Small Biconical Microwave Antennas

• SBA 9112
• SBA 9113 Mini / Small
• 420 NJ Elements for SBA 9112
•Cable Guide for 420 NJ Elements
• SBA 9113 B Mini
• SBA 9119
• 422 NJ Elements for SBA 9119

 

 SBA 9112 Small Biconical Microwave Antenna 

 · Small Biconical Microwave Antenna

 · (1) 3 – 18 GHz

 · 10 W

 · including transport case

 · CISPR16-1-4:2007-02 Ed. 2.0

 · The SBA 9112 are compliant to CISPR 16-1-4 for site validation above 1 GHz.

 · Site validation above 1 GHz

 · (Site-Voltage Standing Wave Ratio (VSWR))

 · mini version on request

 Data Sheet SBA 9112

 E-plane pattern

 H-plane pattern

 VSWR

 Field strength

 

SBA 9113 Mini / Small Biconical Microwave Antenna 

 · Small Biconical Microwave Antenna

 · 0.5 – 3 GHz

 · 20 W

 · mini-version on request

 · CISPR16-1-4:2007-02 Ed. 2.0

 · Site validation above 1 GHz

 Data Sheet SBA 9113

 Radiation Pattern

 SBA 9113 VSWR

 Field strength

 

420 NJ Elements for SBA 9113 Balun 

 · Elements for radiated immunity caused by hand portable transmitters

 · with SBA 9113 or SBA 9113 mini version for the Ford standard RI115 (Ford EMC CS 2009)

Option:

 · Opt: Spacer 50

 · Spacer made of Polystyrene to set the 420 NJ elements test distance to 50 mm.

 420NJ Elements for SBA 9113 Balun Data Sheet

 

422 NJ for SBA 9119 Balun 

The combination of  the flat elements 422 NJ with SBA 9119-Balun provides remarkable fieldstrength levels with moderate transmit power. With approx. 10 Watt transmit power one can reach fieldstrength levels of 300 V/m at a distance of 30 mm.

Required Balun:	SBA 9119
Connector:	N
Frequency Range:	800 MHz … 6 GHz
Nominal Impedance:	50 Ω
Continuous Power:	20 W
VSWR:	< 8 (0.9 GHz < f < 2.4 GHz) < 4 (2.4 GHz < f < 6 GHz)
Material:	Aluminium
Flat Element Dimensions:	108 x 49 x 2 mm
Weight:	50 g
Recommended Spacing:	30 mm
Recommended mesh width:	30 – 50 mm
Options:	Spacer 30 mm
	Other Spacer on request

 422 NJ Data Sheet

 422 NJ Field Uniformity

 422 NJ Assembly Instructions

 SBA 9119 Data Sheet

 

CABLE GUIDE

The cable guide is intended to be used together with the Schwarzbeck´s POSITIONER and lightweight antennas (like the SBA 9113 with 420 NJ elements, which are used for radiated immunity testing).
This device is useful to guide the cable parallel to the POSITIONER. It is composed by two spacer-rods which keep the plastic tube parallel to the POSITIONER at a distance of about 50 cm.
The spacers are fixed to the POSITIONER and to the plastic tube with two pairs of standard AA 9202 adapters.
The diameter of the plastic tube is 22 mm which is suitable to guide a cable with standard N connectors.
Because of the relative large torque which is applied by the cable guide on the POSITIONER it is suggested to mount the cable guide as shown in the product´s photo. The positioner and antenna mast system AM 9144 are not included in the scope of delivery for the cable guide.

Specifications:
Material: PVC (cable guide tube) Aluminum (AA 9202) Stainless steel, PVC (spacer rods)
Weight: 1 kg
Distance between POSITIONER and cable´s guide: ~ 50 cm
Cable´s guide diameter: 22 mm

 Schwarzbeck Cable Guide Data sheet

 

SBA 9113 B small biconical antenna 

 · small biconical antenna

 · 80 MHz – 3 GHz

 · for harmonics measurements According to IEC61000-4-3

 Data Sheet SBA 9113 B

 

SBA 9119 Small Biconical Microwave Antenna 

 · Small Biconical Microwave Antenna

 · 1 – 6 GHz

 · 20 W

 · The SBA 9119 are compliant to CISPR 16-1-4 for site validation above 1 GHz.

 · Including transport case.

 Data Sheet SBA 9119

 Radiation Pattern

 Field Strength