AARONIA PRODUCT LINE
Antennas
• 3D TRACKING ANTENNAS – ISOLOG SERIES
• Biconical Antennas – BicoLOG Series
• Directional Logarithmic Periodic Antennas From 380 MHZ – HyperLOG Series
• Directional Logarithmic Periodic Antennas From 680 MHZ HyperLOG Series
• EMC/EMI Antennas – HyperLOG Series
• HORN ANTENNAS- PowerLOT Series
• ISOTROPIC ANTENNAS – OmniLOG Series
• Magnetic Field Tracking Antennas – MDF Series
GPS Logger
Preamplifier
Probes – Active Differential & Near Field
Signal Generators
Spectrum Analyzers
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
AARONIA BROADBAND PRE-AMPLIFIERS
Aaronia Broadband Pre-Amplifiers
• Aaronia Low Noise Amplifier UBBV 0910 – 9kHz~6GHz
• Aaronia Bypass Amplifier UBBV 1060 BPA – 100MHz~6GHz
• Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20 – DC~20GHz
• Aaronia 40dB Broadband Preamplifier UBBV1 – 1MHz~1GHz
• Aaronia 40dB RF Broadband Preamplifier UBBV2 – 1MHz~10GHz
• Aaronia 25dB Low Frequency Amplifier UBBV-NF-25 – 1Hz~60MHz
• Aaronia 35dB Broadband Pre-amplifier UBBV-NF-35 – 1Hz~30MHz
Aaronia Low Noise Amplifier UBBV 0910 – 9kHz to 6GHz
Aaronia Low Noise Amplifier UBBV 0910
Low Noise Amplifier UBBV 0910 Ultra low noise pre-amplifier up to 6GHz. Works with any brand of Spectrum Analyzers. Directly fits to SPECTRAN Handheld Analyzer. Low noise of only 0,4dB and gain of typ. 22dB.
Technical data
• Frequency range: 9kHz to 6GHz (provides gain up to 10GHz)
• Noise: 0,4dB (typ.)! Gain: 22dB (typ.), see datasheet graph
• Max. power at RF input: +10dBm
• Max. power at RF output: +8dBm
• Saturation power: -12dBm (50 ohms)
• Input: 50 Ohm SMA (f)
• Output: 50 Ohm SMA (m)
• Weight: 146gr Dimensions: 81x61x29mm
• Warranty: 10 years
Highlights:
• ULTRA LOW NOISE OF ONLY 0,4dB!
• Suitable for any brand of
• Spectrum Analyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• VERY LONG RUNTIME UP TO 30 HOURS WITH A FULL CHARGE!
• Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Included in delivery
• UBBV 0910 RF Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection
• Detailed English manual (on CD)
• SMA tool
• Cleaning brush
Aaronia UBBV 0910 Series Broadband Pre-Amplifier Data Sheet
Aaronia Bypass Amplifier UBBV 1060 BPA – 100MHz to 6GHz
Aaronia Bypass Amplifier UBBV 1060 BPA
Bypass Amplifier UBBV 1060 BPA Low noise pre-amplifier with bypass-mode up to 6GHz. Works with any brand of Spectrum Analyzers. Adjust to weak or strong signals at the press of a button. 0,4dB Noise, typ. 23dB gain and +48dBm IP3.
Highlights:
• WITH BYPASS-MODE FOR STRONG SIGNALS!
• Suitable for any brand of Spectrum Analyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• LONG RUNTIME UP TO 8 HOURS WITH A FULL CHARGE!
• Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Technical data
• Frequency range: 100MHz to 6GHz
• Noise: 0,9dB (Bypass-Mode) / 1,4dB (Amp. ON)
• Gain: 23dB (typ.), see datasheet graph IP3: +34dBm (Amp. ON) / +48dBm (Bypass-Mode)
• Max. power at RF output: +21dBm
• Input: 50 Ohm SMA (f)
• Output: 50 Ohm SMA (m)
• Weight: 146gr
• Dimensions: 81x61x29mm
• Warranty: 10 years
Included in delivery
• UBBV 1060 BPA RF Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection
• Detailed English manual (on CD) SMA tool Cleaning brush
Aaronia UBBV 1060 Series Broadband Pre-Amplifier Data Sheet
Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20 – DC to 20GHz
Aaronia 15dB Ultra-Wideband Pre-amplifier UBBV DC20
15dB Ultra-Wideband Pre-amplifier UBBV DC20 The allround amplifier up to 20GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Very flat gain and unreached broadband performance.
Highlights:
• Suitable for any brand of
• SpectrumAnalyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• Integrated LiPo battery (up to 3,5h run time)
• Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Technical data
• Frequency range: DC to 20GHz
• Noise: 2,5dB (typ.)
• Gain: typ. 14dBi (graph see datasheet)
• Max. power at RF input: +15dBm
• Max. power at RF output: +16dBm
• Saturation power: 0dBm (50 ohms)
• Input: 50 Ohm SMA (f)
• Output: 50 Ohm SMA (m)
• Weight: 146gr
• Dimensions: 81x61x29mm
• Warranty: 10 years
Included in delivery
• UBBV DC20 RF Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection
• Detailed English manual (on CD)
• SMA tool
• Cleaning brush
Aaronia UBBV DC20 Series Broadband Pre-Amplifier Data Sheet
Aaronia 40dB Broadband Preamplifier UBBV1 – 1MHz to 1GHz
Aaronia 40dB Broadband Preamplifier UBBV1
40dB Broadband Preamplifier UBBV1 Low Noise Broadband Pre-Amplifier. Directly fits to any SPECTRAN. Also works with any other brand of Spectrum Analyzers. Offers o broad frequency range and increases the sensitivity by up to 40dB
Highlights:
• Suitable for any brand of Spectrum Analyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• Integrated LiPo battery (up to 3,5h run time)
• Integrated calibration data on EEprom (readout via integrated USB interface)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Technical data
• Frequency range: 1MHz to 1GHz
• Noise: 3,5dB (typ.)
• Gain: 40dB (typ.)
• Max. power at RF input: +15dBm
• Max. power at RF output: +15dBm
• Saturation power: -25dBm (50 ohms)
• Input: 50 Ohm SMA (f) Output: 50 Ohm SMA (m)
• Weight: 146gr
• Warranty: 10 years
Included in delivery
• UBBV1 EMC Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection*
• Detailed English manual (on CD)
• SMA tool Cleaning brush
• * If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).
Aaronia UBBV1 Series Broadband Pre-Amplifier Data Sheet
Aaronia 40dB RF Broadband Preamplifier UBBV2 – 1MHz to 10GHz
Aaronia 40dB RF Broadband Preamplifier UBBV2
40dB RF Broadband Preamplifier UBBV2 High-gain RF Pre-amplifier up to 10GHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Broadband RF sensitivity increase by up to 40dB.
Highlights:
• Suitable for any brand of Spectrum Analyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• Integrated LiPo battery (up to 3,5h run time)
• Integrated calibration data on EEprom (readout via integrated USB interface)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Technical data
• Frequency range: 1MHz to 10GHz (500kHz with 3dB difference)
• Noise: 3,5dB (typ.)
• Gain: 40dB (typ.) with «linear» fall off: 1MHz: 40dB; 3GHz: 37.5dB; 6GHz: 35dB; 8GHz: 25dB; 10GHz: 20dB
• Max. power at RF input: +15dBm
• Max. power at RF output: +15dBm
• Saturation power: -25dBm (50 ohms)
• Input: 50 Ohm SMA (f)
• Output: 50 Ohm SMA (m)
• Weight: 146gr
• Warranty: 10 years
Included in delivery
• UBBV2 RF Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection*
• Detailed English manual (on CD)
• SMA tool Cleaning brush
• * If ordered with a SPECTRAN, the preamplifier will be supplied without carrying case (delivery within SPECTRAN carry case).
Aaronia UBBV2 Series Broadband Pre-Amplifier Data Sheet
Aaronia 25dB Low Frequency Amplifier UBBV-NF-25 – 1Hz to 50MHz
Aaronia 25dB Low Frequency Amplifier UBBV-NF-25
25dB Low Frequency Amplifier UBBV-NF-25 Pre-amplifier up to 60MHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Specialized for the low frequency range (Hz / kHz / low MHz range).
Highlights:
• Suitable for any brand of Spectrum Analyzers or antennas
• Fits perfectly to any SPECTRAN (mounting brackets included)
• Runs with battery or external power supply
• Integrated LiPo battery (up to 3,5h run time)
• Integrated calibration data on EEprom (readout via integrated USB interface)
• Very thick (2mm) aluminum housing offering very good screening
• Includes international charger (110V/220V) and adapter
Technical data
• Frequency range: 1Hz to 50MHz (60MHz with -3dB bandwidth)
• Gain: 25dB (typ.)
• Max. input DC voltage: 10VDC
• Max. input AC voltage: 3V or 2.1V RMS
• Max. output power: +15dBm (50 Ohm)
• Input: High impedance (100 kOhm)
• SMA (f) Output: 50 Ohm SMA (m)
• Weight: 146gr
• Warranty: 10 years
Included in delivery
• UBBV-NF-25 Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection
• Detailed English manual (on CD)
• SMA tool
• Cleaning brush
Aaronia UBBV-NF-25 Series Broadband Pre-Amplifier Data Sheet
Aaronia 35dB Broadband Pre-amplifier UBBV-NF-35 – 1Hz to 30MHz
High-End Preamplifier up to 30MHz. Works with any brand of Spectrum Analyzers. Directly fits to any SPECTRAN. Specialized for ultralow frequency signals.
Highlights:
• Frequency range: 1Hz to 30MHz (35MHz with -3dB bandwidth)
• Gain: 35dB (typ.)
• Max. input DC voltage: 10VDC
• Max. input AC voltage: 3V or 2.1V RMS
• Max. output power: +10dBm (50 Ohm)
• Input: High impedance (100 kOhm)
• SMA (f) Output: 50 Ohm SMA (m)
• Weight: 146gr
• Warranty: 10 years
Included in delivery
• UBBV-NF-35 Broadband Preamplifier
• 2 mounting brackets for SPECTRAN
• LiPo-Battery (integrated)
• Battery charger and power supply incl. international adapter set
• Aluminum carrying case with foam protection
• Detailed English manual (on CD)
• SMA tool
• Cleaning brush
Aaronia UBBV-NF-35 Series Broadband Pre-Amplifier Data Sheet