EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    Schwarzbeck ACCESSORIES

    Schwarzbeck Accessories

    ACS 110 – Traveler Charger for Probes and Antennas

    ACT 461G – Audio Coupling Transformer

    BN 1701 – Buffer Network
    BD 9501 – IEEE-488 Bus-Feed Through

    CA 9607 – Universal Calibration Adapter for Current Clamps

    CA 9608 – Universal Calibration Adapter

    CAP 10 – 10 µF Capacitor for NNBM 8124. For airborne equipment

    CAP 10 8226-2 – 10 μF capacitor for NNBL 8226-2 LISN and for military equipment

    CCA – Product Transport Cases

    CCC 9224 – Capacitive Coupling Clamp

    CCC 9225 – Capactive Coupling Plate

    CISPR 17 Equipment – Transformers

    CP 9610 – Current Sensor

    CVP 9222 C – High Impedance Capacitive Voltage Probe

    CVP 9222 – High Impedance Capacitive Voltage Probe

    HPF – High Pass Filter

    HPF 150 k – High Pass Filter

    KU 9608 – Coaxial and Line Switch

    SW 9602 – Current Transformer

    SW 9603 – Current Transformer

    SW 9605 – Current Transformer

    SW 9606 – Current Injection Clamp

    TF 130-150 – Test Fixture for Ford RI 130/ 150

     

    ACS 110 Traveler Charger for Probes and Antennas 
     · Charger for Probes and Antennas with built in with built in NiMH-batteries
    ACT 461G – Audio Coupling Transformer
    Audio coupling transformer for conducted audio frequency susceptibility tests as required by MIL STD 461G and other standards.
    Frequency range 10 Hz – 250 kHz, 200 W, turn ratio 2:1.
    Output and input: wing terminals.

     

    BN 1701 Buffer Network 
    Schwarzbeck BN 1701 Buffer network  (CISPR 17)
    · Buffer network  (CISPR 17)
     · Frequency range: 100 kHz – 30 MHz
     · max. 32 A
    pdficon small Data Sheet BN1701

     

    BD 9501 IEEE-488 Bus-Feed Through 
     · IEEE-488 Bus-Feed through for flange mounting
    (shielded rooms) (other feed throughs on request)
     Data Sheet BD 9501
    CA 9607 Universal Calibration Adapter for Current Clamps 
    Schwarzbeck CA 9607 Calibration Adapter
    · Universal calibration adapter for current clamps
     · test jig for ferrites
     Data Sheet CA 9607
    CA 9608 Universal Calibration Adapter 
    Schwarzbeck CA 9608 Calibration Adapter 
    · 
    Universal calibration adapter for e.g. the following current clamps:
     · R&S ESV-Z1, Prodyn, IT-050-1
     · length and height settable
     Data Sheet CA 9608
    CAP 10 10 µF Capacitor for NNBM 8124 
    Schwarzbeck CAP 10
    · 10 µF Capacitor for NNBM 8124
    · 500 V (AC)
    · 400 Hz
    · DEF STAN 59, DO 160
    Schwarzbeck Calibration adapters for V-LISN (V-AMN) Data Sheet Schwarzbeck CAP 10 10uF Capacitor for NNBM LISN Data Sheet
    CAP 10 8226-2 10 μF capacitor for NNBL 8226-2 LISN 
    Schwarzbeck CAP 10 8226-2 10uf Capacitor for NNBL 8226-2 500  AC 400 Hz
    To be compliant to the standard MIL 461F (method CS 101-4 and CS 106-3) a 10 μF capacitor like the CAP 10 8226-2 has to be connected to the mains connectors of the LISN.

     

    Schwarzbeck Calibration adapters for V-LISN (V-AMN) Data Sheet Schwarzbeck CAP 10 8226 2 10uF Capacitor for NNBL 88226 2 LISN Data Sheet

     

    CCA Product Transport Cases 
    Schwarzbeck CCA for 9108A_9124_9177
    Schwarzbeck CCA
     · CCA product transport cases keep your equipment safe, at any time. During transport or for safe storage
     · Individual for your product
     · A combination of products in one case are possible
     · More information about CCA and some examples are
    shown in the Data Sheet
    pdficon small Data Sheet CCA
    CISPR 17 Equipment 
    Schwarzbeck SY9223-17 Wideband Transformer
    · Transformers
     · fixtures and adapters to measure filters
     · ferrites and other passive components.
     · Detailed product list and data sheets on request.
     Data Sheet CISPR 17 Equipment
    CP 9610 – Current Sensor 
    schwarzbeck-cp-9610
    The current sensor CP 9610 can measure up to 40 A in a frequency range from DC – 1 MHz. It is galvanically isolated and can withstand a maximum voltage of 210 VPK / VDC. The internal resistance of the conductive path is less than 3 mΩ, providing low power loss. The hall transducer is temperature compensated and allows high accuracy over temperature.

     

    Frequency Range:
    DC – 1 MHz
    Output Connector:
     BNC (1 MΩ)
    Current Sensing Range:
     -40 A – +40 A
    Nominal conversion factor:
     50 mV/A
    Internal Conductor Resistance:
     < 3 mΩ
    Typical Output Error:
     ±3 %
    Dimension:
     105 x 44 x 115 mm
    Typical Operation Time:
     24 h
    EuT Connector:
     Wing terminals
    Power Supply:
     3.7 V, 2.6 Ah Lithium Ion
    Weight:
     430 g

     

     Schwarzbeck CP 9610 – Current Sensor Data Sheet

     

    CVP 9222 High Impedance Capacitive Voltage Probe 
    Schwarzbeck CVP 9222 High Impedance Capacitive Voltage Probe
    Schwarzbeck CVP 9222 High Impedance Capacitive Voltage Probe
     · High Impedance Capacitive Voltage Probe according to to CISPR 22
     · EN 55022 C 1.3
     · Frequency range: 9 kHz – 100 MHz
    Options:
     · Option ACS 110:Charger ACS 110 for CVP 9222
     · Option CAL 9222: Calibration Adapter for CVP 9222
    pdficon small Data Sheet CVP 9222
    CVP 9222 C High Impedance Capacitive Voltage Probe 
    Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe
    Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe with Cable Holder Lid Open
     Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe with Cable Holder Lid Open Side View
    High Impedance Capacitive Voltage Probe acc. to
    CISPR 22
    EN 55022 C 1.3
    Frequency range: 9 kHz – 100 MHz
    Options:
     · Option ACS 110: Charger ACS 110 for CVP 9222, CVP 9222 B and CVP 9222 C
     · Option CAL 9222 B: Calibration Adapter for CVP 9222, CVP 9222 B and CVP 9222 C
    pdficon small Schwarzbeck CVP 9222 C High Impedance Capacitive Voltage Probe Data Sheet

     

    HPF High Pass Filter 
    Schwarzbeck HPF High Pass Filter
     · High Pass Filter
     · 35 – 1000 MHz
     · Insertion loss at 27.12 MHz type 100 dB
     Data Sheet HPF
    HPF 150 k High Pass Filter 
    Schwarzbeck HPF 150 k High Pass Filter
    The HPF is a passive LC-Filter with female N-connectors in shielded metal housing with very steep slope according to CISPR 16-1-1. 
    The main application is the elimination of noise below 150 kHz for conducted interference voltage measurements. 
    Particular features are high pulse load capacity and dielectric strength.
    Specifications
    Frequency Range
    9 kHz – 30 MHz
    Fundamental frequency:
    150 kHz
    Nominal impedance:
    50 Ω
    Continuous power:
    100 W
    Passband loss:
    < 1.5 dB
    Passband VSWR:
    < 2
    Stopband loss:
    >50 dB @ ≤ 130 kHz
    Housing material:
    Aluminium
    Housing dimensions:
    (with connector)
    50 x 105 x 240 mm
    Weight:
    860 g
    Connector:
    2 x N female
     Schwarzbeck HPF 150 k High Pass Filter Data Sheet

     

    KU 9608 Coaxial and Line Switch 
     · Coaxial and line switch for measurement of the attenuation of fluorescent lighting fittings
    pdficon small Data Sheet KU9608
    SW 9602 Current Transformer 

    Transformer-SW-9602

     · Current Transformer
     · shielded
     · 0.01 – 200 MHz
     · Transfer Impedance: 1 Ohm for wires up to 6.5 mm
     Data Sheet SW 9602
    SW 9603 Current Transformer 

    Transformer-SW-9603

     · Current Transformer
     · shielded
     · 9 kHz – 150 MHz
     · Transfer Impedance: 1 Ohm for wires up to 14 mm
     Data Sheet SW 9603
    TF 130-150 Test Fixture for Ford RI 130/ 150 
     Schwarzbeck TF-130-150 Test Fixture for Ford RI 130-150 Per EMC-CS-2009
    Schwarzbeck TF-130-150 Test Fixture for Ford RI 130-150 Per EMC-CS-2009
     · Test Fixture for Ford RI 130/ 150 Per EMC-CS-2009
     Data Sheet TF 130-150