EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    Used Equipment

     

    Rohde & Schwarz HUF Z4

    Rohde and Schwarz HUF Z4

    Rohde and Schwarz HUF Z4 mountRohde Schwarz HUF Z4 Rear View

    HUF Z4 Rohde & Schwarz conical-log spiral antenna 200-1000 MHz in very good conditions, N-female connector. Included in the delivery is the original 300 mm long mounting rod, with diameter of 25,5 mm. On request we can reduce the diameter of the mounting rod to 22 mm, to mount the antenna on our mast system AM 9144, by using the AA 9202 or AA 9203 adapters

     

    NNLA 8119 

    V-LISN, 9 kHz – 30 MHz, 50 µH + 5 Ohm || 50 Ohm, 250 µH isolating choke, 2 x 10 A, BNC connector. Including new calibration certificate.

    Schwarzbeck NNLA 8119

    JASO D 001- 94 

    This 56 mikrohenry LISN is a prototype which never became a list product due to no demand. It is built according to JASO D 001- 94, has a frequency range of 10-200 kHz and a max. current of 50 A at max. 220 V 50 Hz AC. Unit will be delivered with an individual calibration report but without further documentation except for a circuitry plan.

    Schwarzbeck JASO D 001- 94

     

    FMZB 1548 

    Magnetic field meter 9 kHz – 30 MHz, 20A/m, with separate power supply cable. Conditions: never used.

    2017-04-27_FMZB 1548

     

    HFRA 9150 (name change to HFRA 5150) 

    H-Field Transmit Loop VLF/HF, 100 W, dimensions: 0.6 m x 0.6 m, mounting support 3/8” camera thread, two BNC female Connectors, ext. termination 20 Watt 50 Ω included, antenna will be delivered with an individual calibration report. The technology is still up to date. We only have changed to circular antennas because the manufacturing process for circular shaped antennas is easier. This antenna is new and was the last square antenna we manufactured.

     

     Schwarzbeck HFRA 5149 Datasheet

     

    2017-04-27_HFRA 9150

     

     

    FMZB 1516 

    Loop antenna 9 kHz – 30 MHz, constant antenna factor of 20 dB(1/m), mains operated. The unit will be updated to the newest technical state of the art before delivery. Slight optical signs of wear. The technology is still up to date. We only have changed to circular antennas because the manufacturing process for circular shaped antennas is easier. Today’s replacement: FMZB 1519, FMZB 1513 Datasheet http://www.kilosense.com/schwarzbeck/k1516.pdf

    2017-04-27_FMZB 1516

     

    Amplifier Research 

    FP 2080 isotropic electric field probe 80 MHz – 40GHz, with 220V power adapter and transport case. You will get the items on the foto. We have no possibility to calibrate it. Multiple units available

    2017-04-27_Amplifier Research

     

    UBA 9116 

    VHF-UHF Biconical Broadband Antenna UBA 9116. Still manufactured unchanged, used unit with minor signs of wear. Datasheet: download/schwarzbeck/k9116.pdf

    2017-04-27_UBA 9116

     

    2x UHAP With Case 

    Set of UHF Precision Dipoles 300-1000 MHz Very good condition. Set also known as Rohde & Schwarz HZ13. Was only used for exhibitions.

    2017-04-27_2x UHAP with case

     

    VHA 9103 or VHAP Long Elements 

    Spare part for VHA 9103 or VHAP: long telescopic elements made of nickel plated brass (today’s version: stainless steel) 30 – 114 MHz. 2 units available.

    2017-04-27_VHA 9103

     

    VHA 9103 VHAP Short Elements 

    Spare part for VHA 9103 or VHAP: short telescopic element made of nickel plated brass (today’s version: stainless steel) 114 – 300 MHz, 1 unit available.

    2017-04-27_VHA 9103 VHAP Short

     

    IGU 2912 

    Calibration Pulse Generator for EMI-EMC applications. Pulse repetition frequency: 1-200(209) Hz, pulse shape: almost rectangular, pulse duration: 0.2 ns, pulse polarity: positive/negative (switchable), pulse level (CISPR weighting QP): 0-60 dBmikroVolt in 1dB steps. Max. output voltage across 50 Ohm: 80V – 110 V, unit will be calibrated before delivery.

    2017-04-27_IGU 2912

     

    LSME 1530 A 

    EMI receiver 10 – 150 kHz in 3 bands, QPdetector, unit will be calibrated before delivery. Easy to use robust and precise fully analog EMI receiver for Band A.

    2017-04-27_LSME 1530 A

     

    FSME 1515 

    EMI receiver 85 kHz – 30 MHz, QPDetector, built in pulse generator. The unit has minor cosmetic scratches and will be delivered with a new calibration certificate before delivery. Easy to use robust and precise fully analog EMI receiver for Band B.

    2017-04-27_FSME 1515

     

    VSME 1510B 

    EMI receiver 30-300 MHz, unit will be calibrated before delivery. Easy to use robust and precise fully analog EMI receiver for Band C.

    2017-04-27_VSME 1510B

     

    VUME 1520 A 

    EMI receiver 25 – 1000 MHz in 6 bands, QP-detector, unit will be calibrated before delivery. Signs of wear. Easy to use robust and precise fully analog EMI receiver for Band C and D.

    2017-04-27_VUME 1520 A

     

    FMLK 1518 without GPIB Interface 

    EMI-Receiver acc. CISPR 16-1, 9 kHz – 30 MHz, 3 Detectors: Quasipeak, Peak, Average, Attenuator with 1 dB steps, Protected Input, Automatic Calibration w. built-in Pulse Generator. No IEEE 488 Interface! The unit will be refurbished and calibrated before delivery. This unit has an extra battery pack.

    2017-04-27_FMLK 1518

     

    VUMA 1521 Without GPIB Interface 

    EMI-Receiver acc. CISPR 16-1, 25 MHz – 1 GHz, 3 Detectors: Quasipeak, Peak, Average, Attenuator with 1 dB steps, Protected Input, Automatic Calibration w. built-in Pulse Generator. No IEEE 488 Interface! The unit will be refurbished and calibrated before delivery.

    2017-04-27_VUMA 1521

     

    IGUF 2910 

    Battery driven High Power Pulse Generator, Pulse Repetition Frequency 300 Hz, weighted CISPR Level 80 dbµV (Quasipeak, 120 kHz IF-BW). Broad band signal source up to 300 (1000) MHz w. 0.5 ns Pulses of 300 V at 50 Ohm. With new NiMh battery and power supply. The unit will be calibrated before delivery. In very good conditions.

    2017-04-27_IGUF 2910

     

    Sucoflex 104 

    Coaxial cable Huber und Suhner Sucoflex 104, length 2 m, both sides PC3.5 plug, specified and calibrated up to 26.5 GHz, produced in 2004 but still in original unopened packaging with original calibration data. Several units available.

    2017-04-27_Sucoflex 104

     

    UTIFLEX UFB311A 

    Cable Assembly UFB311A, Ultra Low Loss, usable up to 18.0 GHz, with N-N male connectors, length=2 meters. Several units available. Delivered with a new calibration certificate.

    2017-04-27_UFB311A

     

    BBV 9718 With Option Battery And ALCS 

    Broadband Coaxial Preamplifier typ. 33 dB, 1 – 18 GHz with fixture for 22 mm antenna tube, and N to SMA cable, battery pack and charger. Will be furnished with a new calibration shortly before delivery. List price of all items more than Euro 3.000,00

    2017-04-27_BBV 9718

     

    Weinschel 6330-30-33 

    High power 30 dB attenuator, 100 Watts, DC-8 GHz, N(f/f). Strong signs of wear on paint, fully working with new calibration certificate. Several units available.

    2017-04-27_Weinschel 6330

     

    Weinschel Aeroflex Model 47- 10-34 

    10 dB attenuator 18 GHz 50 Watt. Never used in original package, with new individual calibration certificate. Datasheet: http://www.aeroflex.com/ams/weinschel/pdfiles/wmod47.pdf

    2017-04-27_Model 47- 10-34

     

    Weinschel 1426-4 

    High power coaxial termination, 50W DC-10 GHz, N(f/f). Very good condition. 1 unit available. Datasheet: http://weinschel.apitech.com/weinschel/pdfiles/wmod1426.pdf

    2017-04-27_1426-4

     

    Weinschel Aeroflex Model 1439-3 

    Weinschel Aeroflex 50 Ohm termination / dummy load 150 Watt with N-female connector, DC to 2.5 GHz, good cosmetical condition, fully working with individual VSWR calibration certificate. Datasheet: http://weinschel.apitech.com/weinschel/pdfiles/wmod1439.pdf

    2017-04-27_Model 1439-3

     

    VTSD 9561 D Or VTSD 9561 F 

    Diode pulse limiter with built-in 10 dB (VTSD 9561 F) or 20 dB (VTSD 9561 D) attenuator, DC-100 MHz. including new calibration certificate. Several units available. These are new products (last units produced with nickel plated brass housing. Today: milled aluminium housing.)

     

    MWB MesswandlerBau 

    Capacitive coupling clamp probably for EFT / Burst.

    2017-04-27_MWB MesswandlerBau

     

    EMCO 1060C 

    EMCO positioning controller 1085. On the back we also read model 1060C. The device can control turntable and mast via front panel operation or via GPIB. Powers up but as we have no possibility to test we offer a right to return within 30 days after the purchase

    2017-04-27_EMCO 1060C