EnglishPortugueseSpanish

Request a Quote / Contact Us!

Manufacturer

Part Number or Numbers

LAPLACE REFERENCE SOURCES

  • Reference sources are compact signal sources that facilitate the calibration of EMC test equipment.

    There are 2 types… conducted and radiated……..
    The Conducted source (CRS+) is simply plugged directly into a LISN or used with a voltage probe and will check the calibration of the complete measurement system.
    The Radiated source (ERS) will check both the site and the measurement equipment. This is particularly important as the greatest source of measurement uncertainty is invariably the site.

    All references sources are supplied complete with calibration data which for both the CRS+ and the ERS are traceable to NPL (UK)

    Key points:

    • RF output: From detachable antenna

    • RF signal: Continuous, steady state,
      narrow band, harmonic series.

    • Amplitude stability: 0.5dB (short term)

    • Drift over time: 1dB/annum

    • Harmonic spacing 2MHz

    • Frequency range: 30MHz—1GHz

    • Frequency stability: 80ppm

       RF level at 3m 50—73 dBuV/m

    • Power: Internal battery (LiMH)

    • Running time: 6 hours

     

     CRS + CONDUCTED REFERENCE SOURCE


    CRS+ Front View CRS+ Rear View

    Key points:

    •  Frequency range 15KHz—30MHz

    •  Frequency stability Crystal source 80ppm

    •  Signal type Harmonic series (Narrow band)

    •  Output level 37dBuV—49dBuV (see reverse)

    •  Output channel Push-button selection of L1 or L2

    •  Calibration Individual UKAS traceable

    •  Indication L1 or L2 active

    •  Frequency spacing 10KHZ

    •  Output connection Adapter cable to UK, US or Schuko

    •  Low voltage detection Auto shut down

     

    ASSOCIATED DOWNLOADS

    Laplace Instruments CRS+ Users Manual User manual – CRS+ – User manual for the Conducted Reference Source

    Laplace Instruments CRS+ Data Sheet Conducted reference source – Data sheet

    Laplace Instruments Demonstrating the CRS+Laplace Instruments Demonstrating the CRS+

     

    Related Products 

    SA3000 3GHz EMC emissions Analyzer – High performance, PC controlled, 3GHz EMC analyzer with powerful Windows software application.

     Antennas for EMC testing – Antennas are normally required for the measurement of radiated emissions. Laplace offers a wide range of antennas to suit the various requirements. These include standard broadband antennas, miniature antennas and Large Loop Antennas