Seibersdorf Laboratories- PLA-R Precision Loop Antenna Receive

SEIBERSDORF PRODUCTS

Antennas
• PLA-R Precision Loop Antenna Receive
• PLA-SET Precision Loop Antenna Set For Site Validation
• POD 16 And POD 618 Precision Omnidirectional Dipoles Antennas
• PRD-Precision Reference Dipole
• PCD 3100 Precision Conical Dipole
• PCD 8250 – Precision Conical Dipole
Antenna Sets
• MS1 - Site VSWR Set
• MS2 - POD Antenna Set
• MS3 - MS1 Site VSWR Set without CalStan Software
• MS4 - Site VSWR Set - Automatic
• MS5 - PLA-Set for NSA validation
Antenna Site VSWR Positioners
CalStan 11.0 – RF Measurement Software
Comb Generators RefRad
Site Validation Services
• Absorber Return Loss - 200 MHz - 18 GHz
• ALSE – Absorber Lined Shielded Enclosure Measurements
• Ambient Noise Measurement
• Antenna Calibration Test Site Validation CISPR 16-1-5 30 MHz - 1 GHz
• Automotive Component Test Site Validation CISPR 25 150 KHz - 3 GHz
• Chamber FActor CENELEC R210-003 30 MHz - 1 GHz
• CTIA Ripple Test for Mobile Station 722 MHz - 2132.5 MHz
• CTIA Validation
• Field Uniformity Measurement
• Freespace VSWR Measurements
• NSA – Normalized Site Attenuation
• Shielding Effectiveness Measurement
• Site VSWR Measurement
• Table Influence
• Transmission Loss 1 Ghz - 40 Ghz

SEIBERSDORF LABORATORIES
Seibersdorf Laboratories Company
Seibersdorf Laboratories Data Sheets
Seibersdorf Laboratories Product List

Request a Quote / Contact Us!

PLA-R Receive Antenna

Seibersdorf Laboratories PLA-R Receive Antenna

Seibersdorf Laboratories PLA-R Receive Antenna Precision Loop Antenna

The PLA-R antenna is an active, battery powered loop antenna for fully compliant radiated disturbance measurements. Due to the broad frequency range from 9 kHz to 30 MHz it is suitable for all emission standards.

A very low noise floor allows for compliance measurements with low limits. Furthermore, the passive operation mode ensures that strong emissions e.g. from wireless charging applications are no problem.

With the integrated tripod, positioning is convenient and fast as the loop antenna needs to be oriented in x, y and z orientation. Two integrated laser pointers support the alignment.

Saturation Indication:
The patent pending circuit avoids erroneous measurements. In case of overload the PLA-R generates a pulsed signal which saturates the EMI receiver. The detection is done “automatically” by the EMI measurement software. No further saturation control mechanism is required. This works with all modern EMI receivers and test software.

Product Highlights:
• Patent pending saturation indication
• Very low noise floor
• Fully compliant to CISPR 16-1-4 (draft)
• Integrated tripod with laser alignment
• Battery powered
• Individually calibrated

Model #	Product Description	No.
PLA-R	The PLA-R antenna is an active, battery powered loop antenna for fully compliant radiated disturbance measurements. Due to the broad frequency range from 9 kHz to 30 MHz it is suitable for all emission standards. • receive Loop antenna 9 kHz – 30 MHz • Antenna stand for x, y and z orientation of the antenna • Battery charger • Flight case	MA9
PLA-T	The PLA-T antenna is an active, battery powered loop antenna intended for Site Validation Testing in connection with PLA-R. No external power amplifier or low noise preamplifier is required. • transmit Loop antenna 9 kHz – 30 MHz • Antenna stand for x, y and z orientation of the antenna • Battery charger • PLA-TC Transmit Antenna Control Unit • PLA-DC Ground Loop Decoupling Unit • Flight case	MA10