Schlöder Product List
Schlöder- ESD Simulators
• SESD 216 ESD Simulator 16,5 KV
• SESD 230 ESD Simulator 30 kV
• SESD 30000 EDS Simulator 30 kV
• SEDS 2910 ESD – Test System 30 KV
Schlöder- EMC Generators / Measurement System
• CDG 7000 Conducted Disturbances Test System
• CWG 1500 Surge / Hybrid Generators
• CWG 2500 Surge / Combination Wave Generators
• MGA 1033 Magnetic Field Generator And Analizer
• CAL 1250 Magnetic Field Calibrator
• PG 01-2000 Pulse Generator
• PGA 1240 Immunity DC – 300 kHz
• PGA 1240-5A & PGA 1240-16A Power DC Generators
• PGA – 1330 Immunity Generator
Schlöder- Burst Generators
• SFT 1400 Burst Generator 125 KHZ
• SFT 1420 Burst Generator 2 MHZ
• SFT 2400 EFT/Burst Generator 2 MHZ
• SFT 2420 EFT/Burst Generator 2 MHZ
• VIS 1700 Voltage Interruption Simulator
Schlöder- CDN – Coupling Decoupling Networks
Schlöder- Coupling Networks For Burst & Surge
-CN 1240-32 And CN 1240-125 Coupling Switchable Networks
-Mains Operation 3-Phase
• CWG 520
• CWG 523 / CWG 523-550
• CWG 524 CWG 524-550
• CWG 524-B / CWG 524-B-550
Interconnection Lines / Surge test only
• CWG 1525
• CWG 1526
• CWG 1528
Schlöder Current Monitoring Probes
• CDG CMP-45 Current Monitoring Probe
• CDG CMP-46 Current Monitoring Probe
• CDG A CMP-46 Calibration Set for the CDG CMP-46 Current Monitoring Probe
Schlöder- Accessories
-Burst Generator Accessories
• CWG 520 – 3-phase coupling network, 4 x 16 A – Burst and Surge
• CWG 523, CWG 523-550, CWG 524 CWG 524–550 – 3-phase Coupling Network, 4 x 32 / 60 A – Burst and Surge
• CWG 524-B – 3-phase Coupling Network, 4 x 60 A – Burst only
• EMV-SOFT – Remote control software for SFT, CWG, VIS
• SFT 415 – Capacitive Coupling Clamp (CCC)
• SFT 415-1 – Capacitive Coupling Clamp with protection cover
• SFT 415-CS – Calibration Set for verification the CCC
• SFT 430 HV Cable for Burst Generator
• SFT 450-Set – Attenuator Set
• SFT 470 – Probe set for Burst generator to create short time magnetic fields
ESD Simulator Accessories
• SESD 271 – Vertical Coupling Plate
• SESD 272 – Earth Cable
• SESD 30 S 120 – ESD Remote Control Software
• SESD 30 T 1000 – Support Arm with Balancer
• SESD 3020 – SESD 3027 – Test Tip´s for ESD
• SESD 3036 – Hook for Balancer
• SESD 8800-4 – ESD Target 4GHz
Surge / Hybrid Generator Accessories
• CWG 520, CWG 520 / 550 – 3-Phase Coupling network
• CWG 523, CWG 523-550, CWG 524, CWG 524-550- Coupling networks for Burst and Surge testing
• CWG 550 – External 18 µF capacitor in a housing
• CWG 553 – External 0,5 µF capacitor + 40 Ohm resistor in housing
• CWG 554 – External 9 µF + 10 Ohm resistor in housing
• CWG 1525 – CDN for 2 unshielded, balanced signal lines, 1 A, with gas discharger arrester
• CWG 1526-4, CWG 1526-10 – CDN for 2 unshielded, unbalanced data – and signal lines, 4 A or 10 A
• CWG 1528 – CDN for 4 unshielded, unbalanced data – and signal lines, 6 A, with RS 232 interface
• EMV-SOFT – Control software for SFT, CWG and VIS generators
Immunity, 10 kHz – 230 MHz Accessories
• CDN xxx -Coupling/Decoupling
• CDG A 31xx – Calibration adapters for CDN’s
• CDN-EMCL-20 & CDN EMCL-35 – EM Clamps
• CDN ABCL-20 – Decoupling Clamp
• CDN EMCL-NW_10 – Matching Network
• BCI-P1 – Clamp Bulk Current Injection (BCI) with Calibration Set
• CDG CMP-45 – Current Monitoring Probe With Calibration Set
• CDG CMP-46 – Current Monitoring Probe
• CDG A CMP-46 – Calibration Set
• CDG 6050 – 6dB Attenuator, 20W
• CDG 6050-100W – 6dB Attenuator, 100
Immunity, DC – 150 KHZ Accessories
• CN xxx - Coupling Networks
• CN 1240 xx - Coupling networks, switchable
Magnetic Field Generator Accessories
• CMGA_HCST - Helmholtz Coils
• MGA_LS/RL - Loop Sensor
• MGA_Bx - Test adapter, EN 55103
Voltage Interruption Simulator Accessories
• VIS 740 Step Transformer
• EMV-SOFT - Control software for SFT, CWG and VIS generators
Schlöder- Helmholtz Coils
Schlöder- Signal Generator SG 0282
Schlöder- Isolation – Transformers With Double Shield Winding
Schlöder Power Frequency Magnetic Field Immunity Tests
• Schlöder MGA_BC-500 Field Coil acc. to EN 55103-2
• Schlöder MGA 1030 Magnetic Field System Data Sheet
• Schlöder MGA 1030 Magnetic Field Generator and Analyzer Additional Equipment Data Sheet
Products By Standars
RELIANT EMC PRODUCT LINES
MANUFACTURERS
Request a Quote / Contact Us!
SCHLÖEDER Data Sheets
Schlöder SESD 216 ESD Simulator Data sheet
Schlöder SESD 230 ESD Simulator 30 kV Data sheet
Schlöder SESD 216 and SESD 230 Operation Manual
Schlöder SESD 2910 ESD – Test System 30 kV Data sheet
Schlöder SESD 30000 ESD Simulator Data sheet
EMC Generators / Measurement Systems
- • CDG 6000 Immunity, 150kHz-230MHz
• CDG 6000_10 Immunity, 10kHz-230MHz
Schlöder CAL 1250 Magnetic Field Calibrator Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
• Schloder SESD 231 Discharge Return Cable Data Sheet
Schlöder CDG 6000 Immunity, 10 kHz – 230 MHz Data Sheet
Schlöder CDG 6000-75 Immunity, 10 kHz – 230 MHz Data Sheet
Schlöder CDG 6050 6dB Attenuator 20W Data Sheet
Schlöder CWG 550 and CWG 553 Surge Coupling Inpedance Data Sheet
Schlöder Immunity DC 300 kHz Data Sheet
Schlöder PGA 1330 Immunity Generator Data Sheet
Schlöder SESD 30000 ESD Test System Data Sheet
Schlöder CDG 6000 and CDG 6000-75 Conducted Disturbance Test Generator Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder CWG 1500 Surge / Hybrid Generator Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder MGA 1030 Magnetic Field Generator and Analyzer Data Sheet
Schlöder MGA 1030 Magnetic Field Generator and Analyzer Additional Equipment Data Sheet
Schlöder MGA_BC-500 Field Coil according to EN 55103-2 Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder MGA 1033 Magnetic Field System DC 250kHz Data Sheet
Schlöder MGA 1033 Magnetic Field System DC 250kHz Operation Manual
Schlöder PG 01-2000 Pulse Generator Data Sheet
Schlöder PG 01-2000 Pulse Generator Operations Manual
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder PG 1240 Immunity DC – 300 kHz Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder CDNs – Coupling Decoupling Networks
• Schlöder CDN Coupling Decoupling Network Data Sheet
• Schlöder CDN 6050 100W Data Sheet
• Schlöder CDN ABCL 20 Decoupling Clamp for immunity IEC 6100 4 6 Data Sheet
• Schlöder CDN AF Type Data Sheet
• Schlöder CDN Calibration Set Data Sheet
• Schlöder CDN CAN BUS Data Sheet
• Schlöder CDN D100 Calibration Data Sheet
• Schlöder CDN D 100 Direct injection device Data Sheet
• Schlöder CDN Dimensions Data Sheet
• Schlöder CDN EMCL 20 EM Clamp Data Sheet
• Schlöder CDN M Type Data Sheet
• Schlöder CDN RJ45S CDN HDMI CDN FireWire Data Sheet
• Schlöder CDN RJ Type Data Sheet
• Schlöder CDN S Type Data Sheet
• Schlöder CDN T Type Data Sheet
• Schlöder CDN USB P_CDN USB 3 P_CDN USB C_CDN USB 3 C_Data Sheet
Burst Generators
Schlöder SFT 1400 Burst Generator 125 KHz Data Sheet
Schlöder SFT 1420 Burst Generator 2 MHz Data Sheet
Accessories
• SFT 415 Capacitive Coupling Clamp
• SFT 415 – CS: Calibration Set for CCC
• SFT 450-1 (50 Ohm) and SFT 450-2 (1000 Ohm) Attenuators
• SFT 470 Probe Set – Magnetic Field
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder VIS 1700 Voltage Interruption Simulator Data Sheet
Accessories
• VIS-1700_1 Voltage Interruption Simulator
• SESD 30 S 100 ESD-Soft 6 ESD Remote Control Software
Schlöder Coupling Networks
Schlöder CWG 520 Coupling Network Data Sheet
Schlöder CWG 523 (32A) CWG 524 (60A) Coupling network for Burst und Surge Data Sheet
Schlöder CWG 524-B Coupling Network Burst Data Sheet
Schlöder CWG 1525 Coupling network Surge Data Sheet
Schlöder CWG 1526- 4 and CWG 1526-10 Coupling network Surge Data Sheet
Schlöder CWG 1528 Coupling network Surge Data Sheet
Schlöder BCI-PI Bulk Current Injection Probe Data Sheet
Schlöder CDG 6000-75-DC_400 and CDG 6000-75_400 Conducted Disturbance Test Generator Data Sheet
VIS 740 | Step transformer 0%, 40%, 70%, 80% | more Info (PDF) |
|
EMV-SOFT | Remote control software for SFT, CWG, VIS | more Info |
Type |
Feature |
||
---|---|---|---|
|
CWG 520 |
3-phase coupling network 4 x 16 A – Burst and Surge |
more Info
|
|
CWG 523, CWG 524 |
3-phase coupling network 4 x 32 / 60 A – Burst and Surge |
more Info
|
|
CWG 1526-4, CWG 1526-10 |
CDN – 2 unshielded unsymmetrical interconnection lines |
more Info
|
|
CWG 1528 |
CDN – 4 unshielded unsymmetrical interconnection lines – RS 232 |
more Info
|
|
CWG 1525 |
CDN – 2 unshielded symmetrical interconnection lines, e.g. Field bus |
more Info
|
|
EMV-SOFT |
Remote control software for SFT, CWG, VIS |
more Info
|
|
CWG 550 |
18 µF – external coupling capacitor, acc. Ed. 3 of the IEC 61000-4-5 |
more Info |
Type | Feature | Description | |
---|---|---|---|
MGA_HCST | Helmholtz Coils | more Info (PDF) |
|
MGA_LS/RL | Loop Sensor | more Info (PDF) |
|
MGA_Bx | Test adapter, EN 55103 | more Info (PDF) |
Schlöder MGA_LS 040 Sample Calibration Data
Schloder-MGA_LS-040-Field-Flat_X-Y
Schloder-MGA_LS-040-Field-Flat_X-Z
Schloder-MGA_LS-040-Field-Flat_Y_Z
Schloder-MGA_LS-040-Field-Linearity-Plot-B-Feld_X_Y
Schloder-MGA_LS-040-Field-Linearity-Plot-B-Feld_X_Z
Schloder-MGA_LS-040-Field-Linearity-Plot-B-Feld_Y_Z
CN xxx | Coupling networks | more Info (PDF) |
|
CN 1240 xx | Coupling networks, switchable | more Info (PDF) |
CDN xxx | Coupling/Decoupling | more Info (PDF) |
|
CDG A 31xx | Calibration-Adapter | more Info (PDF) |
|
CDN-EMCL | EM Clamp | more Info (PDF) |
SESD 271 | VCP – Vertical Coupling Plate | more Info | |
SESD 272 | Earth cable | more Info | |
SESD 8800-4 | ESD Target 4 GHz | more Info (PDF) |
|
SESD 3025 / SESD 3026 | Test Tip: 30 mm AIR and CON with spring contact | more Info | |
SESD 3036 | Hook for balancer | more Info | |
SESD 30 S 100 | ESD remote control software | more Info (PDF) |
SFT 415 | Capacity coupling clamp | more Info (PDF) |
|
SFT 415-1 | Capacity coupling clamp – with protection cover | more Info (PDF) |
|
SFT 415-CS | Calibration Set for verification the capacity coupling clamp | more Info (PDF) |
|
SFT 450 – Set | Attenuators; 50 Ohm / 54 dB and 1000 Ohm / 60 dB – for verification the Burst generator and the capacity coupling clamp | more Info (PDF) |
|
SFT 470 | Probe Set, magnetic field | more Info (PDF) |
|
CWG 520 | 3-phase coupling network, 4 x 16 A – Burst and Surge | more Info (PDF) |
|
CWG 523, CWG 524 | 3-phase coupling network, 4 x 32 / 60 A – Burst and Surge | more Info (PDF) |
|
CWG 524-B | 3-phase coupling network, 4 x 60 A – Burst only | more Info (PDF) |
|
EMV-SOFT | Remote control software for SFT, CWG, VIS | more Info (PDF) |
Schlöder EMC Standards and Test Equipment Overview
Schlöder SFT 2400 Burst / EFT Generator acc. to IEC 61000-4-4
Schlöder CWG 2500 Surge Generator according to IEC 61000-4-5, max
Schlöder SESD 230 ESD Generator acc. to IEC/EN 61000-4-2
Schlöder CDG 7000 Conducted RF generator, acc. IEC 61000-4-6, Ed.4.0100