EnglishPortugueseSpanish

Request a Quote / Contact Us!

Manufacturer

Part Number or Numbers

HILO - SHUNTS

Shunts

 WSM Type AC/DC Current-Viewing Resistors

 ISM Current-Viewing-Resistors

 SCK 105 Surge Calibration Kit

 Shunts

 

HILO-TEST WSM alternating current measuring resistors have significantly better high-frequency transmission characteristics when compared with traditional direct current shunt resistors with coaxial voltage tap. This is do to the very complicated structural design of the active part of the WSM products.

ISM pulse current measuring resistors allow the metrological recording of the time curve of fast current changes with large amplitude in the nanosecond range. The ISM products are designed to measure pulse current with broadband oscilloscopes.

WSM Type AC/DC Current-Viewing Resistors 

WSM type AC/DC current-Viewing resistors

 

Summary:

• Current-viewing resistors

WSM type AC/DC current-Viewing resistors are designed for precise measurement of pulsed AC and DC currents, for instance in industrial drives, pulsed welders and plasma physics apparatuses. Moreover they are employed in short-circuit test facilities, measurement of start currents of fuel engines etc.

 

ISM Current-Viewing-Resistors 

ISM Current-viewing-resistors

 

Summary:

• Current-viewing-resistors

Current-viewing-resistors Series ISM allow precise measurement of peak value and waveform of fast rise time current pulses. They excel by high bandwidth, low rise time and high accuracy of resistance value. Below their upper frequency limit (-3 dB), the current-viewing-resistors ISM behave like pure DC resistors with frequency independent resistance value. Because of their double coaxial design current-viewing-resistors ISM are not susceptible to noise and electromagnetic interference.

 

SCK 105 Surge Calibration Kit (Part Number 5302005) 

 

Summary:

• Surge Calibration Kit

• Input voltage: 12kV

• Ratio: 1000:1

• Bandwidth: 10MHz

 

The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double shielded coaxial cable.

  

Shunts 

Data Sheet

 

Description

 

ISM*** Current measuring resistors for high pulse currents
Dimensions
WSM*** Current measuring resistors for high ac currents
Dimensions