EnglishPortugueseSpanish

Request a Quote / Contact Us!

Manufacturer

Part Number or Numbers

HILO - TEST ACCESORIES

Accessories

In this category you will find the accessories of all our manufactured equipment.

 BCK 400 F BURST CALIBRATION KIT

 CAR Calibration Kit

 CAR ICC Bulk Current Injection Probe

 CCK – Capacitor Calibration Kit

 CCK20 Capacitor Calibration Kit

 EFTC-CK – Calibration kit for burst Coupling Clamps

 Emergency Stop Switch

 Foot Switch

 HI 100 Helmholtz Coil

 HI 200 Helmholtz Coil

 IMP8 Impedance matching network for Surge generators

 PA 503 Safety test cabinet

 PA 504 Safety Test Cabinet

 PA 505 Safety Test Cabinet

 PA 525 Safety Test Cabinet

 PU 12 A-B DUT Switchover

 SCK 105 – Surge Calibration Kit

 SCK 105 inBox- Surge Calibration Kit

 VPS 250-16 – Variable Power Source

 Warning lights

 

 

BCK 400 F BURST CALIBRATION KIT (Part Number 5302006) 

Hilo-Test BCK 400 F BURST CALIBRATION KIT

 

Summary:

• Burst Calibration Kit

• Input voltage: 5 kV

• Ratio, 200/400:1

• Bandwidth: 400 MHz

 

The Burst Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of burst generators, e.g. the EFTG 4510 or the burst generator sub-unit of the CE-TESTER. It essentially consists of a load resistor, a pulse voltage divider and a double shielded coaxial cable.

 

Related Standards:

IEC: IEC 61000-4-04

 

 HILO-TEST BCK 400 F Burst Calibration Kit Data Sheet

 

 

 

CAR Calibration Kit (Part Number 5207078) 

CAR Calibration Kit

 

Summary:

• Standard loads

• According ISO

 

In accordance with the pulse verification requirements given in Annex C of ISO 7637-2:2011 and Annex A of ISO 16750-2:2012, test pulses generated by automotive transient generators need to be verified both under no-load (open circuit verification) and loaded conditions with specified loads.

 

Related Standards: ISO: ISO 7637-2, ISO 16750-2

 

 HILO-TEST CAR Calibration Kit Data Sheet

 

 HILO-TEST CAR Calibration Kit User Manual

 

 

CAR ICC Bulk Current Injection Probe 

CAR ICC Bulk Current Injection Probe

 

Summary:

• Bulk Current Injection Probe

• Bandwidth: 0,1 – 1000 MHz

 

The CAR-ICC Bulk Current Injection Probe is used for BCI testing in accordance with automotive specifications as well as diagnostic bulk current testing up to 1 GHz.

 

CCK – Capacitor Calibration Kit (Part Number 5300088) 

Capacitor Calibration Kit (CCK)

 

Summary:

• Capacitor Calibration Kit

• Input voltage: 12kV

• 27nF, 45nF, 68nF, 113nF P

 

The Capacitor Calibration Kit (CCK) has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100.

 

 Capacitor Calibration Kit (CCK) Data Sheet

 

 

CCK20 Capacitor Calibration Kit (Part Number 5300088) 

CCK20 Capacitor Calibration Kit

 

Summary:

• Capacitor Calibration Kit

• Input voltage: 20kV

• 50nF, 50nF, 33nF, 23nF

 

The Capacitor Calibration Kit 20 (CCK20) has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100.

 

 Capacitor Calibration Kit 20 (CCK20) Data Sheet

 

EFTC-CK Calibration kit for Burst Coupling Clamps (Part Number 5201026) 

HILO-TEST Emergency stop Switch

Summary:

• Calibration kit for burst coupling clamps

• According ISO

 

The EFTC-CK is a calibration kit for burst/EFT coupling clamps as specified in IEC 6100-4-4:2012. It has been designed for calibration of coupling clamps like EFTC2012. The set consists of a transducer plate and a termination bracket (connecting adapter).

 

Related Standards:

IEC 61000-4-04

 

 HILO-TEST EFTC-CK Calibration kit for Burst Coupling Clamps Data Sheet

 

 

Emergency Stop Switch / IPG PG NA (Part Number 5204082) 

HILO-TEST Emergency stop Switch

 

Summary:

• Emergency stop switch

• for safety circuit

• latching

• with rotary release

 

Emergency stop switch for interrupting / close the internal safety circuits.

 

Foot Switch 

 

Summary:

• Foot switch

• ergonomic

• robust

• Big button Foot switch to trigger certain generator functions.

 

 

HI 100 Helmholtz Coil 

HI 100 Helmoltz Coil

 

Summary:

• Helmholtz Coil

• Power frequency- and pulsed magnetic fields

 

Air coil designed for Generation of: Power frequency magnetic fields according to IEC 61000-4-8 Test levels 3 / 10 / 30 A/m (up to 150 A/m with type HI 102) Pulsed magnetic fields according to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m (up to 2200 A/m with type HI 102) Wave shape 8/20μs

 

Related Standards:

IEC: IEC 61000-4-08, IEC 61000-4-09

 

 HILO-TEST HI 100 Helmholtz Coil Data Sheet

 

 

HI 200 Helmholtz Coil (Part Number 5201006) 

HI 100 Helmoltz Coil

Helmholtz Coil According to IEC 61000-4-8 and IEC 61000-4-9

 

You can position the Hi 200 coil in vertical (picture) or in horizontal position to your test object and fix it with lamps or brace supports.

 

Air coil designed for Generation of:

• Power frequency magnetic fields acc. to IEC 61000-4-8 Test levels continuous 3 / 10 / 30 / 100 / 300 A/m Test level 1000 A/m short, with special transformer

• Pulsed magnetic fields acc. to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m Wave shape 8/20μs

 

 

Related Standards:

IEC: IEC 61000-4-8 and IEC 61000-4-9

 

 HILO-TEST HI 200 Helmholtz Coil Data Sheet

 

 

 

IMP8 Impedance matching network for Surge Generators (Part Number 5201028) 

HILO-TEST-IMP8-Impedance-matching-network-for-Surge-Generators

The external impedance IMP8 is the impedance, required for the pulse specifications according to standard IEC 61000-4-5 Ed.3, for measuring the pulse output voltage of surge generators. Additional

 

Related Standards:

IEC:IEC 61000-4-05

 

 HILO-TEST IMP8 Impedance matching network for Surge Generators Data Sheet

 

 

PA 503 Safety test cabinet 

PA 503 Safety test cabinet

 

Summary:

• Safety test cabinet

• Test voltage: 6 kV / 12 kV

• Dimensions W*H*D: 470 * 280 * 490 mm³

 

The safety test cabinet PA 503 is designed for high-voltage testing of components and PCB’s etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.

 

 HILO-TEST PA 503 Safety Test Cabinet Data Sheet

 

PA 504 Safety test cabinet (Part Number 5300038) 

HILO TEST PA 504 Safety test cabinet

 

Summary:

• Safety test cabinet

• Test voltage: 6 kV / 12 kV

• Dimensions W*H*D: 555 * 480 * 600 mm³

 

The safety test cabinets PA 50* are designed for high-voltage testing of components and PCB’s etc. The transparent cabinets prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.

 

 HILO-TEST PA 504 Safety Test Cabinet Data Sheet

 

 

PA 505 Safety Test Cabinet 

PA 505 Safety test cabinet

 

Summary:

• Safety test cabinet

• Test voltage: 10 kV

• Dimensions W*H*D: 440*250*500 mm³

 

The safety test cabinet PA 505/ PA 525 is designed for high-voltage testing of components and PCB’s etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.

 

 HILO-TEST PA 505 Safety Test Cabinet Data Sheet

 

 

PA 525 Safety Test Cabinet 

PA 525 Safety test cabinet

Summary:

• Safety test cabinet

• Test voltage: 12 kV

• Dimensions W*H*D: 440*250*500 mm³

 

The safety test cabinet PA 505/ PA 525 is designed for high-voltage testing of components and PCB’s etc. The transparent cabinet prevents accidental contact with live parts of the test object, yet allows observation of the test object during testing.

 

 HILO-TEST PA 525 Safety Test Cabinet Data Sheet

 

 

PU 12 A-B DUT Switch Over 

HILO-TEST PU 12 A-B DUT Switchover

 

Summary:

• DUT switchover

• High voltage test of devices

 

For high-voltage testing of components, a DUT switchover is available for different pulse generators.

 

By using the PU 12 A-B DUT Switchover the testing time be significantly reduced and increased the throughput significantly. The specimens are contacted via test adapter that new line during the test can be fitted and replaced quickly. Direct testing of 8/10/12 or 15 individual specimens or the “Differential / common mode” testing the a / b wires of IT equipment can be realized will. The control of the PU 12 A-B DUT Switchover done from the test generator.

The specimens are covered during the test by a safety test.

Of the Following the test generator is carried coaxially on the back of the units. To this Thus achieved a high degree of personal safety for the operating personnel.

Block diagram, by way of example:

To monitor the test quantities can pulse voltage divider and / or Current viewing resistors are integrated into the PU 12 A-B DUT Switchover.

 

 HILO-TEST PU 12 A-B DUT Switchover Data Sheet

 

 

SCK 105 – Surge Calibration Kit (Part Number 5302005) 

Surge Calibration Kit 105 (SCK 105)

 

Summary:

• Surge Calibration Kit

• Input voltage: 12kV

• Ratio: 1000:1

• Bandwidth: 10MHz

 

The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable

 

 Surge Calibration Kit 105 (SCK 105) Data Sheet

 

SCK 105 inBox (Surge Calibration Kit 105) (Part Number 5302005)

Surge Calibration Kit 105 (SCK 105 inBox)

 

Summary:

• Surge Calibration Kit

• Input voltage: 12kV

• Ratio: 1000:1

• Bandwidth: 10MHz

 

The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable.

 

 Surge Calibration Kit SCK 105 inBox Data Sheet

 

 

 

 

VPS 250-16 (Variable Power Source 250-16) (Part Number 5201005) 

Variable Power Source 250-16 (VPS 250-16)

 

Summary:

• Variable Power Source

• Voltage: 0 – 250 V

• Current: 16 A

 

Motor-driven variable transformer, controlled by CE-TESTER, used for power supply variation according to IEC 61000-4-11.

 

Related Standards: IEC: IEC 61000-4-11

 

 HILO-TEST Variable Power Source 250-16 (VPS 250-16) Data Sheet

 

 

 

Warning lights (Part Number 5300008) 

HILO-TEST Warning lights

 

Summary:

 Warning lamps

 red/ green

 universally Placeable Warning / signal lamps for visualizing the generator state. Signal red: “Warning Hazard”, signal green: “all clear”.