COM-POWER PRODUCTS
• Company Overview
• Absorbing Clamps
• Antenna Kits
• Antennas
• CDNs
• Comb Generators
• Current Probes
• EM Clamps
• Emissions System
• Immunity System
• ISNs
• LISN
• Magnetic Field Generator
• Masts
• Near Field Probes
• Power Amplifiers
• Preamplifiers
• Spectrum Analyzers
• Surge Generators
• System Controllers
• Telecom Analyzer
• Telecom Test System
• Transient Limiters
• Tripods
• Turntables
• Data Sheets
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
Com-Power APF-5060 Magnetic Field Generator
APF-5060 Power Frequency Magnetic Field Generator 50/60 Hz
Magnetic Field Generator for Immunity Testing per IEC 61000-4-8
The Com-Power APF-5060 magnetic field generator is specifically geared towards generating magnetic fields for immunity testing. The APF-5060 with its corresponding loop antennas provide a standalone solution for magnetic field immunity testing as per IEC/EN 61000-4-8 and all the derived product standards. Generate magnetic fields for immunity testing with a magnetic field generator.
Two shrouded banana sockets provide a convenient and safe means to connect the loop antenna. In addition to full, front panel operability, the APF-5060 can also be remotely controlled by a PC software via fiber optic interface cable. The required field is generated by APF-5060 by controlling the current based on the coil factor of loop connected to it. The software comes with pre-defined coil factors for all Com-Power loops and in addition the software allows the user to define coil factor thereby providing the versatility of generating the required field by using any loop antenna with a known coil factor.
The Com-Power APF-5060 magnetic field generator is specifically geared towards generating magnetic fields for immunity testing. The APF-5060 with its corresponding loop antennas provide a standalone solution for magnetic field immunity testing as per IEC/EN 61000-4-8 and all the derived product standards. Two shrouded banana sockets provide a convenient and safe means to connect the loop antenna. In addition to full, front panel operability, the APF-5060 can also be remotely controlled by a PC software via fiber optic interface cable. The required field is generated by APF-5060 by controlling the current based on the coil factor of loop connected to it. The software comes with pre-defined coil factors for all Com-Power loops and in addition the software allows the user to define coil factor thereby providing the versatility of generating the required field by using any loop antenna with a known coil factor.
Specifications:
Com-Power APF-5060 Power Frequency Magnetic Field Generator Data Sheet
Com-Power APF-5060 Power Frequency Magnetic Field Generator Manual