EUROFINS YORK PRODUCTS
• Comb Generator Emitter (CGE01)
• Comb Generator Emitter (CGE05)
• Comb Generator Emitter (CGE06)
Comparison Noise Generators
• Comparison Noise Emitter V (CNE V)
• Comparison Noise Emitter V+ (CNE V+)
• Comparison Noise Emitter VI (CNE VI)
Harmonic and Flicker Generator
• Harmonic and Flicker Generator (HFG01KIT01)
• Harmonic and Flicker Generator (HFG02KIT01)
York Reference Sources (YRS)
• York Reference Source (YRS01) Kits 01 & 02
• York Reference Source (YRS02) Kits 01 and 02
• York Reference Source (YRS03) Kits 01 and 02
• York Reference Source YRS Combination Kit
Company Overview
Eurofins York Data Sheets
Eurofins York Product List
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
EUROFINS YORK - Comparison Noise Emitter - CNE VI
The CNE VI is the latest generation broadband noise source, capable of providing a continuous output from 30 Hz and 6 GHz. The stable output allows the CNE VI to be used as a general purpose reference source for characterizing and verifying both conducted and radiated test environments.
• Continuous broadband output
– Full spectrum measurements and analysis
• Stable output
– Repeatable measurements
• 30 Hz to 6 GHz output
– Applications across a broad frequency spectrum
• Compact and portable
– Comparisons between sites and environments
• Battery powered
– No power or interconnecting cable effects on measurements
The CNE VI is a broadband noise source that is capable of producing a continuous noise output within the 30 Hz to 6 GHz frequency range. The broadband nature of the output enables the observation of details within the spectrum that would be missed using a comb generator.
The CNE VI features two separate outputs; a 50Ω BNC connector for the 30 Hz to 30 MHz signal and a 50Ω N-type output connector for the 30 MHz to 6 GHz signal. For radiated operation, either output
can be attached to a selection of antennas available in a range of frequency coverage and types. An IEC 320 adapter is also available to provide a connection to LISN equipment, as well as an RJ11/RJ14/RJ25/RJ45 adapter for connection to telecoms ISNs.
The CNE VI is an ideal source for carrying out checks on Open Area Test Sites (OATS) and fully or semi-anechoic chambers. The CNE VI is compact and battery powered, allowing operation as an electrically small source, which minimizes the effect of the CNE VI itself when characterizing the electromagnetic environment. The CNE VI is housed in a metal enclosure so that it can be mounted in direct contact with a metal ground plane as may be required by some tests.
STANDARD ORDER KITS
| Part # | Description | Parts Included |
| CNEVKIT03 | Standard CNE V+ comparison continuous noise emitter kit with antenna |
|
| CNEVKIT04 | Enhanced CNE V+ comparison noise emitter kit with multiple antennas and LISN adapter |
|
ACCESORIES
| Accessory | Part # | Description |
| Antenna | TLM01 |
|
| Antenna | TLM02 | 30MHz to 300MHz (optimum) 290mm long top-loaded monopole |
| Antenna | MCN01 | 1GHz+ (optimum) monocone antenna |
| Direct coupler | LSA02 |
|
OUTPUT MEASUREMENT RESULTS
|
Type |
Order Nº |
Description |
|
Direct Output |
CAL01 |
0 to 5GHz power measurement using spectrum analyzer |
|
Radiated Output |
CAL02 |
30MHz to 1GHz horizontal and vertical polarization electric field-strength on OATS using receiver, either 3m or 10m |
|
Radiated Output |
CAL06 |
30MHz to 1GHz horizontal and vertical polarization electric field-strength in FAR using a spectrum analyzer at 3m |
All freight documentation for Repairs and Calibrations must include: “Import under IPR CPC 5100001 – Goods of UK origin returned for repair/calibration – Items are to be imported under IPR CPC 5100001 being goods of UK origin, temporarily returned for repair/recalibration”
ASSOCIATED DOWNLOADS
CNEVIKIT01 & CNEVIKIT02- Comparison Noise Emitter VI – Data Sheet