LAPLACE - Luminaire Test (EN55015)

LAPLACE INSTRUMENTS PRODUCT LINE

Products by EMC Categories
Emissions
• Antennas
• EMC Emission Analyzers
• LISN
• Near Field Probes
• Pre-selector
• Reference Sources
• RF Sensors/Probes
• Test Cells
• Test Chambers
• Voltage Probe (PLIP)
Harmonic and Flicker
• AC2000A Harmonics & Flicker Analyzer
• AC1000 Clean Power Source
Immunity
• CDN’s
• Dips and Interrupts
• EFT & Burst
• ESD
• Power Amplifiers
• Sensors/Probes
• Surge
• Synthesizers
• Test Cells
• Test Chambers
Mains Filters
Product Software
RF Meters and Sensors
Systems
• Conducted Emissions
• Conducted RF immunity IEC1000-4-6
• Harmonic and Flicker
• Luminaire Test (EN55015)
• Non-RF Immunity IEC61000-4-4 IEC61000-4-5 IEC61000-4-11
• RF Emissions (CDN)
• RF Emissions (Cell/Chamber)
• RF Emissions (OATS)
• RF Immunity (Cell/Chamber) IEC61000-4-3
• Standards
• Sale! Radiated Emission Test System – Reduced!

Company Overview
Data Sheets
Product Catalog

Request a Quote / Contact Us!

LAPLACE INSTRUMENTS LUMINAIRE TEST EN55015

ALECS – Automated Luminance Emissions Compliance System for Luminaire Test (EN55015)

This standard specifies three measurements….

Test type	Frequency range	Test method
Conducted Emissions	9KHz – 30MHz	LISN
Radiated Emissions	30MHz – 300MHz	CDN or OATS
Magnetic field	9KHz – 30MHz	Large loop antenna

These tests are relatively straightforward and can be conducted in a normal laboratory or production environment. No screened rooms or special test sites are required.

The most critical are tests (a) and (b). The small size of most luminaires generally makes test (c) less critical.

A system that covers tests (a) and (b) is the ALECS-2. This includes all the hardware and cables and software necessary to perform the tests. The software runs on your PC which is connected to the hardware via the USB port.

If required, test (c ) can be added as an option.
The reference then becomes ALECS-3 IEC61000-3-2

The AC2000A Harmonics & Flicker analyzer provides a complete solution. It is also a useful power analyzer in it’s own right.
The analyzer is very easy to use and provides a simple pass/fail result. This test can be performed on any convenient bench.
There are no special installation or environmental requirements.
If the Harmonics analyzer is ordered as a separate item, the order code is AC2000A. If it is required as part of the above ALECS systems, just add -H to the reference.

Order codes:

Order Code	EN55015 Test	Includes	With harmonics
ALECS-1	LISN Method	SA1002-A RF915 LISN16A1P	ALECS-1-H
ALECS-2	LISN Method	SA1002-A	ALECS-2-H
ALECS-2	CDN Method	RF915 LISN16A1P CDN	ALECS-2-H
ALECS-3	LISN Method	SA1002-A	ALECS-3-H
ALECS-3	CDN Method	RF915	ALECS-3-H
ALECS-3	LLA (Large Loop Antenna) Method	LISN16A1P RF300	ALECS-3-H

All the above systems include:

• All software required to operate the system with….
- ·· Pre-loaded limits
- ·· Automatic setup of measurement parameters
- ·· Easily interpreted results, simple pass/fail judgment
- ·· Hard copy output in industry-standard format
- ·· All results can be saved and recalled later
• Software compatible with all current versions of Windows.
•All necessary cables and connectors
ALECS customers also receive a free one day training course at Laplace Instruments