mk-messtechnik Accessories

General equipment
Accessories for the Type U analogue transmitter
Accessories for the dAV series
Personal Computers
Digital photography
General lab-equipment
Misc
· · F2V-100
· · Multichannel Charger in 19″ case
· · Multichannel Charger in Table Top Housing
· · R&D Services
· · FAQ

General equipment

Charger Friwo MPP-15 with two- or three-poled connector, Type Binder 712. The two-poled version is the standard and is used by other manufacturers in the section of EMC-measurement engineering. Three-poled connectors are used with our devices which have internal batteries as well as a possibility to connect additional external batteries. 1-10 cells NiMH and NiCd, charging current approx. 700mA. Available from stock

 

Charger Friwo MPP-15 without alteration for the use with own connectors or with the provided adapters (several phone jacks and DC-connectors). Available from stock

 

Chargers for single cells, e.g. for digital cameras, remote controls etc.

Charging cable, one side with two- or three-poled connector, Type Binder 712, the other side with 4mm-lab-connectors (banana connectors) for the use with available chargers with 4mm-connectors

Charger for lead-acid batteries, different versions available. Please specify your requirements such as battery-voltage(s) and charging current

Optical cables, simplex and duplex optical cables with FSMA-connectors with the lengths 10m, 20m, and 30m are generally delivered from stock. Other lengths and other connectors (ST, LC etc.) are mostly available at short notice.

Bushings/adapters for optical cables with FSMA-connectors delivered from stock, other connectors available on demand

Power supply 6V/1A,7V/1A (e.g. for dAV-R /Audio-/Video-receiver), available from stock

Power supply 12V/2.5A, e.g. for the multichannel dAV-receiver, available from stock

Battery cable for batteries in cameras (two-poled, Binder 712), different lengths

Battery cable for additional external batteries (three-poled, Binder 712) for Type U and optoLVDS, length approx. 15cm

Connector cable with 12-poled plug (Binder Series 680), compatible to Rohde & Schwarz antennas and measuring adapters and to the power supply BV10D

Different adapters BNC-cinch, Cinch-Scart, BNC-N etc. of renowned manufacturers (Telegärtner, Rosenberger, Hirschmann,…)

Power cables, foreign versions available as well

---

Accessories for the Type U analog transmitter

Input filters for Type U analog transmitters with the frequencies 10kHz, 100kHz, 250kHz, 1MHz, 10MHz, 20MHz, 30MHz, and divider-ratios of 1:1, 2:1, 3:1, and 4:1 are available at short notice. Other frequencies and dividers on demand.

Output filters for Type U analog receivers with the frequencies 10kHz, 100kHz are now available. With these filters the use of Type U-receivers for emission and susceptibility tests is made easier. Interfering high-frequency signal parts are reduced to a great extent and external interferences incriminates the receiver output to a much lesser extent. These filters have the same housing as the provided input filters.

---

Accessories for the AV-series

External displays for the camera systems dAV-C (3.5″). The displays are delivered with a fixed connector cable which is compatible to our cameras. 

These displays are also available without alteration for the use in your own projects. For power supply, you will then need an according power supply unit with 12V/400mA and a 2.1mm-DC-connector. An AV-connector cable is provided.

Wooden tripods for the mounting of cameras etc. in susceptibility tests. Wooden tripods have already been used for a long time in the EMC-section since they are not conducting. Several manual pan/tilt units are available for the tripods as well as a pan/tilt units which can be connected to the camera dAV-Cr and controlled by the receiver DAV-Rr.

AV-cable with Cinch- or Scart-connectors, of different lengths.

Wide-angle, tele and close-up lenses for video cameras and digital cameras.

---

Personal Computers

Network cables, USB cables, computer equipment and components, complete systems

---

Digital photography  

Digital cameras for documentation (we can provide all current manufacturers such as Olympus, HP, Canon, Sony, Casio, Pentax, Panasonic, Fuji film, Nikon etc. and the according accessories from companies like Sigma, Tamron, Metz, Soligor, B+W etc.)

Wide-angle, tele and close-up lenses for video cameras and digital cameras

Memory cards, card readers, batteries, flashlights, and further equipment for digi-cams

---

General lab-equipment

Display units for monitoring, chassis for 19″-racks, holders for walls and ceilings

Power supplies, measuring devices, cables, and lines

---

Misc

Prototype cases, individual items. If you need a small amount of a specific case for your requirements, we will gladly help you within the limits of our technical facilities (CNC-lathe and milling machines, drilling machines, saws,…).

 

 

F2V-100

The F2V-100 is used for the conversion of a frequency signal into a voltage proportional to the frequency. The device has 4 frequency areas with a maximum frequency of 100 Hz, 1 kHz, 10 kHz und 100 kHz. The output voltage is linearly dependent on the input frequency and has a maximum frequency of a fixed measuring range of 10 V DC. This system can be used as a tachometer in vehicles and the gathering of sensor signals.

 mk-messtechnik F2V-100 Data Sheet

Multichannel chargers in 19″ case

For all our devices with integrated batteries, standard chargers are included. If you purchase several devices however, one of our multichannel chargers could save you some space. In addition, you can charge several of our devices at the same time.
The «small» version with half rack housing includes up to 15 charging channels with control LEDS (ready, fault, and charge LED). For each channel, the number of cells, charging voltage, and current are noted. The device to be charged is connected with a special charging cable provided by us.
In addition, we can provide a multichannel charger in a 19″ case with 1, 2, or 3 HU, depending on the ordered number of charging channels (up to 30).

 mk-messtechnik Multichannel Charger (19 inch rack and Table Top versions) Manual

Multichannel charger in table top housing

For all our devices with integrated batteries, standard chargers are included. If you purchase several devices however, one of our multichannel chargers could save you some space. In addition, you can charge several of our devices at the same time.
The «smallest» version of our chargers includes 4 charging channels with control LEDS (ready, fault, and charge LED). For each channel, the number of cells, charging voltage, and current are noted. The device to be charged is connected with a special charging cable provided by us.

 mk-messtechnik Multichannel Charger Manual 

Research & development services
With the help of the most modern technologies and tools we develop a diversity of different systems with the greatest efficiency for the best price. Our strengths lie in the following areas:
· Optical transmitters for potential free transmission of measuring signals (analogue bandwidth approx. 30 MHz)

• Digital and analogue transmission and gathering of signals
• Probes for electric and magnetic fields
• Amplifiers, generators
• Power supply for laboratory settings
• Battery systems
• Accessories for EMC-measurings
• Audio- and video-components
• PC-connection (serial, parallel, USB, Firewire, IEC-Bus, LAN)
  ..and many other different components and systems you need to have developed! Just ask, we will surely find the suitable solution to your problems and applications.

 

 mk-messtechnic Optical Fiber Component Cleaning Instruction

 

	Rosenberger HSD cables
Rosenberger HSD 2xZ – SUB-D9 confectioned adapter cable	confectioned cable with 2x Rosenberger HSD universal coded connector to female SUB-D9 the adapter cable is ONLY meant for lab use together with our optoLAN 100BaseT1 interfaces cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795) others on request, might need to be supplied by customer standard pin out compatible e.g. with Vector VN5640 (channel 1 + 2): Channel 1 BR_P: HSD Pin 1 => SUB-D9f Pin 4 BR_N: HSD Pin 3 => SUB-D9f Pin 5 Channel 2: BR_P: HSD Pin 1 => SUB-D9f Pin 1 BR_N: HSD Pin 3 => SUB-D9f Pin 2 cable length: tbd – please add in PO to avoid delays (up to 2m same price)
Rosenberger HSD cable Z – open end	cable with Rosenberger HSD universal coded connector – open end for self configuration length: ~2m color coding Side A: 1: blue 2: orange 3: green 4: brown color coding Side B: 1: brown 2: green 3: orange 4: blue
Rosenberger HSD cable Z – USB Type A female plug	short adapter cable with Rosenberger HSD universal coded connector – Type A female plug high quality fully shielded confectioned solution to connect Hub side transceiver to DUT (e.g. webcam) with original wire harness length: ~0.2m
Rosenberger HSD cable Z – USB Type A male plug	cable with Rosenberger HSD universal coded connector – Type A male plug high quality fully shielded confectioned solution for direct DUT connection (connect PC side USB transceiver directly to DUT => e.g. PC) length: ~2m
Rosenberger HSD cable Z – USB Type B male plug	cable with Rosenberger HSD universal coded connector – Type B male plug high quality fully shielded confectioned solution to connect Hub side USB transceiver directly to DUT (e.g. webcam) length: ~2m
Rosenberger HSD Z – confectioned adaption to existing cable	Adaption of Rosenberger HSD universal connector to existing cable (max. diameter restrictions: outer diameter: max. 4,8mm; wire gauge: max. 0,35mm^2) cable to be delivered by customer, together with pin requirement (such as: P = color 1, N= color 2)
Rosenberger HSD Z – SUB-D9 confectioned adapter cable	confectioned cable with Rosenberger HSD universal coded connector to female SUB-D9 (metal) The adapter cable is ONLY meant for lab use together with our optoLAN 100BaseT1 interfaces cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795) others on request, might need to be supplied by customer standard pin out compatible e.g. with Vector VN5640 (channel 1): BR_P: HSD Pin 1 => SUB-D9f Pin 4 BR_N: HSD Pin 3 => SUB-D9f Pin 5 cable length: tbd – please add in PO to avoid delays (up to 2m same price)
Rosenberger HSD Z open end confectioned adapter cable	confectioned cable with Rosenberger HSD universal coded connector to open end for self confectioning This adapter cable is ONLY meant for lab use together with our optoLAN 100BaseT1 interfaces cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795) others on request, might need to be supplied by customer standard pin out: BR_P: HSD Pin 1 => white BR_N: HSD Pin 3 => green cable length: tbd – please add in PO to avoid delays (up to 2m same price)
	Rosenberger HSD cables Z – USB
Type A female plug	Rosenberger HSD cable Z – USB Type A female plug short adapter cable with Rosenberger HSD universal coded connector – Type A female plug high quality fully shielded confectioned solution to connect Hub side transceiver to DUT (e.g. webcam) with original wire harness length: ~0.2m
Type A male plug	Rosenberger HSD cable Z – USB Type A male plug cable with Rosenberger HSD universal coded connector – Type A male plug high quality fully shielded confectioned solution for direct DUT connection (connect PC side USB transceiver directly to DUT => e.g. PC) length: ~2m
Type B male plug	Rosenberger HSD cable Z – USB Type B male plug cable with Rosenberger HSD universal coded connector – Type B male plug high quality fully shielded confectioned solution to connect Hub side USB transceiver directly to DUT (e.g. webcam) length: ~2m

 

 mk-messtechnic Rosenberger HSD Ethernet Harness Pin Out

 

LWL-L-1 Options
LWL-1 b20	Simplex optical fiber (62,5/125µm), length from 20m, FSMA-FSMA Please name requested length in purchase order!
LWL-1 b50	Simplex optical fiber (62,5/125µm), length from 20m up to 50m, FSMA-FSMA Please name requested length in purchase order!
LWL-1 b100	Simplex optical fiber (62,5/125µm), length up to 100m, FSMA-FSMA Please name requested length in purchase order!
LWL-2 b20	Duplex optical fiber (62,5/125μm), length up to 20m, FSMA-FSMA Please name requested length in purchase order!
LWL-2 b50	Duplex optical fiber (62,5/125μm), length from 20m up to 50m, FSMA-FSMA Please name requested length in purchase order!
Ruggeized Fiber Optic Cables
LWL-1-rug b100 fix install	ruggedized simplex optical fiber (62,5/125μm) for fix installation. length up 100m possible, FSMA-FSMA
LWL-1-rug b100 fix install per cm	per cm
LWL-1-rug b100 fix install 10m	ruggedized simplex optical fiber (62,5/125μm) for fix installation. length 10m, FSMA-FSMA
LWL-1-rug b100 fix install 40m	ruggedized simplex optical fiber (62,5/125μm) for fix installation. length 40m, FSMA-FSMA
LWL-2-rug b100 fix install	ruggedized duplex optical fiber (62,5/125μm) for fix installation. length up 100m possible, FSMA-FSMA. your requested total length: x m
LWL-2-rug b100 fix per cm	per cm
LWL-2-rug b100 fix install 10m	ruggedized duplex optical fiber (62,5/125μm) for fix installation. length 10m, FSMA-FSMA
LWL-2-rug b100 fix install 40m	ruggedized duplex optical fiber (62,5/125μm) for fix installation. length 40m, FSMA-FSMA
LWL-1-rug b100	ruggedized simplex optical fiber (62,5/125μm) for mobile use. one side strain relief, length up 100m possible, FSMA-FSMA your requested total length: x m
LWL-1-rug b100 per cm	per cm
LWL-1-rug b100 10m	ruggedized simplex optical fiber (62,5/125μm) for mobile use. one side strain relief, length 10m, FSMA-FSMA
LWL-1-rug b100 40m	ruggedized simplex optical fiber (62,5/125μm) for mobile use. one side strain relief, length 40m, FSMA-FSMA
LWL-2-rug b100m	ruggedized duplex optical fiber (62,5/125μm) for mobile use one side strain relief, length up 100m, FSMA-FSMA your requested total length: x m
LWL-2-rug b100m per cm	per cm
LWL-2-rug b10m	ruggedized duplex optical fiber (62,5/125μm) for mobile use one side strain relief, length 10m, FSMA-FSMA
LWL-2-rug b40m	ruggedized duplex optical fiber (62,5/125μm) for mobile use one side strain relief, length 40m, FSMA-FSMA