EUROFINS YORK PRODUCTS
• Comb Generator Emitter (CGE01)
• Comb Generator Emitter (CGE05)
• Comb Generator Emitter (CGE06)
Comparison Noise Generators
• Comparison Noise Emitter V (CNE V)
• Comparison Noise Emitter V+ (CNE V+)
• Comparison Noise Emitter VI (CNE VI)
Harmonic and Flicker Generator
• Harmonic and Flicker Generator (HFG01KIT01)
• Harmonic and Flicker Generator (HFG02KIT01)
York Reference Sources (YRS)
• York Reference Source (YRS01) Kits 01 & 02
• York Reference Source (YRS02) Kits 01 and 02
• York Reference Source (YRS03) Kits 01 and 02
• York Reference Source YRS Combination Kit
Eurofins York Data Sheets
Eurofins York Product List
RELIANT EMC PRODUCT LINES
Request a Quote / Contact Us!
EUROFINS YORK - CCC01KIT01- CABLE COUPLING CLAMP 01
The Cable Coupling Clamp (CCC01) has been designed by Eurofins York Ltd. (formerly York EMC Services Ltd) for the purpose of measuring the EMC properties of cables. It can be used to make repeatable measurements aimed at assessing the coupling and shielding effectiveness properties of a wide range of cables. The design is based on the details of the possible launcher arrangement, described in IEC 96-1 Amendment 2 1993-06 section A.5.6 Line Injection Method (frequency domain). It is also used in IEC 62153-4-6: 2006 and mandated for the line injection method in EN 50289-1-6.
|Fixed cable routes
|Repeatable layout of test and injection cables
|Cable injection assemblies
|Injection cable runs are supplied preassembled and fitted with
|ferrite common-mode chokes
|Supports a range of test cable sizes
|2.5mm, 5mm and 10mm aperture supports provided as
|standard. Cable dimensions up to 22mm x 13mm are possible
|with the user-machinable fitting accessories
|0.3m & 0.5m test lengths
|Base plate allows the injection assemblies to be mounted either
|for a 0.3m cable length (EN 50289-1-6) or the extended 0.5m
|length (IEC 96-1) for increased coupling distance
|Configurable injection conductor
|Self-adhesive copper tape, easily trimmed to the correct width
|required according to the circumference of the cable under test
|Easy connection to test system
|Injection cables are terminated in N-type connectors
The CCC01 is designed to allow easy positioning of the test and injection feed cables in accordance with the layout described in IEC 96-1 Amendment 2 1993-06.
The CCC01 is supplied with left- and right-hand injection assemblies. Each assembly comprises the conductive metal launchers used to align the cable-under-test with the injection feed cable, and comes supplied with the injection cable and its ferrite ring chokes already fitted. Each injection feed cable is fitted with N-type female connectors, for connection to the test system (for example a network analyzer or spectrum analyzer with tracking generator). Each assembly also features a supporting plastic cable guide for the cable-under-test, with space given for ferrite ring chokes to be fitted as per the test specification.
The metal launchers are supplied with three pairs of conductive fittings with aperture sizes of 2.5mm, 5mm and 10mm diameter. Corresponding non-metallic fittings for the cable-under-test supporting guide clamps are also provided. With these fittings, a range of cable diameters can be accommodated.
A non-metallic base plate is also supplied, which allows the launchers to be easily aligned to give a test-cable measurement length of either 0.3m (EN 50289-1-6) and 0.5m (IEC 96-1) as required.
Please note: the cable under test (CUT) and parts associated with its construction and any ferrite rings to be fitted to it are not supplied.
- Cable shielding effectiveness measurements as indicated by:
- IEC 96-1 Amendment 2 1993-06
- IEC 62153-4-6:2006
- EN 50289-1-6
- Investigation of cable coupling phenomena
|10 kHz to 1 GHz typical (usable to higher frequencies, depending on application)
|50 Ω N-type socket
|220mm × 880mm (0.5m test setting)
|220mm × 740mm (0.3m test setting)
|3 kg (typical excluding cable-under-test and any associated ferrites)
STANDARD ORDER KITS
|Standard CCC01 cable coupling clamp kit
|Kit of user-machinable blank fittings for custom cables