INNCO Systems Product Catalog

innco systems GmbH

Parts

Model #

Product Description

Included

Antenna Mast

Mini Mast (MM)

MM 2000-PP

Electric Height Adjustment 1…2m, PP = Pneumatic Polarisation, Max. Load 6kg

80000168

MM 4000-PP

Electric Height Adjustment 1…4m, PP = Pneumatic Polarisation, Max. Load 6kg

80000073

Accessories

-MT

Manual Tilt – Bore Sight- Option

80000337

-MP

Optional Manual Polarisation

80004904

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Pneumatic Tube

12.5 meter

Reducing Valve (see figure)

1x

Power Cable

5 meter

Instruction Manual

1x

Antenna Mast (MA)

MA 2000-EP

Electric Height Adjustment 1…2m, EP = Electric Polarisation, Max. Load 10kg

80000273

MA 4000-EP

Electric Height Adjustment 1…4m, EP = Electric Polarisation, Max. Load 10kg

80000074

MA 6000-EP

Electric Height Adjustment 1…6m, EP = Electric Polarisation, Max. Load 10kg

80000075

Accessories

-O

OATS Version for MA Series

80000331

-PP

Optional Pneumatic Polarisation

80004906

-XP

Optional Pneumatic Polarisation by Internal Compressor

80005700

-MT

Optional Manual Tilt Bore Sight (only with -PP)

80000337

-HK

Hand Crank for Height Adjustment (without drive unit)

80004907

-15kg

Max. Antenna Load up to 15kg incl. CW5

80004908

-HS

Increases the maximum positioning (Antenna Mast Speed) from 13cm/s up to 25cm/s

80005233

-CISPR16

Antenna Rod Extend to 2m

80005111

Scope of Delivery

Type

Description

Fibre Optic Cable

2x 5 meter, 1x 10 meter

FSMA

4x

Power Cable

5 meter

Instruction Manual

1x

Bore Sight Antenna Mast

Antenna Mast (MA-XP-ET)

MA 4000-XP-ET

Electric Height Adjustment 1…4m, XP = Pneumatic Polarisation by Internal Compressor, (no compressed air needed), ET = Electric Tilt Adjustment, Max. Load 10kg

80000774

MA 4640-XP-ET

Antenna mast compliant with the CISPR 16-1-4 & ANSI 63.4
BORESIGHT requirements for using in EMC chambers for the remoted changing of
– scan height (electric)
– horizontal/vertical polarisation (electropneumatic)
– antenna tilt (electric)
Metal parts are located only in the base plate and the drive mechanism (max. 0.4 m above ground level). Limit switches and the general mechanical design provide a safe system operation.
The separate controlled motors support simultaneous movement with both independent changing of height and tilt and also an automatic but configurable link of both values (tilt while height change) if
driven by CO3000 controller.
Standard values:
Minimum Height: 1.0M OR IS IT 0.8M
scan height untilted 1.0…..4.64 m
max height of antenna when tilted approx 4.0 m (*)
total height 5.2 m
tilt angle -12….45°
max. load 10 kg
max.speed 12 cm/s
incl. fibre optic cable 2x5m, 1x10m + 4x FSMA
needed el.Power: 230V CEE7/4 or CEE7/7 Schuko socket
needed pneumtic: —- (none)
(*) relating to the ref.point of the antenna when its distance is 90cm to the mast tube (pole)

80006803

MA 4640-XP-ET-0800

Antenna Mast MA 4640-XP-ET-0800
Antenna mast compliant with the CISPR -1.918,80
16-1-4, ANSI 63.4 and ANSI64.10 (for FCC) BORESIGHT requirements for using in EMC chambers for the remoted changing of
– scan height (electric)
– horizontal/vertical polarisation (electropneumatic)
– antenna tilt (electric)
Metal parts are located only in the base plate and the drive mechanism (max. 0.4 m above ground level).
Limit switches and the general mechanical design provide a safe system operation.
The separate controlled motors support simultaneous movement with both independent changing of height and tilt and also an automatic but configurable link of both values (tilt while height change) if driven by CO3000 controller.
Standard values:
scan height untilted 0.8…..4.64 m
max height of antenna when tilted approx 4.0 m (*)
total height 5.2 m
tilt angle -12….45°
max. load 10 kg
max.speed 12 cm/s
incl. fibre optic cable 2x5m, 1x10m + 4x FSMA
needed el.Power: 230V CEE7/4 or CEE7/7 Schuko socket
needed pneumtic: —- (none)
(*) relating to the ref.point of the antenna when its distance is 90cm to the mast tube (pole)

80007055

MA 5000-XP-ET

Electric Height Adjustment 0.8…5m in non-boresight cond.,
approx..1…4m in boresight condition with long antenna XP = Pneumatic Polarisation by Internal Compressor, (no compressed air needed)
ET = Electric Tilt Adjustment, Max. Load 10kg

80000775

MA 6000-XP-ET

Electric Height Adjustment 1…6m,
XP = Pneumatic Polarisation by Internal Compressor, (no compressed air needed)
ET = Electric Tilt Adjustment, Max. Load 10kg

80005544

Accessories

-HS

Increases the maximum positioning (Antenna Mast Speed) from 13cm/s up to 25cm/s

80005233

-PP

No Integrated Compressor for MA-XP-ET

80004906

Scope of Delivery

Fibre Optic Cable

2x 5 meter, 1x 10 meter

FSMA

4x

Power Cable

5 meter

Instruction Manual

1x

Twin Mast (TW Series)

Antenna Mast (TW-PP-ET)

TW 4000-PP-ET

Electric Height Adjustment 1…4m, PP = Pneumatic Polarisation, ET = Electric Tilt Adjustment, Max. Load 15kg

80005683

TW 6000-PP-ET

Electric Height Adjustment 1…6m, PP = Pneumatic Polarisation, ET = Electric Tilt Adjustment, Max. Load 15kg

80000339

Accessories

-HS

Increases the maximum positioning (Antenna Mast Speed) from 13cm/s up to 25cm/s

80005233

-XP

Integrated Compressor for TW-PP

80002537

Scope of Delivery

Type

Description

Fibre Optic Cable

2x 5 meter, 1x 10 meter

FSMA

4x

Power Cable

5 meter

Pneumatic Tube

12.5 meter

Reducing Valve (see figure)

1x

Instruction Manual

1x

Antenna Stand – Manual Polarisation (MP)

Antenna Stand (AS-MP); max. Load 6kg

AS 1000-MP

Adjustable Height 0.7…1m, MP = Manual Polarisation

80000390

AS 1500-MP

Adjustable Height 0.7…1,5m, MP = Manual Polarisation

81000009

AS 2000-MP

Adjustable Height 0.7…2m, MP = Manual Polarisation

80000080

AS 2500-MP

Adjustable Height 0.7…2.5m, MP = Manual Polarisation

80000391

AS 4000-MP

Adjustable Height 0.7…4m, MP = Manual Polarisation

80000392

Accessories

-O

OATS Version for AS Series (only with –HK or –PP)

80004899

-PP

Optional Pneumatik Polarisation

80004900

-MT

Optional Manual Tilt-Bore-Sight

80000337

-HK

Hand Crank for Height Adjustment

80004901

-10kg

Stronger Version, Max. Antenna Load up to 10kg

80004902

-15kg

Stronger Version, Max. Antenna Load up to 15kg

80004903

CW5

Counter weight 5kg

80000135

Antenna Stand – Electrical Polarisation (EP)

Antenna Stand (AS-EP); max. Load 6kg

AS 1000-EP

Fix Height 1m, EP = Electrical Polarisation

80000159

AS 1500-EP

Fix Height 1.5m, EP = Electrical Polarisation 

80000083

AS 2000-EP

Fix Height 2m, EP = Electrical Polarisation

80000082

Accessories

-10kg

Stronger Version, Max Antenna Load up to 10kg

80004902

-H

Height Adjustable AS-EP Version

80005555

CW5

Counter weight 5kg

80000135

Antenna Stand – Pneumatic Polarisation (PP)

Antenna Stand (AS-PP); max. Load 6kg

AS 1500-PP

Adjustable Height 0.7…1.5m, PP = Pneumatic Polarisation

80006758

AS 2000-PP

Adjustable Height 0.7…2m, PP = Pneumatic Polarisation

80000082

AS 2500-PP

Adjustable Height 0.7…2.5m, PP = Pneumatic Polarisation

80001082

AS 3000-PP

Adjustable Height 0.7…3m, PP = Pneumatic Polarisation

80005556

Accessories

-10kg

Stronger Version, Max Antenna Load up to 10kg

80006757

CW5

Counter weight 5kg

80000135

Turntables

DS 1500-S-1t

Turndisc DS 1500-S-1t turntable for flush mounting into a raised floor, with stainless steel carrier plate, stainless steel environment and high efficient contacting with copper beryllium hollow core tube, equipped with shielded and radio interference suppressed compact drive.
Diameter 1.5 m, Load capability 1000 kg (2200 lbs), Min. Height 130 mm
Rotation speed tunable between:  min. 3 °/sec (0.5 rpm) and  max. 12 °/sec (2.0 rpm)
Turning range (standard) -200 … +400 °
Positioning accuracy better ± 0.2 °
Power supply in the centre: 2 x Schuko 230V / 16A: single-phase 1 x CEE 400V / 16A / 5pin
incl. Fibre optic cable 1 x 5 m,  1 x 10 m fibre cable,  2 x FSMA, Power cable 3 m with CEE 7/7 (German/French Schuko)  with filter included in the plug  counter socket also scope of delivery.

80005038

Low Profile Turntable with Stainless Steel Top Cover Plate (S Series)

Low Profile Turntable (Stainless Steel Cover Plate)

DS 1200-S

Ø 1200 mm, Height 130mm, 205mm CP

80000153

DS 1500-S

Ø 1500 mm, Height 130mm, 205mm CP

80000339

DS 2000-S

Ø 2000 mm, Height 141mm, 275mm CP

80000155

DS 2000-S-1t

Ø 2000 mm, Height 141mm, 275mm CP

80000156

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004873

-O

OATS Kit for DSXX00-S Series

80004874

-ER

Endless Turning (permanent positioning)

80004875

-kg

Higher Capacity for Turntable DS-S Series

80004876

-3rpm

Maximal Speed up to 3rpm

80004877

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

3 meter

Standard CP (see figure)

1x

Instruction Manual

1x

Low Profile Turntable with Wooden Top Cover Plate (-HE)

Low Profile Turntable (Wooden Top Cover Plate)

DS 1000-HA

Ø 1000 mm, Height 156mm, Load 200kg

80000146

DS 1200-HA

Ø 1200 mm, Height 156mm, Load 300kg

80000147

DS 1500-HA

Ø 1500 mm, Height 156mm, Load 500kg
Turndisc to «build-on» with low height -939,50 (standard: 156mm) and carrier plate made of laquered wood, compact drive unit in shielded and radio frequency suppressed housing with power input: Schuko plug on 5m ferrite lagged cable
signal input: FO connector with FSMA
Diameter 1.5 m
Load capability 500 kg (1100 lbs)
Min. Height 156 mm
rotating angle -200….+400 °
positioning accuracy better ± 0.5 °
rotation speed tunable between:
min. 3 °/sec (0.5 rpm)
max. 12 °/sec (2.0 rpm)
Connector panel to supply EUT/DUT
located (Standard) in the centre (fix)
equipped (Standard) 2 x CEE7/4 230V / 16A: single-phase (german Schuko), 1 x CEE 400V / 16A / 5pin
incl. Fibre optic cable set with 1 x 5m, 1 x 10m duplex cable, 2 x FSMA

80000148

DS 1500-HA Packaging

Wooden Crates for DS 1500-HA

91000001

DS 2000-HA

Ø 2000 mm, Height 156mm, Load 500kg

80000149

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004873

-O

OATS Kit for DSXX00-HA Series

80004874

-ER

Endless Turning (permanent positioning)

80004875

-kg

Higher Capacity for Turntable DS-HA Series

80004876

-3rpm

Maximal Speed up to 3rpm

80004877

movable DS-HA

movable execution of the Turndisc DS-HA by integrated Rollers.
Lifting/Lowering of the Turndisc central handwheel of the un-loaded Table.

80007083

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

3 meter

Standard CP (see figure)

1x

Instruction Manual

1x

Low Profile Turntable with Wooden Top Cover Plate (-HE)

Low Profile Turntable (Wooden Top Cover Plate)

DS 1200-HE

Ø 1200 mm, Height 156mm, Load 300kg

80000150

DS 1500-HE

Ø 1500 mm, Height 156mm, Load 500kg

80000151

DS 2000-HE

Ø 2000 mm, Height 156mm, Load 500kg

80000152

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004873

-O

OATS Kit for DSXX00-HE Series

80004874

-ER

Endless Turning (permanent positioning)

80004875

-kg

Higher Capacity for Turntable DS-HE Series

80004876

-3rpm

Maximal Speed up to 3rpm

80004877

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

3 meter

Standard CP (see figure)

1x

Instruction Manual

1x

High Load Turntables with Stainless Steel Top Cover Plate

High Load Turntable Diameter 2000 mm (Stainless Steel Cover Plate)

DT 2000-1t

Ø 2000mm, Height 250mm, Load 1t

80000045

DT 2000-1.5t

Ø 2000 mm, Height 300mm, Load 1.5t

80000046

DT 2000-2t

Ø 2000 mm, Height 300mm, Load 2t

80000047

DT 2000-2.5t

Ø 2000 mm, Height 300mm, Load 2.5t

80000455

High Load Turntable Diameter 2500 mm (Stainless Steel Cover Plate)

DT 2500-1t

Ø 2500 mm, Height 250mm, Load 1t

80000048

DT 2500-1.5t

Ø 2500 mm, Height 300mm, Load 1.5t

80000049

DT 2500-2t

Ø 2500 mm, Height 300mm, Load 2t

80000050

DT 2500-2.5t

Ø 2500 mm, Height 400mm, Load 3t

80000430

High Load Turntable Diameter 3000 mm (Stainless Steel Cover Plate)

DT 3000-1t

Ø 3000 mm, Height 350mm, Load 1t

80003852

DT 3000-1.5t

Ø 3000 mm, Height 400mm, Load 1.5t

80000345

DT 3000-2t

Ø 3000 mm, Height 400mm, Load 2t

80000051

DT 3000-3t

Ø 3000 mm, Height 400mm, Load 3t

80000052

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004886

-O

OATS Kit for DTXX00-S Series

80004887

-ER

Endless Turning (permanent positioning)

80004888

-EC

Energy Chain (No Cable Installation)

80004889

-SS

Limit Switch System

80004890

-t

Higher Capacity for Turntable DT-S Series

80004891

-CF

Cooling Fan for Airstream

80004892

-3rpm

Maximal Speed up to 3rpm

80004877

-IT-XX00

Integrated Turntable (Diameter)

80004894

-RPS

Preparation for RPS

80004895

-EG

Exhaust Gas System with 1 Connector on the Turntable

80004896

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

3 meter

Standard CP (see figure)

1x

Instruction Manual

1x

Turntables

PVC Turntables KT (Drive Unit in the Lower Region)

PVC Turntable KT

KT 1200

Ø 1200mm; Height 800mm; Max. Load 100kg

80004881

KT 1500

Ø 1500mm; Height 800mm; Max. Load 100kg

80004882

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004873

-ER

Endless Turning (permanent positioning)

80004875

-3rpm

Maximal Speed up to 3rpm

80004877

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

5 meter

Instruction Manual

1x

Compact Tables CT

CT 0500

Ø 500mm; Height 188mm; Max. Load 75kg

80005764

CT 0800

Ø 800mm; Height 188mm; Max. Load 75kg

80000138

CT 1000

Ø 1000mm; Height 188mm; Max. Load 75kg

80000296

CTE 0500

Ø 500mm; Height 700…1100mm; Max. Load 25kg

80005164

Accessories

-HP

High Precision Positioning (0.1 angular degree)

80004873

-ER

Endless Turning (permanent positioning)

80004875

-150kg

150kg Load Capacity for Turntable CT Series

80004880

-MV

Movable Version with Wheels instead of Stands

80500059

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

5 meter

Instruction Manual

1x

DDT 5000/1500-14t

Dual turntable DDT 5000/1500-14t

80007403

eccentrical dual turntable for flush mounting into a raised floor, with stainless steel carrier plates on galvanised steel structure, stainless steel environment and high efficient contacting with copper beryllium hollow core tube.
Both rotating areas are designed eccentrical and can be driven separately without any mechanical locking/unlocking.
In the controller both drives are shown and driven as separate units.
Rollers/castors build as non conductive type.

Reduced Height Option

Reduced height of the turntable to 18″ or 0.45m. Price is for special design and construction

80001214

Packing Charges

Packing charges for seaworthy packing in wooden crates

91000001

Controller and Hand Control Unit´s (HCU)

Controller for CO Devices

CO 3000-1D

CO3000 Controller for 1 Device

80005753

CO 3000-4p

CO3000 Controller for 4 Devices

80005688

CO 3000-8p

CO3000 Controller for 8 Devices

80005689

Update 3000

Update Controller CO 3000-1D to CO 3000-4p (license key will be provided)

80000354

Accessories Controller

HCU Basic Port

Connect Direct on the Backside of CO 3000 by Wire

80005053

HCU Direct Port

Connect Direct on the Backside of CO 3000 by Fibre Optic

80005618

Fibre Optic Cable´s

Fibre Optic Cables (POF Type)

001m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004913

002m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004914

003m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004915

004m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004916

005m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80000380

010m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80000379

015m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80000378

020m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004917

025m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004918

030m POF

Duplex Cable (Dual Lines) with Polymer Optical Fibre

80004919

Accessories

-O

Outdoor Protection (UV and Rodent Attack Resistant)

80004927

-FSMA

FSMA Connectors (1 Pair)

80000323

-FST

FST Connectors (1 Pair)

21000419

Positioning Systems

Cable Slide Rail (Slide Bar)

KMS 5300

Cable Slide Bar, Moving Area 5.3 meter, Clamp Trolley at 0.8 meter

80004994

KMS 5400

Cable Slide Bar, Moving Area 5.4 meter, Clamp Trolley at 0.8 meter

80006713

KMS 6000

Cable Slide Bar, Moving Area 6.0 meter, Clamp Trolley at 0.8 meter

80000351

KMS 6100

Cable Slide Bar, Moving Area 6.1 meter, Clamp Trolley at 0.8 meter

80000350

Scope of Delivery

Fibre Optic Cable

1x 5 meter, 1x 10 meter

FSMA

2x

Power Cable

5 meter

Integrated Roller & Stopper for Easy Storage an Setup

Un-lockable Clamp Trolley for Manual Movement of the Slider

Instruction Manual

1x

Accessories

Secondary Tray for Slide Bar

Secondary Tray for Slide Bar fiting for all commercially available mesuring clamps. Length of try: 620mm, Distance to primary tray 44mm

80004713

Positioning Systems

Field Probe Positioner (FSM)

FSM 1500-M

Manual Height Adjustment 0.5 … 1.5 meter, Load 2 kg

80004912

FSM 2300-M

Manual Height Adjustment 0.5 … 2.3 meter, Load 2 kg

80000089

FSM 2315

Electric Height Adjustment (Z Axis) 0.8 … 2.3 meter, Moving Area (Y Axis) 1.5 meter, Max. Load 2 kg

80002265

Scope of Delivery for FSM 2315

Fibre Optic Cable

2x 5 meter, 1x 10 meter

FSMA

4x

Power Cable

5 meter

High Adjustable Sensor Mount with ¼« – 20 Thread

Instruction Manual

1x

Positioning Systems

Mast Positioner (MP)

MP 1500

Moving Area max. 1.5 meter, Max. Load 80 kg, Max. Speed 50 mm/s

80006746

MP 2000

Moving Area max. 2.0 meter, Max. Load 80 kg, Max. Speed 50 mm/s

80002033

MP 2200

Moving range max. 2.2 meter, Max. Load 80 kg, Max. Speed 50 mm/sec

80005257

Scope of Delivery for MP

Fibre Optic Cable

1x 15 meter

Instruction Manual

1x

Positioning System

Turndevice (DE)

DE 3600-RH

Positioner for Cellular Phones, Load 2kg

80000145

DE 3700-RH

Positioner for Cellular Phones with Phantom Head, Load 5kg

80000144

DE 3800-RH

Positioner for Cellular Phones with Phantom Head, Load 15kg

80004897

DE 3330-RH

Positioner for Wiring Set with Small EUT, Load 4kg

80004986

Accessories

-HP

High Precision Positioning (0,1°)

80004898

Cellular Phone, Antenna and DUT Holder for DE Series 3600-RH

Holder 36-1

Universal Horizontal Mobile Phone Holder L=240 with Longhole

80004940

Holder 36-2

Universal Vertical Customer Holder with Longhole

80004941

Holder 36-3

Horizontal Mobile Phone Holder L=140 with Longhole

80004942

Holder 36-4

Horizontal Mobile Phone Holder L=450 with Longhole

80004943

Holder 36-5

Horizontal Mobile Phone Holder L=200 with Longhole

80004943

Holder 36-6

Horizontal Mobile Phone and Clamp Holder L=300 with Longhole

80004944

Holder 36-7

Universal Vertical Phantom Handholder with Longhole

80004945

Holder 36-8

Universal Horizontal Mobile Phone Holder L=200 with Longhole

80004947

Cellular Phone, Laptop and DUT Holder for DE Series 3700-RH

Holder 37-0

Mounting Adapter for Customer Holder

80003799

Holder 37-1

Standard Mobile Phone Holder (Horizontal)

80003701

Holder 37-2

Universal Vertical Mounting Plate

80003702

Holder 37-3

Universal Plate with Mobile Phone Holder and Rotary Joint

80003703

Holder 37-4

Laptop Mounting Plate 1000×500 mm (Rohacell)

80003704

Holder 37-5

Laptop Mounting Plate 500×500 mm (Rohacell)

80003705

Holder 37-6

Laptop Mounting Plate 800×500 mm (Rohacell)

80004946

Cellular Phone, Laptop and DUT Holder for DE Series 3800-RH

Holder 38-1

Universal Base Mounting Plate

80005101

Holder 38-2

Standard SAM HEAD Holder

80005102

Holder 38-3

Standard Mobile Phone Holder (Fix Height)

80005103

Holder 38-4

Mobile Phone Holder (Adjustable Height)

80005104

Holder 38-5

Laptop Mounting Plate 580×800 mm

80005105

Non Conductive EUT Test Tables

Plastic Tables (PT) ; Table Height 0.8 m

Plastic Tables Material: Styrofoam (PT)

PT 1208-SD

Material: Styrofoam, 1.2 x 0.8 m

80009472

PT 1410-SD

Material: Styrofoam, 1.4 x 1.0 m

80003972

PT 1500-SD

Material: Styrofoam, Diameter 1.5 m

80005270

PT 1512-SD

Material: Styrofoam, 1.5 x 1.2 m

80005279

PT 1810-SD

Material: Styrofoam, 1.8 x 1.0 m

80005261

Accessories

-PTP

Pertinax Top Plate, t=1mm

31000319

-HL

Higher Load for PT-SD

Plastic Tables Material: Rohacell (PT)

PT 1007-RH

Material: Rohacell, 1.0 x 0.7 m

80005750

PT 1208-RH

Material: Rohacell, 1.2 x 0.8 m

80005295

PT 1510-RH

Material: Rohacell, 1.5 x 1.0 m

80005749

PT 1512-RH

Material: Rohacell, 1.5 x 1.2 m

80005553

PT 1810-RH

Material: Rohacell, 1.8 x 1.0 m

80005580

PT 2510-RH

Material: Rohacell, 2.5 x 1.0 m

80005550

Accessories

-PTP

Pertinax Top Plate, t=1mm

31000319

-HL

Higher Load for PT-SD