing waves) in reverberation chamber
GTEM ITALIA Company Overview
GTEM Italia Data Sheet
GTEM Italia Product List
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
GTEM CELL 400 FROM GTEM ITALIA
GTEM 400 Family of GTEM Cells from GTEM Italia
For emission and immunity testing according to IEC/EN 61000-4-20
The GTEM cell is, in principle, a tapered coaxial line (offset septum plate), which is terminated by a hybrid combination of discrete resistors and RF absorber to achieve a 50 Ohm broadband match.
It is applied for the measure of Radiated emissions and radio frequency field-immunity test.
There are three models of the GTEM 400 to choose from:
|
GTEM 400 A |
Shipped Assembled. 65cm/25” Pyramidal Absorbers. Includes wheeled trolley |
|
GTEM 400 K |
Shipped as a Kit. Assembly Required! 65cm/25” Pyramidal Absorbers. Includes wheeled trolley |
|
GTEM 400 K Assembled |
Shipped as a Kit. Assembled on Site. 65cm/25” Pyramidal Absorbers. Includes wheeled trolley |
The GTEM 400, 450, 500 and 550 use the same metal case.
The difference is the absorbers and ferrites.
Main Technical Specifications / Max EUT Size
|
Frequency range |
For emissions: 9KHz – 3 GHz For immunity applications: 80MHz – 6GHz * DC-20GHz optional |
|
Septum Height [mm]: |
400 mm |
|
Max EUT Size (LxWxH)cm |
35x40x20cm |
|
Defined test Volume within 6dB |
13.5×13.5×13.5 cm. |
|
Typical VSWR |
1:1.2 (for immunity test range) |
|
Typical VSWR at critical frequency |
<1:1.6 (for immunity test range) |
|
Max Input power, W continuous/*pulsed |
1 kW/2.5 kW |
|
Input connector |
7/16“ or N UG-21 |
|
Nominal impedance |
50 Ohm |
Mechanical Dimensions
|
Outer LxWxH [cm]: |
238 x 122 x 83cm + 70cm Trolley |
|
Door WxH [cm]: |
Standard: 40 x 40cm * Optional: 40x60cm |
|
Window in the door |
* Optional: circular Diam.200mm. |
|
Weight Kg. Approximately |
Approx. 250kg |
Electrical Specifications
|
Mains connectors |
Fix/CEE |
|
Main switch |
magneto-thermal 16A mono phase |
|
Input socket plug |
16 AC IEC Type ( mono phase + ground) |
|
Output socket EUT tape |
16 AC SHUCO type (mono phase + ground) |
|
Additional EUT sockets |
* Optional |
|
Ground connection |
M6 bolt,(it is required to be always connected) |
|
EMI AC Line filter (mono phase + ground) |
16A 250V n.2 terminals +ground |
|
EMI AC/DC secondary filter |
10A 250V AC/DC N.2 terminals |
|
Channel for fiber optic leads |
3 couples (18GHz Cut-off frequency) |
|
RF feed-thru connector |
N.1 N-N female |
|
RF feed-thru SMA connectors |
N.2 SMA-SMA female |
|
Technical panel pre-drilled for options |
supplied |
Options
|
Midia filter unit |
*Optional: N.1 RJ45, N.1 DB9-RS232, N.2 USB-2, N.1 |
|
Video camera system |
* Optional |
|
Indoor lighting |
10W LED |
|
Manipulator X,Y,Z |
Motorized USB, Manual, Remote controlled |
GTEM Italia GTEM 400 Data Sheet
GTEM Italia GTEM 250 to GTEM 1000 Specifications Matrix Data Sheet