RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
STANDARDS
- ISPR Standards
- EN Standards Emissions- European Standards concerning Emissions
- EN Standards Immunity – European Standards concerning Immunity
- IEC Standards
- ISO Standards
- Military Standards
- USA (FCC, etc.) Standards
- VDE Standards
| STANDARDS | DESCRIPTION OF THE STANDARD | PRODUCTS REQUIRED FOR THE STANDARD |
| DC STANDARDS | ||
| DC 1014 | Schlöder MGA 1030 | |
| DC-11224 | Schlöder MGA 1030 | |
| FNN Standards | ||
| FNN Guide 3.7.1 | Schlöder PG 01-2000 | |
| NAMUR Standards | ||
| NAMUR | Schlöder CDG 6000 | |
| PSA Standards | ||
| PSA B217110 | Schlöder MGA 1030 | |
| IEEE 644 | Schlöder CAL 1250 | |
| EN 13763-13 | Schlöder SESD 3000 | |
| EN 55103-1 | Schlöder MGA 1030 | |
| EN 55103-2 | Schlöder MGA 1030 | |
| IEC Standards | ||
| IEC 60255 | Schlöder PGA 1240 | |
| IEC/TR EN 61000-1-1 | Electromagnetic compatibility (EMC) Part 1: General – Section 1: Application and interpretation of fundamental definitions and terms |
|
| IEC/TR EN 61000-2-1 | Electromagnetic compatibility (EMC) Part 2: Environment – Section 1: Description of the environment – Electromagnetic environment for low-frequency conducted disturbances and signaling in public power supply systems |
|
| IEC/TR EN 61000-3-2 | Electromagnetic compatibility (EMC) Part 3-2 – Limits Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
• Laplace Instruments Clean Power Source • Laplace Instruments Harmonic and Flicker Analyzer |
| IEC/TR EN 61000-3-3 | Electromagnetic compatibility (EMC) Part 3-3 – Limits Limits for voltage fluctuation and flicker (equipment input current ≤ 16 A per phase) |
• Laplace Instruments Harmonic and Flicker Analyzer |
| IEC/TR EN 61000-3-4 | Electromagnetic compatibility (EMC) Part 3-4: Limits Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
|
| IEC/TR EN 61000-3-5 | Electromagnetic compatibility (EMC)
|
|
| IEC/TR EN 61000-4-2 | Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test |
|
| IEC/TR EN 61000-4-3 | Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test |
• Laplace Instruments Broadband Antennas • Laplace Instruments LaplaCell |
| IEC/TR EN 61000-4-4 | Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test |
|
| IEC/TR EN 61000-4-5 | Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test |
Schloder CWG 1500 |
| IEC/TR EN 61000-4-6 | Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields |
• Laplace Instruments Coupler/De coupler (CDN) • Laplace Instruments RF Amplifiers |
| IEC/TR EN 61000-4-7 | Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
• Broadband Antennas
|
| IEC/TR EN 61000-4-8 | Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques Power frequency magnetic field immunity test |
Schloder MGA 1030 |
| IEC/TR EN 61000-4-9 | Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques Pulse magnetic field immunity test |
|
| IEC / EN 61000-4-11 | Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests |
• Schloder VIS 1700 |
| IEC / EN 61000-4-16 | • Schloder PGA 1240 | |
| IEC / EN 61000-4-19 | • Schloder PGA 1240 | |
| IEC / EN 61000-4-29 | d.c. voltage variation | Schloder VIS 1700 |
| IEC/TR EN 61000-6-1 | Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and light-industrial environments Intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered |
• AC Filters • Broadband Antennas • Coupler/De coupler (CDN) • LaplaCell • LETIS • Radiated Antenna • RF Amplifiers • RF Synthesizer |
| IEC/TR EN 61000-6-2 | Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments – intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered |
• AC Filters • Broadband Antennas • Coupler/De coupler (CDN) • LaplaCell • LETIS • Radiated Antenna • RF Amplifiers • RF Synthesizer |
| IEC/TR EN 61000-6-3 | Electromagnetic compatibility (EMC)
|
|
| IEC/TR EN 61000-6-4 | Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments |
|
| IEC 61010-1, Ed.3 | Schloder CWG 1500 | |
| IEC 60512-23-3 | Line Injection Method (frequency domain) |
|
| IEC 62153-4-6: 2006 | Line Injection Method (frequency domain) |
|
| IEC 96-1 Amendment 2 1993-06 section A.5.6 | Line Injection Method
|
|
| EN50081-1 | European Generic emission standard
|
|
| EN50081-2 | European Generic emission standard
|
|
| EN50082-1 | European immunity standard
|
AC Filters Broadband Antennas Coupler/De coupler (CDN) LaplaCell LETIS Radiated Antenna RF Amplifiers RF Synthesizer |
| EN50082-2 | European immunity standard
|
AC Filters Broadband Antennas Coupler/De coupler (CDN) LaplaCell LETIS Radiated Antenna RF Amplifiers RF Synthesizer |
| EN55011 |
European limits and methods of measurement of radio disturbance characteristics for scientific and medical equipment
|
Emissions Reference Source (ERS)
|
| EN55013 |
European limits and methods of measurement of radio disturbance characteristics of broadcast receivers
|
|
| EN55014 |
European limits and methods of measurement of radio disturbance characteristics of household appliances and power tools, replaced by EN55014-1, and immunity part is covered by EN55014-2
|
Emissions Reference Source (ERS)
|
| EN55015 |
European limits and methods of measurement of radio disturbance characteristics of fluorescent lamps
|
Radiated Spectrum Analyzer
|
| EN55022 |
European limits and methods of measurement of radio disturbance characteristics of information technology equipment
|
Emissions Reference Source (ERS)
|
| EN55025 |
Radio disturbance characteristics for the protection receivers used on board vehicles, boats, and on devices
|
|
| EN60555 part 2 & part 3 |
Disturbances of power supply network (part 2) and power fluctuations (part 3) caused by of household appliances and power tools
|
|
| EN 50289-1-6 | Line injection method |
|
| EN 2591-212 | Line injection method |
|
| EN13309 | Construction Machinery – Electromagnetic compatibility of machines with internal electrical power supplies |
|
| EN 50147.1 | Shielded room attenuation | Comb Generator
|
| EN 6100-3-2 | Harmonic | Spitzenberger Spies
|
| EN 6100-3-12 | Harmonic | Spitzenberger Spies
|
| EN 6100-3-11 | Flicker | Spitzenberger Spies
|
| EN 61000-4-11 | Voltage variation | |
| EN 61000-4-13 | Harmonics | |
| EN 61000-4-14 | Voltage fluctuation | |
| EN 61000-4-17 | Ripple on d.c. supply | |
| EN 61000-4-27 | Unbalance | |
| EN 61000-4-28 | Frequency variation | |
| EN 61000-4-29 | d.c. voltage variation | Schloder VIS 1700 |
| EN 6100-3-11 | Flicker | Spitzenberger Spies
|
| VDE STANDARDS | ||
| VDE 0875 |
German EMC directive for broadband interference generated by household appliances
|
|
| VDE 0871 |
German EMC directive for broadband and narrow band interference generated by information technology equipment
|
|
|
|
||
| ISO 7637 | Road vehicles — Electrical disturbances from conduction and coupling | |
| ISO 10605 Automotive | Schloder SESD 3000 | |
| ISO 11451-1 | Road vehicles
|
|
| ISO 11451-2 | Road vehicles
|
|
| ISO 11451-3 | Road vehicles
|
|
| ISO 11451-4 | Road vehicles – Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy
|
|
| ISO 11452-8 | Schloder MGA 1030 | |
Road vehicles
|
||
| ISO 13766 | Earthmoving Machinery
|
|
| ISO 14982 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
|
| ISO 16759-2 | ||
| ISO/CD 21848.5 | ||
| SAE J 1113-2 | Schloder MGA 1030 | |
| SAE J 1113-22 | Schloder MGA 1030 | |
| SAE J 1113-11 |
|
|
|
|
||
| CISPR 11 |
Industrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic disturbance characteristics Limits and methods of measurement
|
AC Filters
|
| CISPR 12 | Vehicles, boats and internal combustion engine driven devices
|
|
| CISPR 14-1 | Electromagnetic compatibility
|
• AC Filters • AFJ Instruments SW04 CISPR-14-1 External Switching Operations Box |
| CISPR 14-2 | Electromagnetic compatibility Part 2: Immunity – Product family standard Requirements for household appliances, electric tools and similar apparatus |
|
| CISPR 15 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
|
Pre-Selectors for EMC test Radiated Spectrum Analyzer RF Pre-Amplifier RF300 Large Loop Antenna |
| CISPR 16-1-1 | Specification for radio disturbance and immunity measurement apparatus and methods Part 1: Radio disturbance and immunity measuring apparatus |
|
| CISPR 16-1-2 | Specification for radio disturbance and immunity measurement apparatus and methods Part 2: Methods of measurement of disturbances and immunity |
|
| CISPR 16-3 | Specification for radio disturbance and immunity measurement apparatus and methods Part 3: Reports and recommendations of CISPR |
Standard for EMC Test Equipment |
| CISPR 16-4 | Part 4-1: Uncertainties, statistics and limit modeling Uncertainties in-standardized EMC tests |
Standard for EMC Test Equipment |
| CISPR 22 | Information technology equipment
|
AC Filters |
| CISPR 24 | Information technology equipment Immunity characteristics Limits and methods of measurement |
|
| CISPR 25 | Vehicles, boats and internal combustion engines – Radio disturbance characteristics Limits and methods of measurement for the protection of on-board receivers |
DC Filters
|
|
|
||
| EN50082 Part 1 | European immunity standard
|
AC Filters
|
| EN50082 Part 2 | European immunity standard, part2: industrial environment
|
AC Filters
|
| EN50093 | European
|
|
| EN55020 | European
|
AC Filters
|
| EN55024 | European
|
AC Filters
|
| EN55101 |
older draft of immunity requirements for information technology equipment Replaced by EN55024
|
|
| EN50081 Part 1 | European Generic emission standard
|
|
| EN50081 Part 2 | European immunity requirements for information technology equipment, replaced by EN61000-6-4 | |
|
|
||
| FCC Part 15 Class A | Subpart A contains a general provision that
|
AC Filters
|
| FCC Part 15 Class B |
US limits and methods of measurement of radio disturbance, measuring radio waves accidentally emitted from devices not specifically designed to emit radio waves («unintentional»), both directly («radiated») and indirectly («conducted»)
|
AC Filters
|
| GR-1089-CORE | Electromagnetic Compatibility and Electrical Safety Generic Criteria for Network Telecommunications Equipment |
|
| ASTM – D4935 | Electromagnetic Shielding Effectiveness of Planar Materials over frequency range 30-1500MHz | Comb Generator
|
|
|
||
| MIL-STD-461 E/F RS 101, CS 101 | Schlöder MGA 1030 | |
| MIL-STD-461 E/F RE 101, CE 101 | Schlöder MGA 1030 | |
| MIL-STD-461E |
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment
|
|
| MIL-STD-462D |
Measurement of Radio Frequency Spectrum Characteristics, Superseded by MIL-STD-461E
|
|
| MIL-STD-464 |
Electromagnetic Environmental Effects Requirements for Systems
|
|
| MIL-STD-469 |
Radar Engineering Interface Requirements, Electromagnetic Compatibility Metric
|
|
| MIL-STD-1542B |
Electromagnetic Compatibility and Grounding Requirements for Space System Facilities
|
|
| Def-Std 59-41 | This Part of the Defense Standard describes the methods of test to be applied, and where appropriate the limits required to be met when measuring the electromagnetic compatibility of Man Worn, Man Portable Equipment for Ministry of Defense use |
|
| EIA-364-66A used by MIL-DTL-38999K | The method allows highly repeatable SE measurements at frequencies between 1GHz and 10GHz. | Comb Generator |
|
MIL STD vs. EU Standards References |
||
 Results Of Detailed Comparisons Of Individual EMC Requirements And Test Procedures Delineated In Major National And International Commercial Standards With Military Standard MIL-STD-461E |
||
| Engineering Guides of MIL STD vs. EU Standards | ||
|
Spitzenberger & Spies |
||
| Emission | ||
| Standard | Description | Necessary SPS Products |
| IEC/EN 61000-3-2 | Limits for harmonics on supply networks up to 16A | Basic EMC System |
| IEC/EN 61000-3-3 | Limits on voltage variations and flicker on supply networks up to 16A | Basic EMC System |
| IEC/EN 61000-3-11 | Limits on voltage variations and flicker on supply networks up to 75A | Basic EMC System |
| IEC/EN 61000-3-12 | Limits for harmonics on supply networks up to 75A | Basic EMC System |
| Immunity | ||
| IEC/EN 61000-4-4 | Immunity against fast transient signals – burst | |
| IEC/EN 61000-4-5 | Immunity against voltage pulses – surge | |
| IEC/EN 61000-4-8 | Immunity against magnetic fields with power line frequencies | |
| IEC/EN 61000-4-11 | Immunity against voltage dips, short interruptions and voltage variations | |
| IEC/EN 61000-4-13 | Harmonics and inter-harmonics including mains signaling at AC power port | |
| IEC/EN 61000-4-14 | Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase | |
| IEC/EN 61000-4-17 | Ripple on d.c. input power | |
| IEC/EN 61000-4-27 | Unbalance, immunity test | |
| IEC/EN 61000-4-28 | Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase | |
| IEC/EN 61000-4-29 | Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | |
| IEC/EN 61000-4-34 | Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase | |
| Solar | ||
| IEC/EN 50530 | Overall performance testing of solar inverters | PV Simulator PVS |
| IEC/EN 62116 | Test procedure of islanding prevention measures for utility-interconnected photo-voltaic inverters | PV Simulator PVS RLC Load Basic EMC System PRU Power recuperation unit |
| IEC/EN 60146-1-1 | Semiconductor converters – General requirements and line commutated converters | PV Simulator PVS |
| IEC/EN 61131-2 | Programmable controllers –. Part 2: Equipment requirements and tests | PV Simulator PVS |
| IEC/EN 61496-1 | Safety of machinery – Electro-sensitive protective equipment | PV Simulator PVS |
| Road vehicles | ||
| ISO 7637 | Road vehicles — Electrical disturbances from conduction and coupling | Automotive supply simulation system |
| ISO 16750-2 | Road vehicles—Environmental conditions and electrical testing for electrical and electronic equipment | Automotive supply simulation system |
| ISO 21848 | Road vehicles — Electrical and electronic equipment for a supply voltage of 42 V — Electrical loads | Automotive supply simulation system |
| BMW | GS 95002, GS 95003-2 | Automotive supply simulation system |
| Daimler Chrysler | DC-10615 | Automotive supply simulation system |
| Fiat | 9.90110 | Automotive supply simulation system |
| FORD CI 250 | FORD CI 250 | Schlöder PGA 1240 |
| Ford | EMC-CS-2009.1, ES-XW7T-1A278-AC | Automotive supply simulation system |
| Ford | EMC-CS-2009.1, ES-XW7T-1A278-AC | Schlöder MGA 1240 |
| GMW | GMW 3097 |
Automotive supply simulation system Schlöder MGA 1030
|