EnglishPortugueseSpanish

Request a Quote / Contact Us!

    Manufacturer

    Part Number or Numbers

    KAPTEOS PRODUCTS

    KAPTEOS PRODUCTS PORTFOLIO

    Kapteos offers a wide range of products and accessories.

    The central part of the system is the eoSense Converter which leads the accessories. The system measures electric fields based on electro-optic probes (Pockels effect). This high-end converter provides the most advanced features even within very harsh environment like few MV/m, ultra bandwidth from 40 Hz to 100 GHz.

    This portfolio is regularly updated with either improvements or new functions.

     Kapteos Product Portfolio Data Sheet

     

    COMPREHENSIVE ELECTRIC FIELD MEASUREMENT SYSTEM

    Kapteos offers a wide range of products and accessories.

    The central part of the system is the eoSense Converter which leads the accessories. The system measures electric fields based on electro-optic probes (Pockels effect). This high-end converter provides the most advanced features even within very harsh environment like few MV/m, ultra bandwidth from 40 Hz to 100 GHz.

    This portfolio is regularly updated with either improvements or new functions.

     Kapteos Product Portfolio Data Sheet

     

    The picture below presents the up to date available products and accessories. The minimum required system to perform an electric field measurement is to have the eoProbe sensor connected to the optoelectronic converter called eoSense Converter.

    KAPTEOS_SAS_comprehensive-electric-field-measurement-system

     

    EOSENSE CONVERTER TO OPERATE THE FULL SYSTEM

    KAPTEOS_SAS_eoSense 1 eoProbe front view

    The eoSense opto-electronic converter is paired with the eoProbe sensors and dedicated Kapteos software. You can also use dedicated instructions sent from your own software via the Ethernet port.

    A single eoSense Converter can support up to 3 eoProbes.

    The eoSense converts in real-time (100% analog conversion) the optical signal transmitted by the eoProbe into an electrical signal that can be analyzed with an instrument like an oscilloscope, a spectrum analyzer or any other signal processing instrument.

    It includes an antenna factor (AF) real-time treatment for measuring absolute electric fields (modulus, phase).

    Each eoSense Converter is delivered with a Routine Test Report valid for 2 years.

     Kapteos eoSense Converter Data Sheet

    EOPROBE TO MEASURE THE ELECTRIC FIELD

    KAPTEOS_SAS_Electric-field-probe-Transverse-air-with-optical-connector

    The Kapteos eoProbe measures one component of the electric field vector based on the electro-optic technology. The eoProbe Ultra-Wide Band sensor allows accurate measurements in almost any location and environment (air, liquids, gases, vacuum).

    Each eoProbe is delivered with a Routine Test Report valid for 2 years. This probe must be used with the eoSense converter.

    6 patents covers the eoProbe: EP2035845, EP2035846, US7769250, US8264684, CA2655034, CA2655447.

      Kapteos eoProbe Electric Field Probe Data Sheet

     Application Note: Comparison of different E-field measurement systems

    EOPOD FOR EOPROBE SENSORS

    KAPTEOS_SAS_eoPod for eoProbe sensors
     

    This accessory allows via its articulated arm to maintain the probe on a specific location. It is fully dielectric, hence it can be used near E-field sources.
    2 versions are available:
    • One for air and vacuum probes
    • One for bio probes

     

     Kapteos eoPod – eoProbe Electric Field Probe articulated arm Data Sheet

     

    EOLINK FIBER OPTICAL EXTENSION

    KAPTEOS_SAS_eoLink_Fibre optic extension

    The fiber optic extension is inserted between the eoSense converter and an eoProbe sensor to increase the distance up to a maximum of 100 meters. A rugged version for outdoor usage is available in standard.

     

     Kapteos eoLink Fiber Optic Extension Data Sheet

    EOCAL FOR ELECTRIC FIELD PROBE CALIBRATION

    KAPTEOS_SAS_eoCal for electric field probe calibration
    kapteos eoCal with eoSense and eoProbe Calibration Setup
    For a very accurate measurement inside liquid medium or air, eoCal is an easy and fast calibration accessory of your electric field probes.
     
     Kapteos eoCal Electric Field Probe Calibration Data Sheet

     

    EOVAC VACUUM CHAMBER FEED THROUGH FOR EOPROBES

    KAPTEOS_SAS_eoCal for electric field probe calibration

    eoVac Standard Setup
    Kapteos removable vacuum feed-through eoVacTM allows you to use air line electric (E) field probes eoProbeTM in a vacuum chamber when low to medium vacuum down to 0.5 hPa (or mbar) is sufficient.

     

    eoVacTM presents the main following advantages:

    • no additional insertion loss,

    • easy to operate,

    • low cost in comparison with any other vacuum optical feed-through.

     Kapteos eoVac Vacuum Chamber Feed Through for eoProbes Data Sheet

     

    KAPTEOS ON-SITE TRAINING

    Kapteos offers On-Site Training for all it’s customers.

    Measuring E-field in harsh environment, requires understanding the signals and their interpretations.

    The training covers how to TREAT the SIGNAL and how to pick-up very small signals either from a scope or from a spectrum analyzer.