Laplace Instruments Rf Emissions OATS (Open Area Test Site) Solution

Equipment required:

A   RF200    Antenna + stand
B   SA1002  EMC analyzer
C   SA1020  pre-amplifier
D   RF700    30MHz HP filter
E   ERS        Emission Reference source
F   EMCEngineer Software for your PC

Note:
If you require a 3GHz system, you can add a RF230 Antenna and change the EMC analyzer to the SA3000

Practical notes:
The standards require use of a site free of reflections, a ground plane and height scanning of the antenna. Limited resources dictate that these requirements generally cannot be achieved.
The ERS avoids the gross measurement uncertainties that would result.
In addition, ambient noise will mask EUT emissions.
Laplace software includes a feature to cancel out the ambient noise so that EUT emissions can be identified and measured.