EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    AARONIA BROADBAND PRE-AMPLIFIERS

    Aaronia Broadband Pre-Amplifiers
    • Aaronia Low Noise Amplifier UBBV 0910 – 9kHz~6GHz
    • Aaronia Bypass Amplifier UBBV 1060 BPA – 100MHz~6GHz 
    • Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20 – DC~20GHz 
    • Aaronia 40dB Broadband Preamplifier UBBV1 – 1MHz~1GHz 
    • Aaronia 40dB RF Broadband Preamplifier UBBV2 – 1MHz~10GHz
    • Aaronia 25dB Low Frequency Amplifier UBBV-NF-25 – 1Hz~60MHz 
    • Aaronia 35dB Broadband Pre-amplifier UBBV-NF-35 – 1Hz~30MHz

    4 Aaronia Matrix Low noise Pre-amplifier UBBV 0910 (9kHz to 6GHz)5 Aaronia Matrix RF Pre-amplifier DC to 20GHz UBBV DC206 Aaronia Matrix Low frequency amplifier UBBV-NF-25 (1Hz to 50MHz)7 Aaronia MatrixvBroadband Pre-amplifier 1Hz to 30MHz UBBV-NF-35

    Aaronia Low Noise Amplifier UBBV 0910 – 9kHz to 6GHz 

    Aaronia Low Noise Amplifier UBBV 0910
    Aaronia Low Noise Amplifier UBBV 0910 
    Low Noise Amplifier UBBV 0910 Ultra low noise pre-amplifier up to 6GHz. Works with any brand of Spectrum Analyzers. Directly fits to SPECTRAN Handheld Analyzer. Low noise of only 0,4dB and gain of typ. 22dB. 

    Technical data 
     Frequency range: 9kHz to 6GHz (provides gain up to 10GHz)
     Noise: 0,4dB (typ.)! Gain: 22dB (typ.), see datasheet graph 
     Max. power at RF input: +10dBm 
     Max. power at RF output: +8dBm
     Saturation power: -12dBm (50 ohms)
     Input: 50 Ohm SMA (f) 
     Output: 50 Ohm SMA (m) 
     Weight: 146gr Dimensions: 81x61x29mm 
     Warranty: 10 years 

    Highlights: 
     ULTRA LOW NOISE OF ONLY 0,4dB!
     Suitable for any brand of 
     Spectrum Analyzers or antennas 
     Fits perfectly to any SPECTRAN (mounting brackets included) 
     Runs with battery or external power supply 
     VERY LONG RUNTIME UP TO 30 HOURS WITH A FULL CHARGE! 
     Integrated calibration data on EEprom (readout via integrated USB interface, in preparation) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter

    Included in delivery
     UBBV 0910 RF Broadband Preamplifier 
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection 
     Detailed English manual (on CD) 
     SMA tool 
     Cleaning brush

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV 0910 Series Broadband Pre-Amplifier Data Sheet

    Aaronia Bypass Amplifier UBBV 1060 BPA – 100MHz to 6GHz 

     

    Aaronia Bypass Amplifier UBBV 1060 BPA
    Aaronia Bypass Amplifier UBBV 1060 BPA

    Bypass Amplifier UBBV 1060 BPA Low noise pre-amplifier with bypass-mode up to 6GHz. Works with any brand of Spectrum Analyzers. Adjust to weak or strong signals at the press of a button. 0,4dB Noise, typ. 23dB gain and +48dBm IP3. 

    Highlights: 
     WITH BYPASS-MODE FOR STRONG SIGNALS! 
     Suitable for any brand of Spectrum Analyzers or antennas 
     Fits perfectly to any SPECTRAN (mounting brackets included) 
     Runs with battery or external power supply 
     LONG RUNTIME UP TO 8 HOURS WITH A FULL CHARGE! 
     Integrated calibration data on EEprom (readout via integrated USB interface, in preparation) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter 

    Technical data 
     Frequency range: 100MHz to 6GHz
     Noise: 0,9dB (Bypass-Mode) / 1,4dB (Amp. ON) 
     Gain: 23dB (typ.), see datasheet graph IP3: +34dBm (Amp. ON) / +48dBm (Bypass-Mode) 
     Max. power at RF output: +21dBm
     Input: 50 Ohm SMA (f) 
     Output: 50 Ohm SMA (m) 
     Weight: 146gr 
     Dimensions: 81x61x29mm 
     Warranty: 10 years 

    Included in delivery 
     UBBV 1060 BPA RF Broadband Preamplifier 
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection 
     Detailed English manual (on CD) SMA tool Cleaning brush

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV 1060 Series Broadband Pre-Amplifier Data Sheet

    Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20 – DC to 20GHz 

     

    Aaronia 15dB Ultra-Wideband Pre-amplifier UBB
    Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20

    15dB Ultra-Wideband Pre-amplifier UBBV DC20 The allround amplifier up to 20GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Very flat gain and unreached broadband performance. 

    Highlights: 
     Suitable for any brand of 
     SpectrumAnalyzers or antennas 
     Fits perfectly to any SPECTRAN (mounting brackets included) 
     Runs with battery or external power supply 
     Integrated LiPo battery (up to 3,5h run time) 
     Integrated calibration data on EEprom (readout via integrated USB interface, in preparation) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter

    Technical data 
     Frequency range: DC to 20GHz 
     Noise: 2,5dB (typ.) 
     Gain: typ. 14dBi (graph see datasheet) 
     Max. power at RF input: +15dBm 
     Max. power at RF output: +16dBm
     Saturation power: 0dBm (50 ohms)
     Input: 50 Ohm SMA (f) 
     Output: 50 Ohm SMA (m) 
     Weight: 146gr 
     Dimensions: 81x61x29mm 
     Warranty: 10 years 

    Included in delivery 
     UBBV DC20 RF Broadband Preamplifier 
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection 
     Detailed English manual (on CD) 
     SMA tool 
     Cleaning brush

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV DC20 Series Broadband Pre-Amplifier Data Sheet

     

    Aaronia 40dB Broadband Preamplifier UBBV1 – 1MHz to 1GHz 

    Aaronia 40dB Broadband Preamplifier UBBV1
    Aaronia 40dB Broadband Preamplifier UBBV1

    40dB Broadband Preamplifier UBBV1 Low Noise Broadband Pre-Amplifier. Directly fits to any SPECTRAN. Also works with any other brand of Spectrum Analyzers. Offers o broad frequency range and increases the sensitivity by up to 40dB

    Highlights: 
     Suitable for any brand of Spectrum Analyzers or antennas 
     Fits perfectly to any SPECTRAN (mounting brackets included)
     Runs with battery or external power supply 
     Integrated LiPo battery (up to 3,5h run time) 
     Integrated calibration data on EEprom (readout via integrated USB interface) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter

    Technical data 
     Frequency range: 1MHz to 1GHz
     Noise: 3,5dB (typ.) 
     Gain: 40dB (typ.) 
     Max. power at RF input: +15dBm 
     Max. power at RF output: +15dBm 
     Saturation power: -25dBm (50 ohms)
     Input: 50 Ohm SMA (f) Output: 50 Ohm SMA (m)
     Weight: 146gr 
     Warranty: 10 years 

    Included in delivery 
     UBBV1 EMC Broadband Preamplifier 
     2 mounting brackets for SPECTRAN 
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection*
     Detailed English manual (on CD) 
     SMA tool Cleaning brush 
     * If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV1 Series Broadband Pre-Amplifier Data Sheet

    Aaronia 40dB RF Broadband Preamplifier UBBV2 – 1MHz to 10GHz

    Aaronia 40dB RF Broadband Preamplifier UBBV2
    Aaronia 40dB RF Broadband Preamplifier UBBV2 
    40dB RF Broadband Preamplifier UBBV2 High-gain RF Pre-amplifier up to 10GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Broadband RF sensitivity increase by up to 40dB. 

    Highlights: 
     Suitable for any brand of Spectrum Analyzers or antennas
     Fits perfectly to any SPECTRAN (mounting brackets included)
     Runs with battery or external power supply 
     Integrated LiPo battery (up to 3,5h run time)
     Integrated calibration data on EEprom (readout via integrated USB interface) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter

    Technical data 

     Frequency range: 1MHz to 10GHz (500kHz with 3dB difference) 
     Noise: 3,5dB (typ.) 
     Gain: 40dB (typ.) with «linear» fall off: 1MHz: 40dB; 3GHz: 37.5dB; 6GHz: 35dB; 8GHz: 25dB; 10GHz: 20dB 
     Max. power at RF input: +15dBm
     Max. power at RF output: +15dBm 
     Saturation power: -25dBm (50 ohms)
     Input: 50 Ohm SMA (f) 
     Output: 50 Ohm SMA (m) 
     Weight: 146gr 
     Warranty: 10 years 

    Included in delivery 
     UBBV2 RF Broadband Preamplifier
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection*
     Detailed English manual (on CD) 
     SMA tool Cleaning brush 
     * If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV2 Series Broadband Pre-Amplifier Data Sheet

    Aaronia 25dB Low Frequency Amplifier UBBV-NF-25 – 1Hz to 50MHz 


    Aaronia 25dB Low Frequency Amplifier UBBV-NF-25 
    25dB Low Frequency Amplifier UBBV-NF-25 Pre-amplifier up to 60MHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Specialized for the low frequency range (Hz / kHz / low MHz range). 

    Highlights: 
     Suitable for any brand of Spectrum Analyzers or antennas
     Fits perfectly to any SPECTRAN (mounting brackets included) 
     Runs with battery or external power supply 
     Integrated LiPo battery (up to 3,5h run time)
     Integrated calibration data on EEprom (readout via integrated USB interface) 
     Very thick (2mm) aluminum housing offering very good screening 
     Includes international charger (110V/220V) and adapter

    Technical data
     Frequency range: 1Hz to 50MHz (60MHz with -3dB bandwidth) 
     Gain: 25dB (typ.) 
     Max. input DC voltage: 10VDC 
     Max. input AC voltage: 3V or 2.1V RMS 
     Max. output power: +15dBm (50 Ohm) 
     Input: High impedance (100 kOhm) 
     SMA (f) Output: 50 Ohm SMA (m)
     Weight: 146gr 
     Warranty: 10 years 

    Included in delivery 
     UBBV-NF-25 Broadband Preamplifier 
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection 
     Detailed English manual (on CD) 
     SMA tool 
     Cleaning brush

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV-NF-25 Series Broadband Pre-Amplifier Data Sheet

     

    Aaronia 35dB Broadband Pre-amplifier UBBV-NF-35 – 1Hz to 30MHz 


    High-End Preamplifier up to 30MHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Specialized for ultralow frequency signals.

    Highlights: 
     Frequency range: 1Hz to 30MHz (35MHz with -3dB bandwidth)

     Gain: 35dB (typ.)

     Max. input DC voltage: 10VDC

     Max. input AC voltage: 3V or 2.1V RMS

     Max. output power: +10dBm (50 Ohm)

     Input: High impedance (100 kOhm)

     SMA (f) Output: 50 Ohm SMA (m)

     Weight: 146gr

     Warranty: 10 years

    Included in delivery 
     UBBV-NF-35 Broadband Preamplifier 
     2 mounting brackets for SPECTRAN
     LiPo-Battery (integrated) 
     Battery charger and power supply incl. international adapter set 
     Aluminum carrying case with foam protection 
     Detailed English manual (on CD) 
     SMA tool 
     Cleaning brush

    Aaronia_AG_EMC_Analyzer_Bundle-1_Data_Sheet Aaronia UBBV-NF-35 Series Broadband Pre-Amplifier Data Sheet