COM-POWER PRODUCTS
• Company Overview
• Absorbing Clamps
• Antenna Kits
• Antennas
• CDNs
• Comb Generators
• Current Probes
• EM Clamps
• Emissions System
• Immunity System
• ISNs
• LISN
• Magnetic Field Generator
• Masts
• Near Field Probes
• Power Amplifiers
• Preamplifiers
• Spectrum Analyzers
• Surge Generators
• System Controllers
• Telecom Analyzer
• Telecom Test System
• Transient Limiters
• Tripods
• Turntables
• Data Sheets
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
Com-Power Masts
Automated and Manually Operated Antenna Masts.
AM-400 Antenna Mast For EMC Testing
For CISPR and FCC Radiated Test to Change Antenna Height The AM-400 antenna mast is suitable for making EMC radiated emissions measurements in an open area test site or test chambers. It has the following features: 1-4 meter antenna height standard for CISPR/FCC Motorized Electric height adjust Low-stretch polyester rope suspension Safety brake on the carriage to prevent antenna damage if the rope breaks Two position remote switch to adjust the height Low maintenance The cross boom allows mounting most types of antennas using appropriate adapters Made of mostly fiberglass non conductive materials Four meter boom can be laid flat when not in use Casters for easy moving Strong, stable construction with wide fiberglass base The boom can be laid flat when not in use.
Specifications:
- · Min. Antenna Height: 1 meter
- · Max. Antenna Height: 4 meter
- · Load Capacity:15 lbs. (6.8 kg)
- · Motor: 1/20 HP AC Gear Motor
- · Power: Reversing Drum
- · Standard Extension Cable: 32.6 feet ( 10 meters)
- · Weight: 200 lbs. (90 kg)
Com-Power AM-400 Antenna Mast For EMC Testing Data Sheet
AM-400A Automated Antenna Mast
For CISPR and FCC Radiated Test to Change Antenna Height Com-Power modelAM-400A is a fully automated Antenna Mast which can be controlled through the Com-Power AMTTC-300 controller. The mast section is a rugged square fiberglass tube provides excellent stability. It also has capability of manual control via toggle switch on the mast.
-
Specifications:
· Scan Height Range: 0.5 to 4 meters
-
· Load Capacity: 22 lbs (10 kgs) max
-
· Total Height: 4.6 meters
-
· Controller Interface: Fiber Optic via Duplex VL (Avago duplex latching POF versatile link jack)
-
· Fiber Optic Cable: 10 Meter VL/VL duplex crossover POF (up to 30 mtr optional available)
-
· Height Resolution: 1 cm ( 0.01 meter)
-
· Manual control: Toggle switch on motor box
-
· Input Power: 100
Com-Power AM-400A Automated Antenna Mast Data Sheet
AMTTC-300 Antenna Mast and Turntable Controller
Antenna Mast and Turntable Controller Com-Power model AMTTC-300 Antenna Mast / Turntable Controller provides fully automated control of Com-Power Antenna Mast & Turn Table. This Controller enables you to manually control the postion of the Turntable or Antenna Mast form the test area or allows you to program it from a PC (personal computer) via USB interface. A complete set of commands is provided along with the manual.
Specifications:
- · Channels: Up to three independent channels
- · Channel Interface: Fiber Optic via Duplex VL (Avago duplex latching POF versatile link jack)
- · Fiber Optic Cable: 10 Meter VL/VL duplex crossover POF (up to 30 mtr optional available)
- · PC Interface: USB 2.0
- · Operation Control: Front Panel or PC software
- · Display: 16 x 2 Alphanumeric LCD
- · Software Limit: Always displayed on front panel Can be turned on and off using front panel or PC software
- · System Input Power: 100 – 250 Vac, 50 Hz / 60Hz (100 VA Max.)
- · Fuse Type: 1 Amps (T)
- · Weight: 13 lbs (5.9 Kgs)
- · Dimensions: ( H x W x D) 7.75” x 19” x 13.5” (19.7 x 48.3 x 34.3 cm) (excluding handles)
- · Operating Temperature: 40°F to 104°F (5°C to 40°C)
Com-Power AMTTC-300 Antenna Mast and Turntable Controller Data Sheet
Com-Power AMTTC-300 Antenna Mast and Turntable Controller Manual