EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    HILO – Damped Oscillatory Magnetic Field Immunity

    Damped Oscillatory Magnetic Field Immunity

    • IPG 2553 Oscillatory Wave Generator

    • HI 100 Helmholtz Coil

    • HI 200 Helmholtz Coil

    • HILO-TEST Remote Control Software 

    • HILO-TEST-Control

    • Emergency-Stop

     

    Oscillatory wave generator systems have been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory magnetic field according to IEC 61000-4-10 requirements. These systems generate a decaying cosine current waveform with ringing frequency of 100 kHz or 1.0 MHz.

     

    HILO-TEST Oscillatory Wave Generator IPG 2553

    Reliant EMC offers the HILO-TEST Oscillatory Wave Generator IPG 2553. For testing to IEC 61000-4-10 the IPG 2553 is connected to a specialy designed Helmholtz Coil (the HI 100) which generates magnetic field with 10 – 100 A/m. The amplitude of the magnetic field strength can be adjusted by presetting the charging voltage of the pulse generator, 0.25 kV up to 2.5 kV. The polarity of the first amplitude alternates from wave to wave.

     

     HILO-TEST IPG 2553 Oscillatory Wave Generator Data Sheet
    HILO-TEST Helmholtz Coil HI 100
    According to standard IEC: IEC 61000-4-08, IEC 61000-4-09
    HILO-TEST Oscillatory Wave Generator IPG 2553
    HI 200 Helmholtz Coil 
    HI 100 Helmoltz Coil

    Helmholtz Coil According to IEC 61000-4-8 and IEC 61000-4-9

     

    You can position the Hi 200 coil in vertical (picture) or in horizontal position to your test object and fix it with lamps or brace supports.

     

    Air coil designed for Generation of:

    • Power frequency magnetic fields acc. to IEC 61000-4-8 Test levels continuous 3 / 10 / 30 / 100 / 300 A/m Test level 1000 A/m short, with special transformer

    • Pulsed magnetic fields acc. to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m Wave shape 8/20μs

     

     

    Related Standards:

    IEC: IEC 61000-4-8 and IEC 61000-4-9

    Accessories:

    Software – HILO-TEST Remote Control is a software for personal computers. It is used to control HILO-Test generators from your computer. The software allows users to create tests and reports, which can be changed with your default text editor. In addition, it allows an oscilloscope to monitor all test pulse and to store the captured image of the waveforms on the computer. The communication with the generator is implemented with a LAN connection. The generator is connected via an optical interface. Thus, the PC is completely disconnected from the generator.

     

    Features
    • Windows 7 and Windows 8 (32 / 64Bit) compatibility / Linux /Android 
    • LAN interface (fully isolated by connected via an optical interface) • Standard library (61000-4-4/5/11) 
    • Real Time pulses monitoring • Intuitive operation 
    • Up-to-date design and navigation 
    • Test reports can be modified with your standard text-editing program

     

    HILO-TEST Remote Control Software

    HILO-TEST Remote Control Software comes standard with a library of parameters pre-defined for:
    • IEC 61000-4-4 
    • IEC 61000-4-5 
    • IEC 61000-4-11
    • and more!

     

    All parameter are editable to make a user defined test

    Real time pulse monitoring and Impulse Recording Function (IRF)
    A main feature of the software is the real time pulse monitoring. While executing a test procedure, test parameters and measured values like peak voltage and peak current are recorded and displayed on the screen. If HILO IFR is activated, a separate window shows the recorded pulse.

    Control all HILO-TEST generators via WIFI from your Android smartphone or tablet. Simply set the main parameters of the generator and start the test procedure. Especially usefull on a production line or to control the generator without wired connection to the control center.

    Hardware included 
    • fiber optic cable cable 5m 
    • Light Guide LAN Ethernet converters 
    • Power supply for converter

     

     

    Control – HILO-TEST Control allows a user to remotely control a generator with instruction sets through a LAN connection. 
    The generator is connected via an optical interface. 
    Thus, the PC is completely disconnected from the generator.

     

    HILO-TEST Control

    Key Pointes:
    • Generator control commands
    • Ethernet interface
    • Optical fiber
    • Galvanically isolated

    According to standard IEC: IEC 17025

     

    Emergency Stop – The Emergency stop switch is use to  interrupt / close the internal safety circuits.

     

    HILO-TEST Emergency Stop

    Key Points:
    • Emergency stop switch
    • for safety circuit
    • latching
    • with rotary release