AFJ PRODUCT LINE
RELIANT EMC PRODUCT LINES
· Absorbers
· Amplifiers
· Analyzers
· Antennas
· Antenna Masts & Adapters
· Attenuators
· CDN
· Cells & Chambers
· Clamps
· Comparison Noise Emitters
· Coaxial Cables
· Current Transformers
· Drone Detection Systems
· Dummy Lamps
· Emission Reference Source
· Environmental Chambers
· ESD Simulators
· Filter Design Kit
· Filters
· Generators
· GPS Logger
· ISN Networks
· LISN
· Meters
· Power Supplies
· Probes
· Receivers
· Software
· Striplines
· Synthesizers
· Test Systems
· York Reference Source
· Data Sheets
MANUFACTURERS
· Aaronia – Antennas and Probes
· AFJ Instruments – EMI Receivers and Click Analyzer
· A-INFO – Horn Antennas up to 325GHz
· CPI – TWT RF Power Amplifiers
· DANA – AC/DC Linear Power Supplies
· EMCIS – Filter Design Products
· EMC Pioneer – Absorbers, System Level EMI Filters
· EMC Test Design – Field Probes
· Empower RF Systems – Amplifiers
· Eurofins York – Comb and Noise Generators
· Exodus Advanced Communications Power Amplifiers
· Frankonia – Anechoic Chambers
· GTEM Italia – GTEM, TEM and Open GTEM Cells
· HILO-TEST – Immunity Test Systems
· innco systems – Positioning Systems for EMC
· Kapteos – Vector Electric Field Probes
· Laplace Instruments – Emission and Immunity Testing · LUMILOOP – Fiber Optic Power & Data
· Microrad – Probes and Meters
· mk-messtechnik – EMC Cameras
· OnFILTER – EMI Filters
· Pearson Electronics – Precision Current-monitoring Transformers
· PMI – RF Power Amplifiers
· Preen – Switched AC/DC Power Supplies
· Rohde & Schwarz – Receivers, Amplifiers, Signal Generators
· Sanwood – Environmental Test Chambers
· Schlöder – EMC Test and Measurement Systems
· Schwarzbeck Mess Elektronik – Antennas
· Seibersdorf Laboratories – Site & Chamber Validation
· Select Fabricators – Fabric RF/ EMI Enclosures
· SPINNER Group – Attenuators
· Spitzenberger & Spies – Linear Amplifiers
Request a Quote / Contact Us!
EXTERNAL SWITCHING OPERATIONS BOX
AFJ offers two Switching Boxes to be used in connection with the AFJ DDA55 click analyzer and any LISN for the measurement of line bound interference’s according to CISPR 14-1 and CISPR 16-1.
The two SW04 Modes are:
1. SW04/32 In=32A
2. SW04/100 In=100A
AFJ SW04 CISPR 14-1 Switching Box Front
AFJ SW04 CISPR 14-1 Switching Box Back
The AFJ SW04 CISPR 14-1 Switching Box is used in connection with the AFJ DDA55 click analyzer and any LISN brand for the measurement of line bound interference’s according to CISPR 14-1 and CISPR 16-1.
The SW04 CISPR 14-1 Switching Box uses air coils in the current path in order to avoid saturation effects with high current strengths. The continuous current load-bearing capacity is ensured by the use of large wire cross-sections for the coils. For a short period (10 minutes), twice as high currents are admissible.
The SW04 is available in two models, up to 100A three phases:
1. SW04/32 In=32A
2. SW04/100 In=100A
TECHNICAL SPECIFICATIONS:Number of lines: 3 or 4 (L1, L2, L3, N)
Max. rated current: 32A, or 100A each line
AC line voltage: N – Lx 250Vac or 380Vac
Operating power supply: 110 or 220 or 380Vac 50/60Hz
Power consumption: Max. 50VA
Interface: DB15 and AFJ DDA55 dedicated
GENERAL DATA:
Rated temperature: 0°C to 45°C
Storage temperature: -20°C to +70°C
SW04/32: 510 X 340 X 180 mm Dimensions (W x L x H)
SW04/100: 510 X 340 X 360 mm (two units)
Weight
SW04/32: 2.7kg
SW04/100: 10kg
AFJ DDA55 to AFJ SW04 to LISN to EUT Setup
