Seibersdorf Laboratories Shielding Effectiveness
Measurement Description
The Shielding Effectiveness (SE) is measured in accordance with:
Mil-Std. 285
NSA 65-6
EN 50147 1

Typical measurement frequencies are: 10 kHz, 100 kHz, 1 MHz, 10 MHz, 30 MHz, 100 MHz, 500 MHz, 1 GHz, 10 GHz, 18 GHz, 26.5 GHz and 40 GHz.
Any selection of these frequencies is possible, any other frequencies possible upon request.

The exact location of the test points will be defined together with the customer on site as it is necessary to have full access to all test points.

A leakage test at 433 MHz will be performed when requested at time of order.

Please nominate an assistant to our engineer for setting up the equipment and to handle ladders, tripods and the like.

Test equipment (calibrated spectrum analyzer, signal generator, calibrated power attenuators, suitable transmit and receive antennas, power amplifiers, pre-amplifiers, antenna masts (tripods) and RF-cables) can be provided upon request.

 Seibersdorf Laboratories Accredited re Calibration Service for EMC Test Sites Data Sheet

 Seibersdorf Laboratories RF Engineering Accredited Site Validation Data Sheet

 Seibersdorf Laboratories RF Site Validation Data Sheet