Schwarzbeck Family of V-LISN’s for CISPR 16-1-2

Socket V-LISN for CISPR 16-1-2

· NSLK 8117 – 2 path, 9kHz-30MHz V-LISN

· NSLK 8126 – 4 path, 9kHz-30MHz V-LISN

· NSLK 8127 – 2 path, 9kHz-30MHz V-LISN

· NSLK 8128 – 4 path, 9kHz-30MHz V-LISN

· NSLK 8163 – 4 path, 9kHz-30MHz V-LISN

Wing Terminals V-LISN for CISPR 16-1-2

· NNLK 8121 – 4 path, 9kHz-30MHz V-LISN

· NSLK 8122 – 2 path, 9kHz-30MHz V-LISN

· NNLK 8129 – 4 path, (9kHz) 150kHz-30MHz V-LISN

· NNLK 8129-2 HV – 2 path, (9kHz) 150kHz-30MHz V-LISN

· NNLK 8130 – 4 path, (9kHz) 150kHz-30MHz V-LISN

· NNLK 8140 – Single Path, (9kHz) 150kHz–30MHz V-LISN

· Calibration adapters for V-LISN (V-AMN)

 

NSLK 8117 CISPR 16-1-2 Socket, 2 path, 9kHz – 30MHz V-LISN 

· 2 path V-LISN, 9kHz – 30MHz

· 50 µH + 5 Ohm || 50 Ohm

· 2 x 16 A Schuko socket

· 4mm banana socket connector for Artificial Hand

· BNC Socket Connector to EMI Receiver

  Schwarzbeck NSLK 8117 CISPR 16-1-2 socket, 2 path, 9kHz-30MHz V-LISN Data Sheet

 

NNLK 8121 CISPR 16-1-2 Wing Terminals, 4 path, 9kHz-30MHz V-LISN 

 

 

· V-LISN

· 9 kHz – 30 MHz

· 50 µH + 5 Ohm || 50 Ohm

· 4 x 50 (100) A

· wing terminals

(For continuously 100 A add the options cont. high current and cooling fans!)

  Schwarzbeck-V-LISN-NSLK-8126-Circuit-Data-Sheet

  Schwarzbeck NNLK 8121 CISPR 16-1-2 Wing Terminals, 4 path, 9kHz-30MHz V-LISN Data Sheet

 Schwarzbeck NNLK 8121 CISPR 16-1-2 Wing Terminals, 4 path, 9kHz-30MHz V-LISN Operating Time as a Function of CURRENT Data Sheet

 Options:

Option RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  NSLK NNLK 81xx LISN with Option RC for EMI Measurement Receivers Data Sheet

 Opt. PLC:
Option: Power Line Communication, according to EN 50065-1, selectable ranges: 3 – 9 kHz, 9 – 95 kHz, 95 kHz – 30 MHz.

  Schwarzbeck ISN-50561-1 Impedance Stabilization Network for PLC Data Sheet

 Schwarzbeck ISN-50561-3 Impedance Stabilization Network for PLC Data Sheet

 Artificial Mains NSLK 8127 with option PLC Data Sheet

 Option Hochstrom

Option: cont. high current, additional terminals to bypass

the 250 µH pre-filter chokes, provides less voltage drop

and less heating.

  NNLK 8121 Option Hochstrom

 Option 400/700V

Option: 400/700 V Voltage to Neutral / Voltage between lines

 Option Cooling Fans

Option: Cooling Fans

 Option TC

The temperature monitor module which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control module indicates this optical and acoustical.

  LISN Option TC Data Sheet

 NNLK Temperature Monitor Module Data Sheet

 

NSLK 8122 CISPR 16-1-2 Wing Terminals, 2 path, 9kHz-30MHz V-LISN 

 

· Topology: V-LISN

· Frequency Range: 9 kHz – 30 MHz

· Pre-filter choke: 250 µH

· Impedance simulation: 50 Ω || (50 µH + 5 Ω)

· Max. Voltage: 1000 VDC 750 VAC 50/60 Hz

· Max. Current: 50 A

 Schwarzbeck NSLK 8122 CISPR 16-1-2 Wing Terminals, 2 path, 9kHz-30MHz V-LISN Data Sheet

 

NSLK 8126 CISPR 16-1-2 Socket 4 path, 9kHz-30MHz V-LISN 

· V-LISN

· 9 kHz – 30 MHz

· 50 µH + 5 Ohm || 50 Ohm

· 4 x 16/25 A

· 2 x 16 A Schuko and 4 x 16 A CEKON socket

· Artificial Hand

  Schwarzbeck NSLK 8126 CISPR 16-1-2 socket 4 path 9kHz-30MHz V-LISN Data Sheet

 Schwarzbeck NSLK 8126 CISPR 16-1-2 socket 4 path 9kHz-30MHz V-LISN Operating Manual

 Options:

Option RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  NSLK 8126 Option RC

 

NSLK 8127 CISPR 16-1-2 socket,2 path, 9kHz-30MHz V-LISN 

· V-LISN, 9 kHz – 30 MHz

· 50 µH + 5 Ohm || 50 Ohm

· 2 x 16 A Schuko socket

· Artificial Hand

  Schwarzbeck NSLK 8127 CISPR 16-1-2 socket,2 path, 9kHz-30MHz V-LISN Data Sheet

 Options:

Option RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  NSLK 8127 Option RC

 Option PLC:

Option: Power Line Communication, according to EN 50065-1, selectable ranges: 3 – 9 kHz, 9 – 95 kHz, 95 kHz – 30 MHz.

  NSLK 8127 Option PLC

 

NSLK 8128 CISPR 16-1-2 Socket, 4 path, 9kHz-30MHz V-LISN 

· V-LISN, 9 kHz – 30 MHz

· 50 µH + 5 Ohm || 50 Ohm

· 4 x 32/50 A

· 2 x 16 A Schuko and 4 x 32 A CEKON socket

· Artificial Hand

  Schwarzbeck SLK 8128 CISPR 16-1-2 Socket, 4 path, 9kHz-30MHz V-LISN Data Sheet

Options:

Option RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  NSLK 8128 Option RC Data Sheet

 

NNLK 8129 CISPR 16-1-2 Wing Terminals, 4 path, (9kHz) 150kHz-30MHz V-LISN 

 

· V-LISN

· (9) 150 kHz – 30 MHz

· 50 µH || 50 Ohm

· 4 x 200 (300) A

· wing terminals

· low voltage drop.

  Schwarzbeck NNLK 8129 CISPR 16-1-2 Wing Terminals, 4 path, (9kHz) 150kHz-30MHz V-LISN Data Sheet

 A Circuit Diagram RF Section Data Sheet

 Options:

Option RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke. 

  NSLK NNLK 81xx LISN with Option RC for EMI Measurement Receivers Data Sheet

 Option 400/700V:

400/700 V Voltage to Neutral / Voltage between lines

 Option Lüfter:

Cooling Fans

 Option TC

The temperature monitor module which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control module indicates this optical and acoustical.

  NNLK Temperature Monitor Module Data Sheet

 

NNLK 8129-2 HV – CISPR 16-1-2 Wing Terminals, 2 path, (9kHz) 150kHz-30MHz V-LISN 

Topology:	V-LISN
Frequency Range:	(9 kHz) 150 kHz – 30 MHz
Impedance simulation:	50 µH || 50 Ω
Max. Voltage:	1000 VAC 50/60 Hz 1000 VDC
Max. Current:	2 x 200 (300) A
Mains terminals:	Wing terminals 12 mm, removable
Terminals for EUT:	Wing terminals 12 mm, removable
Length:	520 mm
Width:	445 mm
Height:	385 mm
Weight:	~22 kg
Standard:	CISPR 16-1-2

 Schwarzbeck NNLK 8129-2 HV – CISPR 16-1-2 Wing Terminals, 2 path, (9kHz) 150kHz-30MHz V-LISN Data Sheet

 Option RC for LISN:

Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

 Option RC for NNLK 8129-2 HV LISN

 Option TC for LISN:

The temperature monitor module which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature gets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If a critical temperature is reached the temperature control module indicates this optically and acoustically.

 Option TC for NNLK 8129-2 HV LISN

 

NNLK 8130 CISPR 16-1-2 Wing Terminals, 4 path, (9kHz) 150kHz-30MHz V-LISN 

 

· V-LISN

· (9) 150 kHz – 30 MHz

· 50 µH || 50 Ohm

· 4 x 400 (500) A

· wing terminals

· low voltage drop

· cooling fans

  Schwarzbeck NNLK 8130 CISPR 16-1-2 Wing Terminals, 4 path, (9kHz) 150kHz-30MHz V-LISN Data Sheet

 A Circuit Diagram RF Section Data Sheet

 Options:

Option RC

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  NSLK NNLK 81xx LISN with Option RC for EMI Measurement Receivers Data Sheet

Option TC

The temperature monitor module which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control module indicates this optical and acoustical.

 NNLK Temperature Monitor Module Data Sheet

 

NNLK 8140 CISPR 16-1-2 Wing Terminals, Single Path, (9kHz) 150kHz–30MHz V-LISN 

 

· Single Path V-LISN

· (9) 150 kHz – 30 MHz

· 50 µH || 50 Ohm

· 1 x 800 A continuously (1000 A short time)

· wing terminals

· low voltage drop

· High power resistors

· cooling fans.

· Max. Voltage: 1000 V DC or 650 V AC 50/60 Hz.

  Schwarzbeck NNLK 8140 CISPR 16-1-2 Wing Terminals, Single Path, (9kHz) 150kHz–30MHz V-LISN Data Sheet

 

Option TC

The temperature monitor module which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control module indicates this optical and acoustical.

  NNLK Temperature Monitor Module Data Sheet

 

NSLK 8163 CISPR 16-1-2 Socket, 4 path, 9KHz–30MHz V-LISN 

Topology	V-LISN
Frequency Range:	9 kHz – 30 MHz
Pre-filter choke:	250 µH
Impedance simulation:	50 Ω || (50 µH + 5 Ω)
Max. continuous current CEE:	4 x 63 A
max. Voltage:	400 / 700 VAC 630 VDC
Supply cable:	CEE plug (IEC 60309)
Connector for EUT:	CEE socket (IEC 60309  3L+N+PE 63 A)
Connector for «artificial hand»:	4 mm laboratory socket with screw terminal 6 mm, not removable
Connector to EMI-receiver:	BNC socked, 50 Ω
Length:	650 mm
Width:	450 mm
Height:	480 mm
Weight:	40.8 kg
Standard:	CISPR 16-1-2

  Schwarzbeck NSLK 8163 CISPR 16-1-2 Socket, 4 path, 9KHz–30MHz V-LISN Data Sheet

  Schwarzbeck NSLK 8163 CISPR 16-1-2 Socket, 4 path, 9KHz–30MHz V-LISN CE Certificate

 Options:

Opt. RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

  LISN NSLK 8163 RC Option Data Sheet

 

Calibration adapters for V-LISN (V-AMN)
KA 8127	BNC female to Schuko male. Fits for all LISN types with Schuko socket. e.g. NSLK 8127, NSLK 8126, NSLK 8128, R&S ESH3-Z5, ENV216
KA 8127 female	BNC female to Schuko female. Fits for all LISN types with Schuko plug. e.g. NSLK 8127, R&S ESH3-Z5, ENV216
KA 8126	BNC female to CEE / CEKON 16 A male. Fits for all LISN with 16 A three-phase socket e.g. NSLK 8126. Diameter of Phase/Neutral rods: 5 mm. Diameter of Earth rod: 6,9 mm.
KA 8126 female	BNC female to CEE / CEKON 16 A female. Fits for all LISN with 16 A three-phase CEE /CEKON plug, e.g. NSLK 8126. Inner diameter of Phase/Neutral rods: 5 mm. Inner diameter of Earth rod: 6,9 mm.
KA 8128	BNC female to CEE / CEKON 32 A male. Fits for all LISN with 32 A CEE / CEKON three-phase socket e.g. NSLK 8128, R&S ENV432. Diameter of Phase/Neutral rods: 5,9 mm. Diameter of Earth rod: 8 mm.
KA 8128 female	BNC female to CEE / CEKON 32 A female. Fits for all LISN with 32 A three-phase CEE / CEKON plug, e.g. NSLK 8128, R&S ENV432. Inner diameter of Phase/Neutral rods: 5,9 mm. Inner Diameter of Earth rod: 8 mm
KA 8163	BNC female to CEE / CEKON 63 A male. Fits for all LISN with 63 A three-phase socket, e.g. NSLK 8163. Diameter of Phase/Neutral rods: 8 mm. Diameter of Earth rod: 10 mm
KA 8163 female	BNC female to CEE / CEKON 63 A female. Fits for all LISN with 63 A three-phase CEE / CEKON plug, e.g. NSLK 8163 Inner diameter of Phase/Neutral rods: 8 mm. Inner diameter of Earth rod: 10 mm
KA 8121	BNC female to 4 mm banana plug. Fits for NNLK 8121, NSLK 8122 and NDTV 8160.
KA 8129	BNC female to 4 mm banana plug. Fits for NNLK 8129.
KA 8130	BNC female to 4 mm banana plug. Fits for NNLK 8130, NNBL 8230, NNBL 8240 and NNLK 8140.
KA 8125	BNC female to wing terminals. Fits for NNBM 8124, NNBM 8125, NNBM 8126 A, NNBM 8125 BCI and NNBL 8225, NNHV 8123, NPLC 8500. Diameter of terminals: 8,5 mm, distance of terminals: 60 mm
KA 8126 D	BNC female to wing terminals. Fits for NNBM 8126 D, NNBL 8226-HV, NNBL 8226, NNBL 8226-2, NNBM 8125 BCI with Option 200 A, NNBM 8124-200, NNBM 8126 G, NNHV 8123-200. Diameter of terminals: 8,5 mm, distance of terminals: 90 mm
KA 8126 F	BNC female to wing terminals. Fits for NNBM 8126 E, NNBM 8126 F, NNBM 8126 F HYB up to S/N 148. Diameter of terminals: 12,4 mm, distance of terminals: 90 mm
KA 8126 F HYB	BNC female to wing terminals. Fits for NNBM 8124-400, NNBM 8124-800, NNBL 8229 HV, NNBM 8126 F HYB starting from S/N 149, NNHV 8123-400. Diameter of terminals: 16,4 mm, distance of terminals: 110 mm
MSS 9630	Braid current blocking cable to avoid coupling effects caused by braid currents. Standard configuration: N-male, N-female,  length ca. 0.2-0.3 m. Required for isolation measurements.
KA 8127 NEMA	BNC female to NEMA male.  Fits for all LISN types with NEMA socket.