HILO-TEST PRODUCT LINE
Hilo-Test Product Categories:
• AC DC Test Equipment
• Accessories
• Automotive EMC Test Systems
• Burst (EFTG) Simulators / Burst Calibration Kit
• Coupling Network (CDN)
• ESD Generators
• High Voltage Dividers
• Impulse Current Generators
• Miscellaneous Products
• Multifunction Generators
• Oscillatory wave generator systems
• Power Fail Generators
• Ring-wave Generators
• Shunts
• Software
• Surge (Hybrid) Generators
• Telecom Generators
Hilo-Test Products by Standards Categories
• Industry Standards
• Car Standards
• Telecommunications Standards
EMC Test Equipment
• Industry Standard
•• EFTG 4510 Accessories
•• CE Tester Accessories
• KFZ-Industry Standards
•• Car Tester Accessories
• Combination Wave Generators (CWG)
•• CE-Surge Accessories
•• PG 7-250 Accessories
•• PG 10-504 Accessories
•• PG 12-804 Accessories
• CCITT Test Equipment, Series K
• Component Test Generators
• Impulse Voltage Generators
•• High Voltage Pulse Generators
•• PG 10-200/PG 12-360 Accessories
•• High Current Pulse Generator
• High Voltage Test and Measurement Equipment
•• AC and DC
•• High Voltage Measurement Equipment
•• Calibration Equipment
Other Products
• Safety Test Cabinets
• Miscellaneous Products
• AC DC Test Equipment
• Accessories
• Automotive EMC Test Systems
• Burst (EFTG) Simulators / Burst Calibration Kit
• Coupling Network (CDN)
• ESD Generators
• High Voltage Dividers
• Impulse Current Generators
• Miscellaneous Products
• Multifunction Generators
• Oscillatory wave generator systems
• Power Fail Generators
• Ring-wave Generators
• Shunts
• Software
• Surge (Hybrid) Generators
• Telecom Generators
Hilo-Test Products by Standards Categories
• Industry Standards
• Car Standards
• Telecommunications Standards
EMC Test Equipment
• Industry Standard
•• EFTG 4510 Accessories
•• CE Tester Accessories
• KFZ-Industry Standards
•• Car Tester Accessories
• Combination Wave Generators (CWG)
•• CE-Surge Accessories
•• PG 7-250 Accessories
•• PG 10-504 Accessories
•• PG 12-804 Accessories
• CCITT Test Equipment, Series K
• Component Test Generators
• Impulse Voltage Generators
•• High Voltage Pulse Generators
•• PG 10-200/PG 12-360 Accessories
•• High Current Pulse Generator
• High Voltage Test and Measurement Equipment
•• AC and DC
•• High Voltage Measurement Equipment
•• Calibration Equipment
Other Products
• Safety Test Cabinets
• Miscellaneous Products
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
HILO - EMC TEST EQUIPMENT
HILO-TEST EMC TEST EQUIPMENT BY INDUSTRY STANDARD
INDUSTRY STANDARDS
Data Sheet
|
Description:
|
SESD 216 | ELECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 10 kV, air discharge up to 16.5 kV > as specified in IEC 61000-4-2 |
SESD 230 | LECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 30 kV, air discharge up to 30 kV |
ESD 30000 | ELECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 30 kV, air discharge up to 30 kV as specified in IEC 61000-4-2 and ISO TR 10605 |
EFTG 4510 | ELECTRICAL FAST TRANSIENT GENERATOR simulates transient disturbances of the mains power supply caused by contact bouncing, waveform 5/50 ns, 0.2 – 5 kV, 1KHz-1MHz burst frequency, specified in IEC 61000-4-4 |
CE-TESTER |
Compact EMC test unit,
|
IPG 612T | RING-WAVE GENERATOR simulates high-voltage transients of the mains power supply caused by switching in the major power system waveform 0.5µs/100 kHz, 6 kV, specified in IEC 61000-4-12, EN 61000-4-12, IEC 1008-1 |
IPG 2554 | OSCILLATORY WAVE GENERATOR simulates high-voltage transients of the mains power supply caused by switching in gas isolated substations of the major power system, specified in IEC 61000-4-12, EN 61000-4-18 slow damped oscillatory wave 100 kHz, 0 – 3 kV, rep. rate 40Hz slow damped oscillatory wave 1.0 MHz, 0 – 3 kV, rep. rate 400 Hz fast damped oscillatory wave 3/10/30 MHz, 0 – 4 kV, rep. rate 5 kHz |
PFS 2516 | POWER FAIL SIMULATOR including motor driven variac 0 – 250 V / 16 A simulates transient interruptions and variation of the power supply voltage specified in IEC 61000-4-11 |
EFTG 4510 Accessories
Data Sheet
|
Description |
Accessories for EFTG 4510 | |
EFTC 2012 | Capacitive Coupling Clamp for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4 |
BCK 400F | Burst Calibration Kit including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators |
Coupling-/Decoupling Networks for EFTG 4510 | |
CDN 4416B | Coupling-/Decoupling Network Coupling of BURST – pulses to power supply lines 3 * 400 V, 25 A |
CE Tester Accessories
Data Sheet
|
Description
|
Accessories for CE-TESTER | |
VPS 250-16 | Variable Power Source Motor driven variac, control by CE-TESTER This sub-unit is necessary for generation of voltage variation according to IEC 61000-4-11 |
HI 100 | Helmholtz Coil Air coil for generation of magnetic fields according to IEC 1000-4-8 / -9 |
EFTC 2012 | Capacitive Coupling Clamp for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4 |
SCK 105 | Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators |
BCK 400F | Burst Calibration Kit including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators |
Coupling-/Decoupling for CE-TESTER | |
CDN 4416 CDN 4432 CDN 4463 |
pulses to power supply lines 3 * 400 V, 16 A, 32 A or 63 A, surge: max. test voltage 5 kV, 1.2/50µs burst: max. Test voltage 5 kV, 5/50ns |
CDN 2402 | pulses to data lines, 4 * 48 V, 2 A, max. test voltage: 2 kV, 1.2/50µs |
CDN 2410 | pulses to data lines, 4 * 240 V, 10 A, max. test voltage: 2 kV, 1.2/50µs |
CDN 2802 | pulses to data lines, 8 * 48 V, 10 A, max. test voltage: 2 kV, 1.2/50µs |
Data Sheet
|
Description
|
CAR-TEST-SYSTEM 14 | EMC Test System, designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. The following tests are implemented: – Immunity to Surge, Pulse # 1, # 2, # 3 – Direct current supply voltage – Over Voltage, Jump Start – Slow decrease and increase of supply voltage – Discontinuities in supply voltage – Damp Load Test A, Test B Load switch: 50/100/200A Various power amplifier possible according to DIN/ISO 7637-1/2 and ISO 16750-2 |
CAR-TE14 | Transient Emission Test – with load switch, electronic / mechanical – with load resistors according to ISO 7637-1/2 |
CAR-SS-A1250 | Superimposed sinus ac Voltage Generator 0 – 30kHz; 30A according to ISO 7637-1/2 |
Load Dump Generator PG 2804 |
Compact EMC test unit, designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. Available impulse waveforms: 5 / Test A+B, according to ISO 16750-2 |
Car Tester Accessories
Data Sheet
|
Description
|
CDN 2012 | Capacitive Coupling Clamp interference of burst pulses to screened lines according to IS= 7637-3 |
SESD 30000 | ELECTRO STATIC DISCHARGE GENERATOR Contact discharge and air discharge up to 30 kV according to IEC 61000-4-2 and ISO/TR 10605 |
Data Sheet
|
Description
|
CWG Series: | COMBINATION WAVE GENERATORS Pulse voltage 1.2/50µs, Pulse current 8/20µs specified in IEC 61000-4-5, EN 61000-4-5, IEEE587, VDE0847-4-5 |
IPG 105 | COMBINATION WAVE GENERATOR, IPG 105 Pulse voltage 1.2/50µs, – 1.0 kV, Pulse current 8/20µs, – 500 A |
PG 2.5-32 | COMBINATION WAVE GENERATOR, PG2.5-32 Pulse voltage 1.2/50µs, – 2,5 kV, Pulse current 8/20µs, -1.25 kA |
CE-SURGE | COMBINATION WAVE GENERATOR, CE-SURGE Pulse voltage 1.2/50µs, – 5 kV, Pulse current 8/20µs, – 2.5 kA |
PG 7-250 | COMBINATION WAVE GENERATOR, PG 6-204 Pulse voltage 1.2/50µs, – 6 kV, Pulse current 8/20µs, – 3.0 kA |
PG 10-504 | COMBINATION WAVE GENERATOR, PG 10-504 Pulse voltage 1.2/50µs, – 10 kV, Pulse current 8/20µs, – 5.0 kA |
PG 12-804 | COMBINATION WAVE GENERATOR, PG 12-804 Pulse voltage 1.2/50µs, – 12 kV, Pulse current 8/20µs, – 6.0 kA |
PG 24-2500 | COMBINATION WAVE GENERATOR, PG 24-2500 Pulse voltage 1.2/50µs, – 24 kV, Pulse current 8/20µs, – 12 kA |
CE-SURGE Accessories
Data Sheet
|
Description
|
Accessories for CE-SURGE
|
|
HI 100 | Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9 |
SCK 105 | Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators |
Coupling-/Decoupling Network for CE-SURGE | |
CDN 4416 CDN 4432 CDN 4463 |
three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A max. test voltage: 5 kV, 1.2/50µs |
CDN 2402 | for data lines, 4 * 48 V, 2 A, max. test voltage: 2.5 kV, 1.2/50µs |
CDN 2410 | for data lines, 4 * 240 V, 10 A, max. test voltage: 2.5 kV, 1.2/50µs |
CDN 2802 | for data lines, 8 * 48 V, 10 A, max. test voltage: 5 kV, 1.2/50µs |
PG 7-250 Accessories
Data Sheet
|
Description
|
Accessories for PG 7-250 | |
HI 100 | Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9 |
SCK 105 | Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators |
Coupling-/Decoupling Networks for PG 7-250 | |
CDN 6416 |
Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns |
CDN 6432 | Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns |
CDN 6463 | Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns |
CDN 2402 | Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A |
CDN 2410 | Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A |
PG 10-504 Accessories
Data Sheet
|
Description
|
Accessories for PG 10-504 | |
HI 100 | Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9 |
SCK 105 | Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators |
Coupling-/Decoupling Networks for PG 10-504 | |
CDN 10416 | Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns |
CDN 10432 | Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns |
CDN 10463 | Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns |
CDN 2402 | Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A bzw. 4 * 240 V, 10 A |
CDN 2410 | Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A |
PG 12-804 Accessories
Data Sheet
|
Description
|
Accessories for PG 12-804 | |
HI 100 | Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9 |
SCK 105 | Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators |
Coupling-/Decoupling Networks for PG 12-804 | |
CDN 12216 |
Coupling-/Decoupling Network Coupling of BURST or SURGE – pulses to power supply lines 2 * 240 V, 16 A Surge: max. test voltage: 12 kV, 1.2/50µs coupling mode: «line to line», «line to ground» and «common mode» Burst: max. test voltage: 4.5 kV, 5/50ns according to IEC 61000-4-4 / -5, VDE 0847-4-4 / -5 |