DIAMOND ENGINEERING PRODUCT LINE
Antenna Measurement System & Products
• D6025 – 2-axis, 25lbs (11.5kg)
• D6050 – 2-axis, 25lbs (11.5kg)
• DAMS 5000/6000/7000- 2-axis, 10lbs (4.5kg) or 20lbs (9kg)
• DAMS 5100/6100/7100 – 2-axis, 150lbs (68kg)
• DAMS 5250/6250/7250 – 2-axis, 250lbs (113.5kg)
• DC402 – compact, 2-axis, 40lbs (18.15kg)
• DCP252 – 2-axis EL/AZ positioner for radar module calibration
Broadband Reference Horn Antennas
• Horn Antennas from Schwarzbeck Mess-Elektronik
• Horn Antennas from A-Info
Sofware
• DAMS Antenna Measurement Studio
• DAMS Microwave Simulator
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
DIAMOND ENGINEERING - D6050 - 2-axis, 25lbs (11.5kg)
ANTENNA MEASUREMENT SYSTEMS & PRODUCTS
The D6050 Series is a highly versatile multi-axis antenna measurement system suited for devices up to 25 pounds (11.5 kg). The non-metallic, belt-driven head provides a low-reflection environment ideal for electrically small or omni-directional antennas.
Key Features and Functions
• 2D & 3D Spherical Measurements (AZ over EL, EL over AZ, XYZ planes and more)
• Far Field Parameters (gain, beamwidth, efficiency, directivity, polarization, isolation, and more)
• OTA Measurements (TRP/TIS)
• Phase Center Measurements
• Spherical Near Field (optional)
Highlights
• Dual rotary joints
• Multiple configuration options
• Indexable mast offset up to 23” from center
• Non-metallic DUT mounting axis
• Ultra-high precision (up to 0.02º)
• Ideal for most antennas up to 25 pounds
What’s Included?
• The standard D6050 package features:
-
2-axis positioner
-
DAMS Antenna Measurement Studio
-
Precision RF cables
-
Precision dual rotary joints
-
DUT mounting hardware
-
Tools and documentation
-
3-year warranty
Dimensions
Footprint: |
24” x 24” (609 mm x 609 mm) |
Total Height: |
61.475” (1561.4 mm) |
Clearance Radius: |
35” (1320 mm) surrounding clearance required for full 360º rotation |
Total Weight: |
99 lbs (44.9 kg) |
Positioner
Turntable
Frequency Ranges (GHz): |
Coax: DC to 6, 18, 40, 50, or 67 GHz |
|
mmW: 50-75 (V-Band), 60-90 (E-Band) or 75-110 (W-Band) GHz |
Resolution: |
0.02º |
Drivetrain: |
Precision worm gear table with 1.8º stepper motor |
Gear Ratio: |
90:1 |
Movement Range: |
0-360º or ± 180º (re-indexable hardware limits) |
Slip Ring: |
12-channel slip ring (standard, other options available) |
Position Feedback: |
Optional encoder (default open loop, position tracked by software) |
Weight (positioner only): |
76 lbs (34.5 kg) with slide railsils) |
Positioner Max Speed: |
4 RPM (24º per second) |
AUT Mounting Options: ¹ |
24” (610 mm) diameter acrylic plate, 0.750” thick, 1/4”-20 hole array |
|
(M6 hole array available upon request) |
Through-bore Diameter: |
Standard: 1.4” (35.5 mm) |
|
mmW: 3.25” (82.5 mm) |
Weight Capacity: |
Centered: 150 lbs (45.5 kg); distributed: 250 lbs (113.6 kg) |
RF Rotary Joint: |
Precision (SMA, 2.92 mm, 2.4 mm, 1.85 mm or waveguide) |
Roll / Phi Axis
Frequency Ranges: |
Coax: DC to 6, 18, 40, 50, or 67 GHz |
|
mmW: 50-75 (V-Band), 60-90 (E-Band) or 75-110 (W-Band) GHz |
Resolution: |
0.05º |
Drivetrain: |
Belt driven with 1.8º stepper motor |
Gear Ratio: |
36:1 with precision planetary reducer |
Movement Range: |
360º continuous or ± 180º |
Positioner Max Speed: |
4 RPM (24º per second) |
Position Feedback: |
Optional encoder (default open loop, position tracked by software) |
Weight (mast only): |
22 lbs (10 kg) |
AUT Mounting Options: ¹ |
4.5” (115 mm) diameter PVC mounting plate with 10-32 hole array |
|
(Larger plate and/or M5 hole array available upon request) |
Through-bore Diameter: |
1.75” (44.5 mm) |
Weight Capacity: |
25 lbs (11.4 kg) |
Axial Moment Capacity: |
20 ft-lbs (27 Nm, 2.75 m-kg) |
Lateral Moment Capacity: |
10 ft-lbs (13.5 Nm, 1.35 m-kg) |
RF Rotary Joint: |
Precision (SMA, 2.92 mm, 2.4 mm, 1.85 mm or waveguide) |
Custom mounting solutions available upon request
Z-Axis
Movement travel: |
Up to 11” (279.5 mm) |
Drive Type: |
Precision ground C7 steel ball-screw |
Motor: |
NEMA 17 stepper motor (with manual control knob) |
Max speed: |
4 in/s (100 mm/s) |
Movement resolution: |
0.008” (0.2 mm) |
Minimum travel: |
0.008” (0.2 mm) |
Position feedback: |
None (default open loop, position tracked by software) |
Electrical & Communications
Controller type: |
Internal 3-axis microprocessor-based controller |
Resolution: |
Up to 1/32nd microstepping |
Motor current: |
3.125A per motor phase |
Cooling: |
24V fan |
Communication interface: |
9-pin D-Sub RS-232 (USB-to-Serial adapter included) |
Included cable length: |
10 feet (3 meters) |
Input voltage: |
24VDC 5A – 2.5 mm DC barrel connector |
Power supply: |
24VDC 5A, 110V / 220V input (included) |
Models
Unless otherwise specified, all standard model packages include the positioner, software, all RF components, AUT mounting hardware, and tools and documentation.
D6050-00 |
No RF Components |
D6050-06 |
6 GHz SMA RF Components |
D6050-18 |
18 GHz SMA RF Components |
D6050-40 |
40 GHz 2.92 mm RF Components |
D6050-50 |
50 GHz 2.4 mm RF Components |
D6050-67 |
67 GHz 1.85 mm RF Components |
D6050-75 |
50 to 75 GHz mmW V-Band RF Components |
D6050-90 |
60 to 90 GHz mmW E-Band RF Components |
D6050-110 |
75 to 110 GHz mmW W-Band RF Components |
D6050-MMW-CFX |
No RF components; configured with mounts for Copper Mountain FX series mmW adapters (up to 110 GHz) |
Options
OPT-SR |
12-channel slip ring (for unlimited 360º rotations) |
OPT-WGDH |
Worm-gear driven head |
OPT-AZ |
Automated linear Z-axis |
OPT-AZXY |
Automated linear Z- and X-axis with pseudo Y-axis |
OPT-ENC |
Encoder feedback capability |
DPA-PDK |
DAMS Platform Development Kit |
OPT-SMA |
Software maintenance agreement |
Accessories
DEPC-D |
Pre-configured PC (desktop) |
DEPC-L |
Pre-configured PC (laptop) |
DE-SIM |
DAMS Antenna & Network Simulator software add-on |
DPA-SW-N2F |
Spherical nearfield processing |
DPA-AUTOPOL |
18 GHz SPDT RF switch auto-polarizer with cables/adapters |
DPA-AUTOPOL-40 |
40 GHz SPDT RF switch auto-polarizer with cables/adapters |
DE-05xx |
Broadband reference horn 500 MHz to 18, 26, 30 or 40 GHz |
DE-07xx |
Broadband reference horn 700 MHz to 18, 26, 30 or 40 GHz |
Product documents
Diamond Engineering D6050 Series Multi Axis Positioner Data Sheet
Diamond Engineering D6050 Series Installation and Configuration Guide
DAMS Software Suite Users Manual and Setup Guide
Diamond Engineering DAMS Antenna Measurement Systems Guide
Part Drawings
Diamond Engineering D6050 24″ Turntable (SAE, standard) Diagram
Diamond Engineering D6050 24″ Turntable (Metric) Diagram
Diamond Engineering D6025 & D6050 Series 10″ Roll Plate Diagram