COM-POWER PRODUCTS
• Company Overview
• Absorbing Clamps
• Antenna Kits
• Antennas
• CDNs
• Comb Generators
• Current Probes
• EM Clamps
• Emissions System
• Immunity System
• ISNs
• LISN
• Magnetic Field Generator
• Masts
• Near Field Probes
• Power Amplifiers
• Preamplifiers
• Spectrum Analyzers
• Surge Generators
• System Controllers
• Telecom Analyzer
• Telecom Test System
• Transient Limiters
• Tripods
• Turntables
• Data Sheets
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
Com-Power Turntables
Automated and Manually Operated Turntables
AMTTC-300 Antenna Mast and Turntable Controller
Antenna Mast and Turntable Controller Com-Power model AMTTC-300 Antenna Mast / Turntable Controller provides fully automated control of Com-Power Antenna Mast & Turn Table.
Specifications:
-
· Channels: Up to three independent channels
-
· Channel Interface: Fiber Optic via Duplex VL (Avago duplex latching POF versatile link jack)
-
· Fiber Optic Cable: 10 Meter VL/VL duplex crossover POF (up to 30 mtr optional available)
-
· PC Interface: USB 2.0
-
· Operation Control: Front Panel or PC software
-
· Display: 16 x 2 Alphanumeric LCD
-
· Software Limit: Always displayed on front panel Can be turned on and off using front panel or PC software
-
· System Input Power: 100 – 250 Vac, 50 Hz / 60Hz (100 VA Max.)
-
Fuse Type: 1 Amps (T)
-
· Weight: 13 lbs (5.9 Kgs)
-
· Dimensions: ( H x W x D) 7.75” x 19” x 13.5” (19.7 x 48.3 x 34.3 cm) (excluding handles)
-
· Operating Temperature: 40°F to 104°F (5°C to 40°C)
Com-Power AMTTC-300 Antenna Mast and Turntable Controller Data Sheet
Com-Power AMTTC-300 Antenna Mast and Turntable Controller Manual
TTW-400, TTW-600 Turntables EMC Testing
Used for EMC Testing The TTW-400 and TTW-600 motorized wooden turntables are low profile, above ground circular testing platforms for rotating equipment under test (EUT) during commercial EMC testing. The turntable can support and rotate desktop or floor standing equipment. The equipment is rotated to identify the position or angle at which the EUT radiates the maximum electromagnetic interference. The turntable can be rotated clockwise or counter clockwise using the the remote switch. The rotation drive consist of motor and gear reduction drive. The table top is constructed using wood laminated with Formica to prevent absorption of moisture. Any optional ramp can be purchased with the turntable for loading heavy equipment on to the turntable.
Specification |
TTW-400 |
TTW-600 |
Table Diameter |
4 feet (1.2 meters) |
6 feet (1.8 meters) |
Table Height |
9 inches (23 cm) |
9 inches (23 cm) |
Load Rating |
1000 lbs. (455 kg) |
1000 lbs. (455 kg) |
Turntable RPM |
2.1 |
1.4 |
Power |
115 VAC, 60 Hz |
115 VAC, 60 Hz |
Remote Switch |
Reversing Drum |
Reversing Drum |
Extension Cable |
9.8 feet ( 3 meters) |
9.8 feet ( 3 meters) |
Table Weight |
149 lb (68 kg) |
172 lbs (78 kg) |
Com-Power TTW-400, TTW-600 Turntables EMC Testing Data Sheet
TTW-400A Turntables EMC Testing
Used for EMC Testing Com-Power model TTW-400A is a fully automated turntable which can be controlled through the Com-Power AMTTC-300 controller. The turntable is constructed from non-reflective wood material. It also has capability of manual control via toggle switch on the table’s motor box
Com-Power TTW-400, TTW-600 Turntables EMC Testing Data Sheet