EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    LAPLACE INSTRUMENTS RF SENSORS & PROBES

    Laplace Instruments Sensors/Probes Products

    Laplace supplies a range of RF field measurement tools….

    • RF sensors for EMC applications

    • RF current clamps for EMC applications

     

    RF sensors

    A range of miniature isotropic sensors connected via fiber optic cable to avoid any interaction with the RF field. This ensures that measurements are of the highest integrity, unaffected by any conductive cables or associated meter body. These Sensors are available for the use with synthesizers as part of an immunity test system in an EMC test chamber.

     

    • • Ideal for use in EMC immunity test chambers
    • • Provides real time feedback for stress level control
    • • Includes fiber optic interface with RS232 and USB outputs
    • • Total and individual axis outputs (Vector summation or X, Y, Z)
    • • Miniature size
    • • 2 versions: battery powered and laser powered.
    • • Battery powered version includes battery charging station. 12 hour operating time before recharging necessary.
    • • Laser powered version for continuous operation. Battery charging not required. Laser is included with the fiber optic interface.
    • • Standard fiber optic cable length is 10m. Longer cables available to order.

     

    Models:

    Model

    Power

    Frequency (Lo)

    (MHz)

    Frequency (Hi)

    (MHz)

    Measurement range

    EP600

    Battery

    100KHz

    9 GHz

    0.14 – 140 V/m

    EP601

    Battery

    10 KHz

    9 GHz

    0.5 – 500 V/m

    RAD004

    Laser

    9 KHz

    4 GHz

    1 – 4000 V/m

    RAD010

    Laser

    9 KHz

    12 GHz

    1 – 750 V/m

     

    Bulk Current Injection clamp (BCI)

    Used with BCI and/or EMClamp injection methods for monitoring the injected RF current. IEC61000-4-6 requires that the injected current should not exceed that which would be injected into a 150 ohm impedance. The measuring clamp enables this measurement. Note that eh RFIC-4-6 synthesizer features the monitoring and the associated control function.

     

    RF9123: Clamp-on current probe (measuring)

    Frequency range: 10KHz – 500MHz
    Max current: DC – 60Hz 200A
    @400Hz 200A
    @ RF 40A
    Pulsed 60A
    Nom. Zt (ohms): 1 – 5
    Aperture: 32mm

     

    Bulk Current Injection clamp (BCI)

    these are for injection of RF stress in accordance with IEC61000-4-6.

     

    RF9217: Clamp-on current probe (injection)

    Frequency range: 10KHz – 100MHz
    Max power: 100W
    Winding current: 26A
    Insertion loss: 200KHz – 5MHz <10dB
    120KHz – 70MHz <15dB
    50KHz – 100MHz <20dB
    Aperture: 38mm

     

    RF9125: Calibration fixture

    For clamp on current probes:

    Connector: N type
    Aperture: 38mm