EUROFINS YORK PRODUCTS
• Comb Generator Emitter (CGE01)
• Comb Generator Emitter (CGE05)
• Comb Generator Emitter (CGE06)
Comparison Noise Generators
• Comparison Noise Emitter V (CNE V)
• Comparison Noise Emitter V+ (CNE V+)
• Comparison Noise Emitter VI (CNE VI)
Harmonic and Flicker Generator
• Harmonic and Flicker Generator (HFG01KIT01)
• Harmonic and Flicker Generator (HFG02KIT01)
York Reference Sources (YRS)
• York Reference Source (YRS01) Kits 01 & 02
• York Reference Source (YRS02) Kits 01 and 02
• York Reference Source (YRS03) Kits 01 and 02
• York Reference Source YRS Combination Kit
Company Overview
Eurofins York Data Sheets
Eurofins York Product List
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
EUROFINS YORK - Comb Generator Emitter - CGE03
The Eurofins York Comb Generator Emitter 03 (CGE03) is a compact, battery powered, reference signal source that generates a broadband conducted output up to 40 GHz.
When used as a verification reference source, the known output allows unknowns within systems or components to be measured or calculated.
The CGE03 is supplied with a 50 Ω 2.9 mm output connector for direct connection to conducted test systems, or to an external antenna in order to generate test fields for evaluating radiated emission test systems.
The CGE03 harmonic steps can be switched between 900 MHz and 1 GHz as standard, allowing more frequency points to be measured than is possible with a fixed frequency source.
Features:
• Stable output
– Repeatable measurements
• 900 MHz to 40 GHz output
– Applications across a broad frequency spectrum
– Applicable to harmonics of high frequency systems
• Compact and portable
– Comparisons between sites and environments
• Battery powered
– No power or interconnecting cables affecting measurements
Applications:
• Reference source for:
– Daily pre-test verification checks if required by the accreditation authorities
– Long term performance monitoring
– Spectrum analyser / receiver pre-checks
• Characterisation of filter performance
• Cable loss measurements
• Measuring amplifier gain and bandwidth
• Radiated measurement system validation and verification (requires an additional antenna)
• Inter-laboratory test programs
• Proficiency test programs
Specifications:
• Frequency range 900 MHz to 40 GHz direct connection into a 50 Ω system 1 GHz to 26 GHz radiated using the optional MCN02 antenna • Step size 900 MHz or 1 GHz switchable
• Output connector 50 Ω 2.9 mm socket
• Temperature stability <2 dB, at an ambient temperature of 15 °C to 35 °C
• Time stability Typically <1 dB over a 12 month period
• Dimensions:
– CGE03C with battery pack – 76 mm diameter × 96 mm (102 mm incl. connector)
– CGE03C without battery pack – 76 mm diameter × 50 mm (56 mm incl. connector)
• Weight Approx 750 g (including battery)
• Power supply
– 5 V 2 AHr battery pack
– External input 5.00 V ± 0.25 V, 500 mA
• Operating time 4 hours typical with a fully charged battery pack
• Indicators Mode 1; 900 MHz steps. Mode 2; 1 GHz steps, incorrect power supply voltage
Calibration Options:
• CAL15 Conducted output power, 0 GHz to 40 GHz, measured using a spectrum analyser
• CAL10 Radiated field strength, 1 GHz to 26 GHz, measured at 3 m in a FAR using a spectrum analyser (CGE03C with monocone antenna only)
Standard Kits:
CGE03KIT01 – Standard CGE03C comb generator emitter (conducted output) kit.
Parts included:
• CGE03C comb generator emitter with 2.9mm socket output connector
• CAL15 – Standard conducted output power measurement , 0GHz to 40GHZ
CGE03KIT02 – Standard CGE03C comb generator emitter (conducted and radiated ouput) kit.
• CGE03C comb gernerator emitter with 2.9mm socket output connector.
• MCN02 – detachable monocone antenna
• CAL15 – conducted output power measurement, 0 GHz to 40 GHz
ACCESORIES
MCN01 |
Detachable monocone antenna (1-18GHz optimum used with CGE01) |
||
BP01 |
5V 2AH detachable battery pack |
ASSOCIATED DOWNLOADS