COM-POWER PRODUCTS
• Company Overview
• Absorbing Clamps
• Antenna Kits
• Antennas
• CDNs
• Comb Generators
• Current Probes
• EM Clamps
• Emissions System
• Immunity System
• ISNs
• LISN
• Magnetic Field Generator
• Masts
• Near Field Probes
• Power Amplifiers
• Preamplifiers
• Spectrum Analyzers
• Surge Generators
• System Controllers
• Telecom Analyzer
• Telecom Test System
• Transient Limiters
• Tripods
• Turntables
• Data Sheets
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
Com-Power Antennas
Com-Power EMI / EMC broadband and tuned antennas cover the frequency range of 9 kHz – 40 GHz. Most electronic products are required meet the various international EMC regulatory standards before they are introduced to the market. Com-Power provides a wide range of EMI antennas and accessories.
• Active Loop Antenna AL-130R 9 kHz to 30 MHz
• Monopole Antenna AM-741R 9 kHz to 60 MHz
• Biconical Antennas
• • AB-900A Biconical Antenna 25 MHz to 300 MHz
• • ABF-900A Biconical Antenna 25 MHz to 300 MHz
• • ABM-6000 Microwave Biconical Antenna
• Hybrid Combilog Antenna AC-220• AD-100A Tuned Dipole Antenna Set
• Horn Antennas
• • AH-118 Double Ridge Horn Antenna
• • AH-220 Double Ridge Broadband Horn Antenna
• • AH-640 Standard Gain Horn Antenna
• • AH-8055 High Power Horn Broadband Antenna
• • AH-826 Standard Gain Horn Antenna
• • AH-840 18-40 GHz Passive Horn Antenna
• • AHA-118 Wide Band Active Horn Antenna
• • AHA-840 Double Ridge Active Horn Antenna
• Log Periodic Antennas
• • AL-100 Log Periodic Antenna
• • ALC-100 Compact Log Periodic Antenna
• • ALFM-80120 FM High Power Log Periodic Antenna
• • ALP-100 High Power Log Periodic Antenna
• Passive Loop Antennas
• • AL-RE101 Passive Loop Antenna for Mil-Std
• • AL-RS101-SET Mil-Std Loop Antenna Set
• ALT-930-2M Van Veen Triple Large Loop Antenna System
AL-130R Active Loop Antenna
AL-130R Active Loop Antenna 9 kHz to 30 MHz for emissions testing
The Model AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing.
Specifications:
· Product Name: Active Loop Antenna
· Frequency Range: 9 kHz to 30 MHz
· Loop Size: 19″ x 19″ (0.5 m x 0.5 m)
· Nominal Impedance: 50 Ω (output port)
· Battery Type: 6 VDC Ni-MH (rechargeable)
· Average Battery Life: 10 – 12 Hours
· E-Field Antenna Factors: 13.4 to 16.4 (average: 14-9) [dB(m-1)]
· Saturation Level: >1 V/m / >120dBμV/m (>2.65 mA/m) / >68.5 dBμA/m
· Antenna Factor Variation: ±1.5 dB RF
· Connector: BNC-type (female)
· Standards: ANSI C63.4, CISPR, EN, ETSI, etc.
· Dimensions (H x W x D): 20.1″ x 19.7″ x 10.6″ [51 x 50 x 27 cm]
· Weight: 5.5 lbs. [2.5 kg]
Com-Power AL-130R Active Loop Antenna 9 kHz to 30 MHz Data Sheet
Com-Power AL-130R Active Loop Antenna 9 kHz to 30 MHz Manual
AM-741R Monopole Antenna
AM-741R 9 kHz to 60 MHz Monopole Antenna
The 41 inch Monopole antenna is required for making electric field emission measurements below 60 MHz per Military standards (MIL-STD-461) and FAA (DO-160) specifications. This antenna is for emissions measurements only. It cannot be used for transmitting. The Active Monopole antenna is generally used in a shielded room or in a screen room, with the equipment under test (EUT) placed on a metal ground plane. The 41 inch rod and the ground plane behave electrically as though a mirror image of the rod were located below the ground, and the ground removed. Since the stainless steel plate does not have enough surface area to mirror the entire 41 inch rod, it is bonded to the surrounding ground plane during use. The AM-741 is battery powered to prevent measurement errors that maybe caused by external power cables. The ANSI equivalent capacitance substitution method (ECSM) is the recommended method for calibrating AM-741R monopole antenna. The individual calibration data will be included with each antenna.
Specifications:
· Product Name: Active Monopole Antenna
· Frequency Range: 9 kHz to 30 MHz (usable to 60 MHz)
· Polarization: Vertical
· Nominal Impedance: 50Ω (output port)
· Battery Type: 6 VDC Ni-MH (rechargeable)
· Average Battery Life: 10-12 hours (new, fully charged battery)
· Active Antenna Factors (typical): -1.2 to -0.3 (average: -0.5) [dB(m-1)] (9 kHz to 30 MHz)
· Antenna Factor Variation (maximum):
Com-Power AM-741R Monopole Antenna 9 kHz to 60 MHz Data Sheet
Com-Power AM-741R Monopole Antenna 9 kHz to 60 MHz Manual
AB-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 MHz
The Model AB-900A is used for emissions and immunity testing to meet various EMC standards. It has frequency range of 25 MHz to 300 MHz. The broadband characteristics of the biconical antenna makes it a good choice for making sweep measurements and for automated measurement systems.
Specifications:
· Frequency Range: 25 MHz to 300 MHz
· Polarization: Linear Nominal
· Impedance: 50 Ohm
· Power Handling: 50 Watts Continuos
· Connector: N-type(female)
· Standards: FCC, CISPR, EN, ETSI, FAA, MIL-STD 461, Automotive, etc
· Width: 52.75 in / 134 cm
· Dimensions (L x W x D): 51.5
Com-Power AB-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 Data Sheet
Com-Power AB-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 Manual
ABF-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 MHz
Flexible Biconical Antenna Biconical antenna model ABF-900A is used for emissions and immunity testing to meet various EMC standards. It has frequency range of 25 – 300 MHz. It has flexible and foldable conical elements for easy storage and transport.
Specifications:
· Frequency Range: 25 MHz-300 MHz
· Continuous input power: (CW): 50 Watts
· Polarization: Linear
· Impedance: 50 N)
· Connector: N (f)
· Width: 52.75 in / 134 cm
· Length: 28.75 in / 73 cm
· Weight: 10 lbs. (4.5 kg) max.
Com-Power ABF-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 Data Sheet
Com-Power ABF-900A Biconical Antenna for emissions and immunity testing 25 MHz to 300 Manual
ABM-6000 Microwave Biconical Antenna
The ABM-6000 Microwave Biconical antenna is specifically designed to be the transmit source antenna for test site validations above 1 GHz per the CISPR 16-1-4 Site Voltage Standing Wave Ratio (SVSWR) procedure.
Specifications:
· Antenna Type: Microwave Biconical
· Frequency Range: 1 to 6 GHz
· Antenna Factor: 32 to 46 dB/m
· Isotropic Gain: -3 to 4.5 dBi
· VSWR: 3:1 (average)
· 3 dB beam width: 75 to 95 degrees
· Impedance: 50 ohms (nominal)
· Inversion Symmetry: < 1 dB
· Cross-Polarization: > 20 dB rejection
· Overall length: 20.5″ (52 cm)
· Maximum Width (elements): 2.5 inches (63.5 mm)
· Connector Type: N-type (female) Max.
· Input Power: 50 Watts
· Weight: 13 oz. (0.358 kg)
Com-Power ABM-6000 Microwave Biconical Antenna Data Sheet
The AC-220 Hybrid Combilog Antenna is for EMC emission and immunity up to 2 GHz
The AC-220 Hybrid Combilog antenna is for EMC emission and immunity up to 2 GHz.. It combines the electrical properties of two antenna (biconical and Log ). It reduces overall testing time by 20 – 30% due to antenna switching. It is Optimized for emission measurements, but can handle up to 500 Watt CW, making it suitable for most immunity measurements . Each antenna is individually calibrated at 10 meters and the data included the purchase price.
Specifications:
· Product Name: Combilog Antenna
· Frequency Range:
20 MHz to 2 GHz (as receive antenna – emissions)
80 MHz to 2 GHz (as transmit antenna – immunity)
· Polarization: Linear
· Nominal Impedance: 50Ω
· Power Handling: (CW) 500 Watts (continuous)
· Connector: N-type (female)
· Antenna Factor: 6.2 to 27.7 (average: 16.9) [dB(m-1)]
· Isotropic Gain: -18.5 to 9.2 (average: 3.0) dBi
· VSWR: 1.06 to 3.93 (average: 1.78) :1
· Return Loss: 4.5 to 29.8 (average: 12.5) dB
· Specifications: FCC, CISPR, EN, ETSI, etc.
· Dimensions: (H x W x D) 50
Com-Power AC-220 Hybrid Combilog Antenna Data Sheet
Com-Power AC-220 Hybrid Combilog Antenna Manual
AD-100A Tuned Dipole Antenna Set
Specifications:
· Frequency Range:
Balun 1 (dB1): 30 MHz – 65 MHz
Balun 2 (dB2): 65 MHz – 175 MHz
Balun 3 (dB3): 175 MHz – 400 MHz
Balun 4 (dB4): 400 MHz – 1 GHz
· Polarization: Linear Nominal
· Impedance: 50 Ohm RF
· Connectors: BNC-type(female) Min.
· Element Length: 2.6 inches [6.6 cm]
· Max. Element Length: 114 inches [290 cm]
· Isotropic Gain: 1.6 dBi
· VSWR: less than 1.5:1
· Standards: ANSI, CISPR, EN, ETSI, etc.
· Weight: 15 lbs [6.8 kg] (including baluns, elements & case)
Com-Power AD-100A Tuned Dipole Antenna Set Data Sheet
Com-Power AD-100A Tuned Dipole Antenna Set Antenna Manual
AH-118 Double Ridge Horn Antenna 700 MHz to 18 GHz
Wide Band Double Ridge Horn Antenna 0.7 – 18 GHz
The Com-Power AH-118 is a double Ridge Guide broadband horn antenna that offer excellent performance over the frequency range of 700 MHz to 18 GHz. Most EMI test standards require the use of horn antenna for testing above 700 MHz. This Horn antenna is an excellent choice for both EMC radiated immunity and emissions testing.
Specifications:
· Frequency Range: 700 MHz – 18 GHz
· Power: 300 Watts continuous
· VSWR: 2.0 : 1
· Polarization: Linear
· Impedance: 50 Ω
· Connector type: N type (f)
· Weight: 4 lbs max.
· Size: 7.8” X 9.5” X 5.6” / 19.8 x 24.1 x 14.2 cm
Com-Power AH-118 Double Ridge Horn Antenna 700 MHz to 18 GHz Data Sheet
Com-Power AH-118 Double Ridge Horn Antenna 700 MHz to 18 GHz Manual
AH-220 Double Ridge Broadband Horn Antenna
MIL-STD Double Ridge Horn Antenna 800 Watts CW.
The AH-220 is a broadband, linearly polarized Double Ridge Waveguide Horn Antenna, operating over the frequency range of 200 MHz to 2 GHz. While it is designed to serve as the receiving antenna for radiated emissions tests between 200 MHz and 1 GHz, as specified within RE102 of MIL-STD-461, it can also be used as a transmitting antenna for radiated immunity tests.
Specifications:
· Frequency Range: 200 MHz to 2 GHz
· Polarization: Linear Nominal
· Impedance: 50 Ohm
· Power Handling (CW): 800 Watts
· Connector: N-type (female)
· Standards: MIL-STD-461
· Weight: 8 lbs. 3.6 kg
· Dimensions (L x W x H): 27.2
Com-Power AH-220 Double Ridge Broadband Horn Antenna Data Sheet
Com-Power AH-220 Double Ridge Broadband Horn Antenna Manual
AH-640 Standard Gain Horn Antenna
AH-640 is a broadband horn antenna that offers excellent performance over the frequency range of 26.5 to 40 GHz. Most EMI test standards require the use of horn antenna for testing above 1 GHz. This Horn antenna is an excellent choice for both EMC radiated immunity and emissions testing.
Specifications:
· Frequency Range: 26.5 GHz – 40 GHz
· Power: 5 Watts continuous
· VSWR (Typical): 2.0: 1
· Polarization: Linear
· Impedance: 50 N)
· Connector: SMA (f)
· Weight: 1.5 lbs./ 0.68 kg
· Size: 8.7 x 5.7 x 9 inches / 22 x 14.5 x 22.8 cm
· Mounting: 1/4 inch x 20 threads
Com-Power AH-640 Standard Gain Horn Antenna Data Sheet
Com-Power AH-640 Standard Gain Horn Antenna Manual
AH-8055 High Power Horn Broadband Antenna
High Power Horn Antenna Model AH-8055 broadband horn antenna for EMC testing over the frequency range 800 MHz to 5.5 GHz. It is primarily intended for radiated immunity testing. It has excellent Gain, VSWR and high power handling capability.
Specifications:
· Frequency Range: 800 MHz to 5.5 GHz
· Power: 450 Watts CW
· VSWR (Typical): 2.8:1 Max / 1.7:1
· Average Gain: 10.6 dBi Min, 23 dBi Max,19.7 dBi
· Average Polarization: Linear
· Impedance: 50 Ω
· Connector: N (f)
· Weight: 19.5 lbs. / 8.8 kg
· Size: 17 x17 x 27.5 inches, or 43.1 x 43.1 x 69.8 cm
· Mounting: 1/4 x12 threaded hole
Com-Power AH-8055 High Power Horn Broadband Antenna Data Sheet
Com-Power AH-8055 High Power Horn Broadband Antenna Manual
AH-826 18 GHz to 26.5 GHz Standard Gain Horn Antenna
Standard Gain Horn Antenna 18 GHZ – 26.5 GHZ Com-Power AH-826 is a broadband horn antenna that offers excellent performance over the frequency range of 18 to 26.5 GHz. Most EMI test standards require the use of horn antennas for testing above 1 GHz. Because the AH-826 is linearly polarized, and can be use for transmitting and receiving, it is an excellent choice for both EMC radiated immunity and emissions testing. For Indoor or Outdoor Use One of our most popular standard gain antennas for immunity testing, the AH-826 is tough enough to use on a daily basis in both indoor and outdoor laboratory environments. Corrosion-resistant, high-grade aluminum construction provides long-term protection from the elements. A standard three-year warranty provides extended protection for your investment. Weighing just 1.5 lbs., the AH-826 is easy to transport and set up in the field. Also available is an optional tripod on which the antenna can be mounted. Applications Use an AH-826 standard gain horn antenna for immunity testing or emissions testing. We deliver the unit calibrated as per ANSI C63.5, with full NIST traceability. ISO 17025 accredited calibrations are also available. Typical applications for the AH-826 include: EMI testing to FCC, CE, MIL-STD-461, RTCA DO-160 or other similar regulatory standards. Product immunity testing. When used as transmitting antenna, it can produce radiated RF fields of more than 1,450 V/m @ 1 meter, using only 200 watts input power. Determining the effective radiated power (ERP) and/or effective isotropic radiated power (EIRP) of an RF transmitter. Use the AH-826 as a substitution antenna for testing to ETSI and other standards. Site comparisons, surveying, field monitoring and other general-purpose applications.
Specifications:
· Frequency Range: 18 GHz – 26.5 GHz
· Power: 5 Watts CW
· VSWR: 2.0 : 1
· Polarization: Linear
· Impedance: 50 N)
· Connector type: SMA (f)
· Weight: 2 lbs/ 0.9 kg
· Size: 7.8 x 9.5 x 5.6 inches / 19.8 x 24.1 x 14.2
Com-Power AH-826 18 GHz to 26.5 GHz Standard Gain Horn Antenna Data Sheet
Com-Power AH-826-Standard Gain Horn Antenna Manual
AH-840 18-40 GHz Passive Horn Antenna
Com-Power AH-840 is a Double Ridge Guide broadband horn antenna that offers excellent performance over the frequency range of 18 to 40 GHz. Most EMI test standards require the use of horn antenna for testing above 1 GHz. This Horn antenna is an excellent choice for both EMC radiated immunity and emissions testing.
Specifications:
· Frequency Range: 18 GHz – 40 GHz
· Power: 5 Watts CW
· VSWR: 2.0 : 1
· Polarization: Linear
· Impedance: 50 N)
· Connector type: 2.9 mm (f)
· Weight: 1.5 lbs/ 0.68 kg
· Size: 8.7 x 2.7 x 7.5 inch / 22 x 6.8 x 19 cm
Com-Power AH-840 18-40 GHz Passive Horn Antenna Data Sheet
Com-Power AH-840 18-40 GHz Passive Horn Antenna Manual
AHA-118 Wide Band Active Horn Antenna 700 MHz to 18 GHz
The Com-Power AHA-118 is a double Ridge Guide broadband horn antenna. it has a frequency range of 700 MHz to 18 GHz. Most EMI test standards require the use of horn antenna for testing above 1 GHz. However, low amplitude signals are difficult measure without amplification. The built in preamplifier amplifies the received signals immediately at the antenna output increasing signal strength. This allows the low signals to be seen above the noise floor of the EMC receiver. This Horn antenna is an excellent choice for EMC radiated emissions testing above 700 MHz.
Specifications:
· Frequency Range: 700 MHz – 18 GHz
· VSWR: 2.2 : 1
· Preamplifier Gain: 40 dB ± 2.5
· Connector Type: N type (f)
· Impedance: 50 Ω
· Polarization: Linear
· Power: 6 VDC, 500 mA
· Weight: 7 lbs max.
· Size: 10.2″ X 9.5″ X 5.6″ (25.9 x 24.1 x 14.2 cm)
Com-Power AHA-118 Wide Band Active Horn Antenna 700 MHz to 18 GHz Data Sheet
Com-Power AHA-118 Wide Band Active Horn Antenna 700 MHz to 18 GHz Manual
AHA-840 18 GHz to 40 GHz Double Ridge Active Horn Antenna
The Active Horn Model AHA-840 is part of our extensive line of EMC test antennas. The AHA-840 smartly incorporates a with a precision waveguide to coaxial adapter (meticulously tuned as a set for optimum VSWR performance and impedance matching) and a broadband, high-gain, low noise preamplifier; integrated into a single, well-built, durable, custom designed assembly which facilitates the flexibility to be configured for almost any application.
Specifications:
· Standards: FCC, CISPR, EN, ETSI, FAA, Mil-Std, Automotive etc.
· Frequency Range: 18 GHz to 40 GHz
· Polarization: Linear
· VSWR – Antenna Port: 1.4:1 average
· P(out) @ 1 dB Compression: >10 dBm
· Noise Figure: < 6 dB
· Active Antenna Gain: > 55
· dBi Preamplifier Gain: 37 to 43 dB
· Dimensions: 10.2” x 8.5” x 5.9” (26 cm x 21.7 cm x 15 cm)
· Weight: 1.5 lbs (0.68 kg)
· Connector Types: 50Ω [2.92mm] “K type” female (for all RF connections)
Com-Power AHA-840 18 GHz to 40 GHz Double Ridge Active Horn Antenna Data Sheet
Com-Power AHA-840 18 GHz to 40 GHz Double Ridge Active Horn Antenna Manual
AL-100 300 MHz to 1 GHz Log Periodic Antenna
The Com-Power Model AL-100 Log Periodic Antenna is lightweight and rugged. This Log Periodic Antenna can be utilized for EMI radiated emissions or immunity testing to meet the various test standards. Our Log Periodic Antenna has a low VSWR and can be used inside an anechoic chamber or outdoors in an open area test site. This Log Periodic Antenna operates in the frequency range of 300 MHz to 1 GHz
Specifications:
· Frequency Range: 300 MHz to 1 GHz
· Polarization: Linear Nominal
· Impedance: 50 Ohm
· Power Handling: 50 Watts Continuous
· Connector: N-type (female)
· Standards: FCC, CISPR, EN, ETSI, FAA, Mil-Std, Automotive, etc.
· Dimensions (L x W x H): 39
Com-Power AL-100 300 MHz to 1 GHz Log Periodic Antenna Data Sheet
Com-Power AL-100 300 MHz to 1 GHz Log Periodic Antenna Manual
ALC-100 Compact Log Periodic Antenna 300 MHz to 1 GHz
The ALC-100 Compact Log Periodic Antenna is lightweight and compact for easy transport and storage. It has a frequency range of 300 MHz to 1 GHz. It is ideal for off site EMC testing or testing inside a small EMC chambers. It is part of the ANK series antenna kits.
Specifications:
· Frequency Range: 300 MHz to 1 GHz (usable from 200 MHz)
· Polarization: Linear Nominal
· Impedance: 50 Ohm
· Power Handling: 50 Watts Continuous
· Connector: N-type(female)
· Standards: FCC, CISPR, EN, ETSI, FAA, Mil-Std, Automotive, etc.
· Dimensions (L x W x H): 25.5
Com-Power ALC-100 Compact Log Periodic Antenna 300 MHz to 1 GHz Data Sheet
Com-Power ALC-100 Compact Log Periodic Antenna 300 MHz to 1 GHz Manual
ALFM-80120 FM High Power Log Periodic Antenna 88 MHz to 108 MHz
The ALFM-80120 is a linearly polarized Log Periodic Dipole Array (LPDA) Antenna, operating over the frequency range of 80 MHz to 120 MHz. The ALFM-80120 Power Log Periodic Antenna is part of our custom designed antennas specifically geared for use as a high power transmitting antenna to establish radiated RF fields for immunity tests, and is capable of handling power levels up to 2500 Watts (CW).
Specifications:
· Product Name: Power Log Periodic Antenna
· Frequency Range: 88 MHz to 108 MHz (Usable from 80 MHz to 120 MHz)
· Polarization: Linear Nominal
· Impedance: 50 Ohms
· Power Handling: 2500 Watts (continuous)
· Connector: 7-16 DIN (female)
· Antenna Factor: 6 to 8 [dB(m-1)]
· Isotropic Gain: 1.5 to 5 dBi (@ 1 mtr)
· VSWR:
· · <1.3 (80 to 88 MHz)
· · <1.25 (88 to 108 MHz)
· · <1.45 (108 MHz to 120 MHz)
· Dimensions (H x W x D): 7.5 x 81.9 x 82.7 Inches [19 x 208 x 210 cm]
· Weight: 13.5 lbs. [6.1 kg]
Com-Power ALFM-80120 FM High Power Log Periodic Antenna Data Sheet
Com-Power ALFM-80120 FM High Power Log Periodic Antenna Manual
ALP-100 High Power Log Periodic Antenna 200 MHz to 1 GHz
The Com-Power ALP-100 is lightweight, compact, rugged. It has low VSWR and high power handling capabilities. So it can be utilized as a receiving antenna for radiated emissions tests, or as a transmitting antenna for radiated immunity tests. It is suitable for use in any normal test environment, such as an absorber-lined chamber or outdoors on an open area test site. It operates over the frequency range of 200 MHz to 1 GHz.
Specifications:
· Frequency Range: 200 MHz to 1 GHz
· Power (CW): 500 Watts
· Average Gain: 6 dBi
· Average VSWR: 1.2: 1
· Polarization: Linear
· Impedance: 50 Ω
· Connector: N type (f)
· Width: 29 in / 75 cm
· Length: 29 in / 75 cm
· Weight: 5 lbs / 2.2 kg
Com-Power ALP-100 High Power Log Periodic Antenna Data Sheet
Com-Power ALP-100 High Power Log Periodic Antenna Manual
AL-RE101 Passive Loop Antenna for Mil-Std 30 Hz to 100 kHz
The AL-RE101 Passive Loop Antenna is specifically designed for tests according to MIL-STD-461, RE101, radiated emissions, magnetic field. During this test, radiated emissions from the Equipment Under Test (EUT) are measured from equipment and subsystem enclosures, including electrical cable interfaces, to verify that the magnetic field emissions from the EUT and its associated electrical interfaces do not exceed the specified requirements.
Specifications:
· Model: AL-RE101
· Frequency Range: 30 Hz to 100 kHz (usable range: 10 Hz to 1 MHz)
· Loop Diameter: 13.3 cm
· Number of Turns: 36 Turns
· Wire Type: 7 Strand, 41 AWG Litz
· Loop Shielding: Electrostatic Shield
· Resistance of Wiring: 10Ω (nominal)
· Inductance of Wiring: 340 µH (nominal)
· Maximum Input Current: N/A
· Connectors: BNC (female)
· Standards: MIL-STD-461, RE101, FCC Part 15 & 18 KDB
· Weight: 0.84 lbs. (0.38 kg)
Com-Power AL-RE101 Passive Loop Antenna Data Sheet
Com-Power AL-RE101 Passive Loop Antenna Manual
AL-RS101-SET Mil-Std Loop Antenna Set 30 Hz to 100 kHz
The RS101 Passive Loop Antenna Set is specifically designed for tests according to MIL-STD-461, RS101, radiated susceptibility, magnetic field. During this test, the Equipment Under Test (EUT) is exposed to magnetic fields of a specified magnitude to ensure that it does not exhibit any malfunction, degradation of performance, or deviation from specified indications.
Specifications:
Model | AL-RS101-TX | AL-RS101-RX |
Frequency Range | 30 Hz to 100 kHz | 30 Hz to 100 kHz |
Loop Diameter | 12 cm | 4 cm |
Number of Turns | 20 Turns | 51 Turns |
Wire Type | 12 AWG (enamel insulated) | 7 Strand, 41 AWG Litz |
Loop Shielding | N/A | Electrostatic Shield |
Resistance of Wiring | 40 mΩ | 4Ω |
Inductance of Wiring | 60 µH | 180 µH |
Maximum Input Current | 15 Amps (continuous) | N/A |
Connectors | (2) Banana Jacks | BNC (female) |
Specifications | MIL-STD-461, RS101 | MIL-STD-461, RS101 |
Weight | 2.2 lbs. [1 kg] | 0.26 lbs. [0.12 kg] |
Com-Power AL-RS101-SET Mil-Std Loop Antenna Set Data Sheet
Com-Power AL-RS101-SET Mil-Std Loop Antenna Set Manual
ALT-930-2M Van Veen Triple Large Loop Antenna System
The ALT-930-2M is a Triple large loop antenna system (LAS) based on the Van Veen/ Bergervoet principle. The operating frequency is from 9kHz to 30 MHz. The loops are 2m in diameter with the lowest point 0.5m above ground. The loop support structure is very easy to erect and with its wheel base very convenient to move. It is a complete 3-axis antenna system with three loops and three current transformers and a remote antenna switch (RAS-930). Each loop is connected to the remote antenna switch via its current transformer. The output of the switch can be connected to any EMI measurement device.
Specifications:
· Frequency range: 9 kHz to 30 MHz
· Antenna factor: +10 to -25 dBΩ typical (Matched to CISPR 16-1-4/CISPR 15)
· RF connector (Current transformer & Remote switch): N (female)
· Standards: Fully compliant with CISPR 16-1-4, CISPR 15, EN 55015
· Loops: Three independent loops, 2 meter diameter
· Dimensions (assembled): 2.6 x 2.1 x 2.1 meters (H x W x D)
· Loop Material: PEX
· Support Material: FRP
· Input impedance: 50 Ω
· Remote access switch power supply: 6 Vdc
Com-Power ALT-930-2M Van Veen Triple Large Loop Antenna System Data Sheet
Com-Power ALT-930-2M Van Veen Triple Large Loop Antenna System Manual