SCHWARZBECK PRODUCTS
• Accessories
• Antennas
• Antenna Adapter, Masts, Telescopes and Wheels
• Attenuators And Pulse Limiters
• Baluns
• Blocking Filters
• CDN´s
• CDNE
• Clamps: Abosorbing, Injection And Capacite Coupling Clamps
• Coaxial Cables
• Comb Generators / Reference Radiators
• Dummy Lamps
• Electromagnet
• Field Meters
• Helmhotz Coils / Radiating Loops
• LISN Line Impedance Stabilization Networks / AMN Artificial Mains Network
• BAN Broadband Artificial Networks Acc. To ISO 11452/7 Or DC-10614
• MagTest System
• Near Field Probes
• PLC – Devices Acc. To En 50561-1
• Preamplifiers
• Pulse Generators
• Striplines / TEM – Cells
• Spectrum Generator
• Used Equipment
• Van Der Hoofden Test Head
• Voltage Probes
SCHWARZBECK Company
SCHWARZBECK Data Sheets
SCHWARZBECK Product List
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
Baluns
• SY 9223-7637-4 – Symmetrical transformer balun
• SY 9223-120B – unsymm. Balun
• SY 9223-17-100 – Broadband transformer
• SY 9223-17-0.1 – Braodband transformer
• SY 9223-120 – Balun for IEC61643-21
• SY 9223-CISPR 13 – Broadband isolation transformer
• SY 9223 Profibus – PLC balun
The SY 9223 Profibus balun adapts a symmetrical signal to a coaxial line. Usually twisted pairs with an impedance of approx. 120 Ω are used to transmit the Profibus signals. The SY 9223 Profibus can be applied to use an existing triaxial wiring.
Frequency Range: | DC ->20 MHz |
Nominal Impedance: | 120 Ω -> 50 Ω |
Dielectric strength: | ≥100 V |
Max. current per conductor: | 500 mA |
Coaxial connector: | BNT-50-0-1 |
Symmetrical connector: | Screw terminal |
Housing material: | polycarbonate |
Housing dimensions: | 17.5 x 58 x 90 mm |
Fastening: | DIN support rail 35 mm |
Weight: | 53 g |
Schwarzbeck SY 9223 Profibus Baluns Data Sheet
SY 9223-7637-4 is a symmetrical transformer (balun, balance-to-unbalance transformer). It transforms an unsymmetrical RF signal into a symmetrical one while not transforming the impedance. It has low insertion loss, a wide range of bandwidth and can dissipate a big amount of power.
Frequency range: | 100 kHz … 30 MHz |
Useable frequency range: | 9 kHz … 50 MHz |
Impedanz: | 50 Ω nominal |
Continuouse power dissipation: | 100 W |
Impedance ratio: | 1:1 |
Return loss: | >20 dB @ 30 Mhz |
Operating voltage: | 750 Vrms @ 60 Hz |
Insertion loss: | <0.2 dB |
Amplitude unbalance: | <0.5 dB |
Common mode rejection: | >40 dB @ 1 MHz |
Connector symmetric: | 4 mm safety laboratory jack |
Connector unsymmetric: | N-jack, 50 Ω |
Length: | 140 mm |
Width: | 105 mm |
Height: | 50 mm |
Weight: | ca. 0.5 kg |
· Balun unsymmetry 50 Ohm to symmetry 100 Ohm
· Input impedance: 50 Ohm unsymmetrical
· Input connector: BNC
· Output impedance: 100 Ohm symmetrical
· Output connectors: RJ45 Pin 4+5 and 4 mm banana female
· Frequency range: 9 kHz – 60 MHz
· Balun unsymmetrical 50 Ohm to symmetry 120 Ohm
· Input impedance: 50 Ohm unsymmetrical
· Input connector: BNC
· Output impedance: 120 Ohm symmetrical
· Output connectors: RJ45 Pin 4+5 and 4 mm banana female
· Frequency range: 9 kHz – 60 MHz
· Balun unsymmetrical 50 Ohm to symmetrical 135 Ohm
· Input impedance: 50 Ohm unsymmetrical
· Input connector: BNC
· Output impedance: 135 Ohm symmetrical
· Output connectors: RJ45 Pin 4+5 and 4 mm banana female
· Frequency range: 9 kHz – 60 MHz
· Balun unsymmetrical 50 Ohm to symmetrical 150 Ohm
· Input impedance: 50 Ohm unsymmetrical
· Input connector: BNC
· Output impedance: 150 Ohm symmetrical
· Output connectors: RJ45 Pin 4+5 and 4 mm banana female
· Frequency range: 9 kHz – 60 MHz
· Balun unsymmetrical
· 50 Ohm to symmetrical
· 150 Ohm EN 55015 CISPR 15
· Broadband transformer 1:1,4 or 50 Ohm : 100 Ohm
respectively according to to CISPR 17 for filter measurements.
· 100 Ohm-side with banana jacks.
· 50 Ohm-side with BNC-jacks.
· Broadband transformer 22:1 or 50 Ohm : 0.1 Ohm
respectively according to to CISPR 17 for filter measurements.
· 50 Ohm-side with BNC-jacks, 0.1 Ohm-side with banana jacks.
· Balun for transmission measurements
· according to to IEC61643-21
· 50 Ohm N to 120 Ohm screw terminals
· Broad band isolation transformer
· according to CISPR 13 fig. A.2
· 50 Ohm 75 Ohm
· 1:1 PLC balun
according to to EN 50065-2-1 2003 + A1:2005 for Immunity against small band disturbance voltage
· 3 kHz – 30 MHz
· BNC and banana jacks
· Option 2 µF + 50 Ohm: 2 µF + 50 Ohm, in isolated housing, banana jacks