HILO-TEST PRODUCT LINE
• AC DC Test Equipment
• Accessories
• Automotive EMC Test Systems
• Burst (EFTG) Simulators / Burst Calibration Kit
• Coupling Network (CDN)
• ESD Generators
• High Voltage Dividers
• Impulse Current Generators
• Miscellaneous Products
• Multifunction Generators
• Oscillatory wave generator systems
• Power Fail Generators
• Ring-wave Generators
• Shunts
• Software
• Surge (Hybrid) Generators
• Telecom Generators
Hilo-Test Products by Standards Categories
• Industry Standards
• Car Standards
• Telecommunications Standards
EMC Test Equipment
• Industry Standard
•• EFTG 4510 Accessories
•• CE Tester Accessories
• KFZ-Industry Standards
•• Car Tester Accessories
• Combination Wave Generators (CWG)
•• CE-Surge Accessories
•• PG 7-250 Accessories
•• PG 10-504 Accessories
•• PG 12-804 Accessories
• CCITT Test Equipment, Series K
• Component Test Generators
• Impulse Voltage Generators
•• High Voltage Pulse Generators
•• PG 10-200/PG 12-360 Accessories
•• High Current Pulse Generator
• High Voltage Test and Measurement Equipment
•• AC and DC
•• High Voltage Measurement Equipment
•• Calibration Equipment
Other Products
• Safety Test Cabinets
• Miscellaneous Products
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
HILO - Impulse Current Generators
Impulse Current Generators
• EMC 2015 impulse generator system
• SPG 1.2-25000 / SPG 1.2-25K Sine Wave Pulse Generator
• PG 5-4500 High Current Pulse Generator
• PG 6-200 high current pulse generators
• PG 6-400 high current pulse generators
• PG 6-2402 high-current pulse generator
• PG 10-1000 Impulse Current Generator
• PG 10-2500 Impulse Current Generator
• PG 12-3600 Surge Current Generator
• PG 10-4000 Surge Current Generators
• PG 10-6000 Surge Current Generator
• PG 20-7000 Surge Current Generator
• PG 10-8000 Surge Current Generators
• PG 10-7000 Surge Current Generator
• PG 10-8000 Impulse Current Generator
• PG 10-10000 / PG 10-10K Surge Test Generator
• PG 10-12500 Impulse Current Test Generator
• PG 10-12500 Surge Current Generator
• PG 10-25000 / PG 10-25K Surge Current Generator
• PG 10-25002 Surge Current Generators
• PG 20-10000 / PG 20-10K Surge Current Generator
• PG 20-14000 / PG 20-14K Surge Current Generator
Impulse Current Generators
Hilo-Test manufactures power generators for surge current material and safety tests, in particular for the examination of diverting elements such as gas discharge tubes, varistors, SPDs, and components in which such protective elements are installed, according to according to the IEC / EN 61643-11.
EMC 2015 Impulse Generator System (Part Number 5205012)
Summary:
• EMI Simulator
• Plug-in system
• Different wave forms
The impulse generator system EMC 2015 has been designed for dielectric testing of electric components, over-voltage protectors and electronic circuits according IEC, VDE etc. The basic version generates impulse currents with waveform 8/20 μs and a peak value up to 25 kA. In addition, various other plug-ins are also available.
Related Standards:
IEC: IEC 60060-2, IEC 62475-2
EMC 2015 Impulse Generator System Data Sheet
PG 6-200 High Current Pulse Generators (Part Number 5205015)
Summary:
• Waveform: 8/20 μs
• Surge current: 5 kA
• Charging voltage: 6 kV
• Energy: 200 J
The high current pulse generators PG 6-400 and PG 6-200 are designed for surge testing of electrical components, over-voltage protectors and electronic circuits according to IEC, VDE etc.
They generate standard impulse currents with waveform 8/20 μs. Short circuit output current amplitude is selectable from 0.2 up to 10 kA by adjustment of the charging voltage of the internal energy storage capacitor.
Related Standards:
IEC: IEC 60060-2, IEC 62475-2
PG 6-200 High Current Pulse Generators Data Sheet
PG 6-400 High Current Pulse Generators (Part Number 5205016)
Summary:
• Waveform: 8/20 μs
• Surge current: 10 kA
• Charging voltage: 6 kV
• Energy: 400 J
The high current pulse generators PG 6-400 and PG 6-200 are designed for surge testing of electrical components, over-voltage protectors and electronic circuits according to IEC, VDE etc.
They generate standard impulse currents with waveform 8/20 μs. Short circuit output current amplitude is selectable from 0.2 up to 10 kA by adjustment of the charging voltage of the internal energy storage capacitor.
Related Standards:
IEC: IEC 60060-2, IEC 62475-2
PG 6-400 High Current Pulse Generators Data Sheet
PG 10-1000 High-Voltage Impulse Generator (Part Number 5206016)
Summary:
• Switching Surge
• Impulse voltage: 10 kV
• Waveform: 1.2/50 μs
• Waveform: 10/700 μs
• Energy: 50 J / 1000 J
The high-voltage impulse generator PG 10-1000 generates standard impulse voltages with waveforms 1.2/50 μs and 10/700 μs. Output voltage is adjustable between 0.5 kV and 10 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected. The generator is designed for dielectric testing of components and systems as well as testing of the electromagnetic compatibility of electronic systems and devices acc. to CCITT K17/K20/K22, ITU-T/K44, IEC 61000-4-5, VDE 0847.
Related Standards:
IEC:IEC 61000-4-05
ITU-T:K17, K20, K22, K44
PG 10-1000 High-Voltage Impulse Generator Data Sheet
PG 6-2402 High-Current Pulse Generator
Summary:
• Waveform: 8/20μs
• Surge current: 2 * 25 kA
• Charging voltage: 6 kV
• Energy: 2400 J
• Surge current testing of surge protection devices
The high-current pulse generator PG 6-2402 is designed for surge current testing of electrical components, over-voltage protectors and electronic circuits according to IEC, VDE etc. It generates standard impulse currents with waveform 8/20μs. Pulse current output amplitude can be set to 2 – 50 kA.
Related Standards:
IEC: IEC 62475-2
PG 6-2402 high-current pulse generator Data Sheet
PG 10-2500 Impulse Current Generator (Part Number 5205047)
Summary:
• Waveform: 10/350μs
• Surge current: 5.0 kA
• Charging voltage: 10 kV
• Energy: 12500 J
The surge current generators PG **-**** generate impulse currents with wave form 10/50 μs – 10/1000 μs acc. to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG PG 10-2500 Impulse Current Generator Data Sheet
PG 10-8000 Impulse Current Generator
Summary:
• Waveform: 10/1000• ¼s
• Surge current: 1.0 kA
• Charging voltage: 10 kV
• Energy: 8000 J
The surge current generators PG **-**** generate impulse currents with wave form 10/50 μs – 10/1000 μs acc. to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG PG 10-8000 Impulse Current Generator Data Sheet
PG 10-12500 Impulse Current Test Generator
Summary:
• Waveform: 8/20• ¼s
• Surge current: 2 * 50 kA
• Charging voltage: 10 kV
• Energy: 10000J
• pulse current test of surge protection devices
The Surge Test Generator PG 10-10000 delivers surge current pulses with the waveform 8/20• ¼s, according to IEC 60. It was designed for testing surge protection devices. Moreover the generator can be used for testing two-gap over-voltage protectors. It delivers surge current pulses synchronous at two impulse current outputs, peak value adjustable 0.5 – 50 kA for each output. Positive or negative polarity of output current can be selected.
Related Standards:
IEC: IEC 62475-2
PG 10-12500 Surge Test Generator Data Sheet
PG 10-10000 / PG 10-10K Surge Test Generator (Part Number 5205029)
Summary:
• Waveform: 8/20• ¼s
• Surge current: 2 * 50 kA
• Charging voltage: 10 kV
• Energy: 10000J
• pulse current test of surge protection devices
The Surge Test Generator PG 10-10000 delivers surge current pulses with the waveform 8/20• ¼s, according to IEC 60. It was designed for testing surge protection devices. Moreover the generator can be used for testing two-gap over-voltage protectors. It delivers surge current pulses synchronous at two impulse current outputs, peak value adjustable 0.5 – 50 kA for each output. Positive or negative polarity of output current can be selected.
Related Standards:
IEC: IEC 62475-2
PG 10-10000 Surge Test Generator Data Sheet
PG 12-3600 Surge Current Generator
Summary:
• Waveform: 8/20μs
• Surge current: 40 kA
• Charging voltage: 12 kV
• Energy: 3600 J
The surge current generators generate standard impulse currents with waveform 8/20 μs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generators are designed for testing electrical components, over voltage protectors and electronic circuits. They possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 12-3600 Surge Current Generator Data Sheet
PG 20-7000 (PG 20-7K) Surge Current Generator (Part Number 5205053)
Summary:
• Waveform: 8/20μs
• Surge current: 50 kA
• Charging voltage: 20 kV
• Energy: 7000 J
The surge current generators PG20-7000 generates standard impulse currents with waveform 8/20 μs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 50 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 61643-11, IEC 62475-2
PG 20-7000 Surge Current Generator Data Sheet
PG 20-10000 / PG 20-10K Surge Current Generator (Part Number 5205051)
Summary:
• Waveform: 8/20μs
• Surge current: 70 kA
• Charging voltage: 20 kV
• Energy: 10000 J
The surge current generators PG20-10000 generates standard impulse currents with waveform 8/20 μs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 70 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 61643-11, IEC 62475-2
PG 20-10000 Surge Current Generator Data Sheet
PG 20-14000 Surge Current Generator (Part Number 5205032)
Summary:
• Waveform: 8/20μs
• Surge current: 100 kA
• Charging voltage: 20 kV
• Energy: 14000 J
The surge current generators PG20-14000 generate standard impulse currents with waveform 8/20 μs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 100 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 61643-11, IEC 62475-2
PG 20-14000 Surge Current Generator Data Sheet
PG 10-2500 Surge Current Generators (Part Number 5205035)
Summary:
• Waveform: 10/700 μs
• Surge current: 500A
• Charging voltage: 10kV
• Energy: 2500 J
The surge current generator PG 10-2500 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-2500 Surge Current Generators Data Sheet
PG 10-4000 Surge Current Generators
Summary:
• Waveform: 10/1000μs
• Surge current: 500A
• Charging voltage: 10kV
• Energy: 4000 J
The surge current generators PG 10-4000 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-4000 Surge Current Generators Data Sheet
PG 10-8000 Surge Current Generators
Summary:
• Waveform: 10/1000μs
• Surge current: 1.0 kA
• Charging voltage: 10kV
• Energy: 8000 J
The surge current generators PG 10-8000 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-8000 Surge Current Generators Data Sheet
PG 10-7000 Surge Current Generator
Summary:
• Waveform: 10/350 µs
• Surge current: 2.5 kA
• Charging voltage: 10 kV
• Energy: 7000 J
• For surge current testing of Lightning protection components
The surge current generator type PG10-7k generate lightning impulse currents with waveform 10/350) s according to IEC, VDE etc .. The peak value of the surge current can be adjusted continuously by varying the charging voltage to the maximum value. The generators are used for impact testing of electrical components, surge arresters and electronic circuits.
Related Standards:
IEC: IEC 62475-2
PG 10-7000 Surge Current Generator Data Sheet
PG 10-12500 Surge Current Generator
Summary:
• Waveform: 10/350 µs
• Surge current: 5.0 kA
• Charging voltage: 10 kV
• Energy: 12500 J
The surge current generators PG 10-12500 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-12500 Surge Current Generator Data Sheet
PG 10-25000 / PG 10-25K Surge Current Generator (Part Number 5205035)
Summary:
• Waveform: 10/350 µs
• Surge current: 10 kA
• Charging voltage: 10 kV
• Energy: 25000 J
The surge current generators PG 10-25000 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-25000 Surge Current Generator Data Sheet
PG 10-6000 Surge Current Generator
Summary:
• Waveform: 10/50μs
• Surge current: 10 kA
• Charging voltage: 10kV
• Energy: 6000 J
The surge current generators PG 10-6000 generate impulse currents with wave form 10/50 μs – 10/1000 μs according to IEC, VDE etc.. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generator is designed for testing electrical components, over-voltage protectors and electronic circuits. It possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
Related Standards:
IEC: IEC 62475-2
PG 10-6000 Surge Current Generator Data Sheet
PG 5-4500 High Current Pulse Generator
Summary:
• Waveform: 1.5/5000μs
• Surge current: 2 * 125A
• Charging voltage: 5kV
• Energy: 4500 J
The high current pulse generator PG 5-4500 has been designed for pulse-current testing of electric components, over voltage protectors and electronic circuits according IEC, VDE etc.
Related Standards:
IEC: IEC 62475-2
PG 5-4500 High Current Pulse Generator Data Sheet
SPG 1.2-25000 / SPG 1.2-25K Sine Wave Pulse Generator (Part Number 5205045)
Summary:
• Waveform: 50Hz semi-sinus waves
• 2 Current ranges:
• 0.5 – 7.5 kA
• 25 – 375 A
• Charging voltage: 1.2kV
• Energy: 25000 J
The Sine Wave Pulse Generator is used for impulse current tests of the current conductors of watt-hour meters. The generator produces sinusoidal impulse currents and the wave shape is a 50 Hz sinusoidal half wave and the amplitude is adjustable via the charging voltage of the energy storage capacitor from 0.5 kA to 7.5 kA.
Related Standards:
IEC: IEC 62475-2, IEC/EN 50470-21