Seibersdorf Laboratories- POD 16 And POD 618 Precision Omnidirectional Dipoles Antennas

SEIBERSDORF PRODUCTS

Antennas
• PLA-R Precision Loop Antenna Receive
• PLA-SET Precision Loop Antenna Set For Site Validation
• POD 16 And POD 618 Precision Omnidirectional Dipoles Antennas
• PRD-Precision Reference Dipole
• PCD 3100 Precision Conical Dipole
• PCD 8250 – Precision Conical Dipole
Antenna Sets
• MS1 - Site VSWR Set
• MS2 - POD Antenna Set
• MS3 - MS1 Site VSWR Set without CalStan Software
• MS4 - Site VSWR Set - Automatic
• MS5 - PLA-Set for NSA validation
Antenna Site VSWR Positioners
CalStan 11.0 – RF Measurement Software
Comb Generators RefRad
Site Validation Services
• Absorber Return Loss - 200 MHz - 18 GHz
• ALSE – Absorber Lined Shielded Enclosure Measurements
• Ambient Noise Measurement
• Antenna Calibration Test Site Validation CISPR 16-1-5 30 MHz - 1 GHz
• Automotive Component Test Site Validation CISPR 25 150 KHz - 3 GHz
• Chamber FActor CENELEC R210-003 30 MHz - 1 GHz
• CTIA Ripple Test for Mobile Station 722 MHz - 2132.5 MHz
• CTIA Validation
• Field Uniformity Measurement
• Freespace VSWR Measurements
• NSA – Normalized Site Attenuation
• Shielding Effectiveness Measurement
• Site VSWR Measurement
• Table Influence
• Transmission Loss 1 Ghz - 40 Ghz

SEIBERSDORF LABORATORIES
Seibersdorf Laboratories Company
Seibersdorf Laboratories Data Sheets
Seibersdorf Laboratories Product List

Request a Quote / Contact Us!

POD 16 And POD 618 Antennas

POD 16 & POD 618 Precision Omnidirectional Dipoles Antennas
Precision Omnidirectional Dipoles 1 – 18 GHz
Seibersdorf Laboratories POD 16 & POD 618 Precision Omnidirectional Dipoles Antennas

The Precision Omnidirectional Dipoles POD 16 and POD 618 are fully compliant to CISPR 16-1-4 for site validation above 1 GHz.

The POD 16 and POD 618 are precision broadband dipole antennas with conically shaped radiation elements covered by an RF-transparent radome. This rugged construction enables excellent dipole-like radiation pattern up to 18 GHz.

Applications:
• Site validation
• Broadband field strength monitoring

Why is the POD Radiation Pattern Superior?
In the «Classical» biconical design the pattern is distorted (compared to the ideal dipole) in the region around the antenna feed cable.
The patented POD Antenna design avoids coupling with the feed cable and its pattern is close to the ideal dipole (see the Figures below)

Technical Data POD 16:
• Frequency Range 1 GHz – 6 GHz
• Beam width (3dB) > 65°
• H-Plane anisotropy < ± 0.8 dB
• Max. input power 30 dBm
• Connector type SMA

Technical Data POD 618:
• Frequency Range 6 GHz – 18 GHz
• Beam width (3dB) > 60°
• H-Plane anisotropy < ±0.8 dB
• Max. input power 30 dBm
• Connector type SMA

The diagram of the measured radiation pattern (for example POD 618 at 15 GHz) additionally shows the «forbidden area» in grey color as given in the standard.

Delivered with typical calibration data, transportation case and manual

Options available:
• Antenna stand designed for site validation measurements according to CISPR 16-1-4 requirements
• Accredited ÖKD calibration of radiation pattern and antenna factor (1° resolution, 1 GHz steps)
• RF-cables and transport cases

Seibersdorf Laboratories Antenna PCD Precision Conical Dipole Antenna Data Sheet