Standard	Description	Data Sheet
IEC 61000-4-2	Electrostatic discharge immunity test	SESD 216
IEC 61000-4-2	Electrostatic discharge immunity test	SESD 230
IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-11 IEC 61000-4-8 IEC 61000-4-9	Surge/Burst immunity test, ± 5 kV	CE-TESTER 1
	Surge/Burst immunity test ± 5 kV + Power Fail …. + magnetic field immunity test	CE-TESTER 2 + PFS/VPS + HI 100
IEC 61000-4-4	Electrical fast transient immunity test 5kV	EFTG 4510
IEC 61000-4-5	Surge immunity test, ± 5 kV, 2.5 kA	CE-SURGE / CE TESTER
	± 7.0 kV, 3.5 kA	PG 7-250
	± 10 kV, 5.0 kA	PG 10-504
	± 12 kV, 6.0 kA	PG 12-804
	± 24 kV, 12 kA	PG 24-2500
IEC 61000-4-8	Power frequency magnetic field immunity test	PFS 2516
IEC 61000-4-8	Power frequency magnetic field immunity test	+ HI 100
IEC 61000-4-9	Pulse magnetic field immunity test	HI 100
IEC 61000-4-9	Pulse magnetic field immunity test	+ PG .
IEC 61000-4-10	Damped oscillatory magnetic field immunity test	IPG 2553
IEC 61000-4-11	Voltage dips, short interruptions and voltage variations immunity test	PFS 2516
		CE-TESTER
		+VPS
IEC 61000-4-12 ANSI C62.41 IEC 1008-1	Ring-wave immunity test 0.5µs/100kHz, ±6 kV optional: Ring-wave test of RCCB´s	IPG 612T
IEC 61000-4-18 ANSI C37.90	Damped oscillatory wave immunity test slow 100kHz/1MHz, ± 3 kV fast 3/10/30 MHz, ± 4 kV	IPG 2554
IEC 61730-1/2	HV-Impulse Generate for solar modules Impulse voltage 1.2/50, 10 KV, 250 J Module capacitance from 10 – 183 nF	PG 10-200
IEC 61730-1/2	HV-Impulse Generate for solar modules Impulse voltage 1.2/50, 12 KV, 360 J Module capacitance from 10 – 183 nF	PG 12-360
Accessories:
IEC 61000-4-4 IEC 61000-4-5	Capacitive Coupling Clamp Coupling-/Decoupling Network for Burst	EFTC 2012
		CDN 4416B
	Coupling-/Decoupling Networks for Surge/Burst
	power supply lines, up to 5kV, 3*400V / 16A	CDN 4416
	power supply lines, up to 5kV, 3*400V / 32A	CDN 4432
	power supply lines, up to 5kV, 3*400V / 63A	CDN 4463
	power supply lines, up to 7kV, 3*400V / 16A	CDN 6416
	power supply lines, up to 7kV, 3*400V / 32A	CDN 6432
	power supply lines, up to 7kV, 3*400V / 63A	CDN 6463
	power supply lines, up to 10 kV, 3*400V / 16A	CDN 10416
	power supply lines, up to 10 kV, 3*400V / 32A	CDN 10432
	power supply lines, up to 10 kV, 3*400V / 63A	CDN 10463
	power supply lines, up to 12 kV, 2*240V / 16A	CDN 12216
	signal lines, up to 2.5 kV, 4*240V / 10A	CDN 2410
	signal lines, up to 2.5 kV, 4*60V / 2A	CDN 2402
	signal lines, up to 2.0 kV, 8*60V / 2A	CDN 2802
IEC 61000-4-4	Burst Calibration Kit	BCK 400F
IEC 61000-4-5	Surge Calibration Kit	SCK 105
IEC 61730-1/2	Capacitor Calibration Kit	CCK

Car Standards

Standard	Description	Data Sheet
ISO 7637-2 ISO 16750-2	The following tests are implemented – Immunity to Surge, Pulse # 1, # 2, # 3 – Direct current supply voltage – Over Voltage, Jump Start – Slow decrease and increase of supply voltage – Discontinuities in supply voltage – Damp Load Test A, Test B Load switch: – Power Supply Switch: 66V / 50A – Power Supply Switch: 66V / 100A – Power Supply Switch: 74V / 200A Various power amplifier possible	CAR-TEST- SYSTEM 14
ISO 7637-2	Transient Emission Test – with load switch, electronic / mechanical – with load resistors	CAR-TE14
ISO 16750-2	Load dump simulation, Pulse #5 / Test A+B	PG 2804
ISO 7637-2	Superimposed sinus ac Voltage Generator, 0-30 Khz; 30A	CAR SS A1250
ISO 16750-2	Power supply variation Pulses 66V 50A 66V 100A 74V 200A	PS 66-55 PS 66-110 PS 74-220
ISO 7637-2	Capacitive coupling clamp	CDN 2012
ISO TR 10605 IEC61000-4-2	Electrostatic discharge immunity test	SESD 30 000

Telecom Standards

Standard	Description	Data Sheet
FCC Part 68 ITU-T, K44 CCITT Blue Book	Telecom surge immunity test:
	1.2/50µs ± 6 / 10 kV	IPG 620/1050
	10/700µs, ±5 kV	PG 5-200-1
	1.2/50µs, 10/700µs, ±5 kV	PG 5-200-2
	1.2/50µs, 10/700µs, ±6.3 kV optional: 0.5-1/700-1000µs	PG 6-364
	1.2/50µs, 10/700µs, ± 10 kV	PG 10-1000
	1.2/50µs, 10/700µs, ± 12 kV	PG 12-1440
	0.5/700µs,10/700µs, ±14 kV	PG 14-1960
	10/700µs, ± 20 kV	PG 20-4000
	Telecom surge immunity test:
FCC Part 68 Belcore GR-1089	2/10µs, ± 5 kV up to 4*100/500 A	PG 6-500
	Telecom surge immunity test:
FCC Part 68	10/160 µs, ± 3.6 kV, 480 A	PG 4-641
	Impulse life test / hold over test:
ITU-T K44 CCITT K12	10/700µs,10/1000µs,2*100A	PG 6-432
ITU-T K44 CCITT K12	impulse spark-over test: 100-5000 V/µs > dc spark-over test: 0 – 637 V, 100 V/s insulation resistance: 0.25 – 250 MOhm	IPG 506
ITU-T K44	Power induction test	PIG 1.5-2000

EMC Test Equipment

Industry

Data Sheet	Description:
SESD 216	ELECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 10 kV, air discharge up to 16.5 kV > as specified in IEC 61000-4-2
SESD 230	LECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 30 kV, air discharge up to 30 kV
ESD 30000	ELECTRO STATIC DISCHARGE GENERATOR simulates disturbances caused by electrostatic discharge contact discharge up to 30 kV, air discharge up to 30 kV as specified in IEC 61000-4-2 and ISO TR 10605
EFTG 4510	ELECTRICAL FAST TRANSIENT GENERATOR simulates transient disturbances of the mains power supply caused by contact bouncing, waveform 5/50 ns, 0.2 – 5 kV, 1KHz-1MHz burst frequency, specified in IEC 61000-4-4
CE-TESTER	Compact EMC test unit, designed for testing electromagnetic immunity against pulsed and conducted interference according to IEC 61000-4-XX Burst up to 5kV Surge up to 5kV Power freq. magnetic field 50Hz Pulsed magnetic field 8/20µs Voltage dips and variation
IPG 612T	RING-WAVE GENERATOR simulates high-voltage transients of the mains power supply caused by switching in the major power system waveform 0.5µs/100 kHz, 6 kV, specified in IEC 61000-4-12, EN 61000-4-12, IEC 1008-1
IPG 2554	OSCILLATORY WAVE GENERATOR simulates high-voltage transients of the mains power supply caused by switching in gas isolated substations of the major power system, specified in IEC 61000-4-12, EN 61000-4-18 slow damped oscillatory wave 100 kHz, 0 – 3 kV, rep. rate 40Hz slow damped oscillatory wave 1.0 MHz, 0 – 3 kV, rep. rate 400 Hz fast damped oscillatory wave 3/10/30 MHz, 0 – 4 kV, rep. rate 5 kHz
PFS 2516	POWER FAIL SIMULATOR including motor driven variac 0 – 250 V / 16 A simulates transient interruptions and variation of the power supply voltage specified in IEC 61000-4-11

EFTG 4510 Accessories

Data Sheet	Description
Accessories for EFTG 4510
EFTC 2012	Capacitive Coupling Clamp for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
BCK 400F	Burst Calibration Kit including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling Networks for EFTG 4510
CDN 4416B	Coupling-/Decoupling Network Coupling of BURST – pulses to power supply lines 3 * 400 V, 25 A

CE Tester Accessories

Data Sheet	Description
Accessories for CE-TESTER
VPS 250-16	Variable Power Source Motor driven variac, control by CE-TESTER This sub-unit is necessary for generation of voltage variation according to IEC 61000-4-11
HI 100	Helmholtz Coil Air coil for generation of magnetic fields according to IEC 1000-4-8 / -9
EFTC 2012	Capacitive Coupling Clamp for capacitive coupling of BURST pulses to screened cables according to IEC 61000-4-4
SCK 105	Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators
BCK 400F	Burst Calibration Kit including impulse voltage divider 100:1, input impedance 50 Ohm, used for calibration of burst generators
Coupling-/Decoupling for CE-TESTER
CDN 4416 CDN 4432 CDN 4463	pulses to power supply lines 3 * 400 V, 16 A, 32 A or 63 A, surge: max. test voltage 5 kV, 1.2/50µs burst: max. Test voltage 5 kV, 5/50ns
CDN 4416 CDN 4432 CDN 4463
CDN 2402	pulses to data lines, 4 * 48 V, 2 A, max. test voltage: 2 kV, 1.2/50µs
CDN 2410	pulses to data lines, 4 * 240 V, 10 A, max. test voltage: 2 kV, 1.2/50µs
CDN 2802	pulses to data lines, 8 * 48 V, 10 A, max. test voltage: 2 kV, 1.2/50µs

EMC Test Equipment

KFZ- Industry

Data Sheet	Description
CAR TEST SYSTEM 14	EMC Test System, designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. The following tests are implemented: – Immunity to Surge, Pulse # 1, # 2, # 3 – Direct current supply voltage – Over Voltage, Jump Start – Slow decrease and increase of supply voltage – Discontinuities in supply voltage – Damp Load Test A, Test B Load switch: 50/100/200A Various power amplifier possible according to DIN/ISO 7637-1/2 and ISO 16750-2
CAR TEST SYSTEM 14	Transient Emission Test – with load switch, electronic / mechanical – with load resistors according to ISO 7637-1/2
CAR SS A1250	Superimposed sinus ac Voltage Generator 0 – 30kHz; 30A according to ISO 7637-1/2
Load Dump Generator PG 2804	Compact EMC test unit, designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. Available impulse waveforms: 5 / Test A+B, according to ISO 16750-2

Car Tester Accessories

Data Sheet

Description

CDN 2012

Capacitive Coupling Clamp
interference of burst pulses to screened lines
according to IS= 7637-3

SESD 30000

ELECTRO STATIC DISCHARGE GENERATOR
Contact discharge and air discharge up to 30 kV
according to IEC 61000-4-2 and ISO/TR 10605

EMC Test Equipment

Combination Wave Generator (CWG)

Data Sheet	Description
CWG Series:	COMBINATION WAVE GENERATORS Pulse voltage 1.2/50µs, Pulse current 8/20µs specified in IEC 61000-4-5, EN 61000-4-5, IEEE587, VDE0847-4-5
IPG 105	COMBINATION WAVE GENERATOR, IPG 105 Pulse voltage 1.2/50µs, – 1.0 kV, Pulse current 8/20µs, – 500 A
PG 2.5-32	COMBINATION WAVE GENERATOR, PG2.5-32 Pulse voltage 1.2/50µs, – 2,5 kV, Pulse current 8/20µs, -1.25 kA
CE SURGE / CE TESTER	COMBINATION WAVE GENERATOR, CE-SURGE Pulse voltage 1.2/50µs, – 5 kV, Pulse current 8/20µs, – 2.5 kA
PG 7-250	COMBINATION WAVE GENERATOR, PG 6-204 Pulse voltage 1.2/50µs, – 6 kV, Pulse current 8/20µs, – 3.0 kA
PG 10-504	COMBINATION WAVE GENERATOR, PG 10-504 Pulse voltage 1.2/50µs, – 10 kV, Pulse current 8/20µs, – 5.0 kA
PG 12-804	COMBINATION WAVE GENERATOR, PG 12-804 Pulse voltage 1.2/50µs, – 12 kV, Pulse current 8/20µs, – 6.0 kA
PG 24-2500	COMBINATION WAVE GENERATOR, PG 24-2500 Pulse voltage 1.2/50µs, – 24 kV, Pulse current 8/20µs, – 12 kA

CE-SURGE Accessories

Data Sheet	Description
Accessories for CE-SURGE
HI 100	Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105	Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Network for CE-SURGE
CDN 4416 CDN 4432 CDN 4463	three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A max. test voltage: 5 kV, 1.2/50µs
CDN 4416 CDN 4432 CDN 4463
CDN 2402	for data lines, 4 * 48 V, 2 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2410	for data lines, 4 * 240 V, 10 A, max. test voltage: 2.5 kV, 1.2/50µs
CDN 2802	for data lines, 8 * 48 V, 10 A, max. test voltage: 5 kV, 1.2/50µs

PG 7-250 Accessories

Data Sheet	Description
Accessories for PG 7-250
HI 100	Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105	Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 7-250
CDN 6416	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns
CDN 6432	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns
CDN 6463	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns
CDN 2402	Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A
CDN 2410	Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A

PG 10-504 Accessories

Data Sheet	Description
Accessories for PG 10-504
HI 100	Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105	Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 10-504
CDN 10416	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns
CDN 10432	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns
CDN 10463	Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns
CDN 2402	Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A bzw. 4 * 240 V, 10 A
CDN 2410	Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A

PG 12-804 Accessories

Data Sheet	Description
Accessories for PG 12-804
HI 100	Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9
SCK 105	Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators
Coupling-/Decoupling Networks for PG 12-804
CDN 12216	Coupling-/Decoupling Network Coupling of BURST or SURGE – pulses to power supply lines 2 * 240 V, 16 A Surge: max. test voltage: 12 kV, 1.2/50µs coupling mode: «line to line», «line to ground» and «common mode» Burst: max. test voltage: 4.5 kV, 5/50ns according to IEC 61000-4-4 / -5, VDE 0847-4-4 / -5

CCITT Test Equipment, Series K

Designed for testing of gas discharge tubes for protection of telecommunication installations.

Data Sheet

Description

Measurement of DC and impulse spark-over voltage of gas discharge tubes:

IPG 506

Front-chopped-wave Generator
Measurement of spark-over voltage of gas discharge tubes, according to CCITT.K12 / ITU-T, K44 Impulse voltage 5 kV: dU/dt = 100 V/µs – 5000 V/µs
DC-voltage 637 V: dU/dt = 100 V/s

Surge current testing of over-voltage protectors:

PG 6-200

Surge current generator: 5.0 kA, 8/20 µs

PG 6-400

Surge current generator: 10.0 kA, 8/20 µs

EMC 2015

Pulse Generator System
Mainframe with various pulse forming plug-in`s.

Pulse currents:	8 / 20 µs,	20 kA,	1500 J
	10 / 50 µs,	5 kA,	1500 J
	10 / 350 µs,	600 A,	1500 J
	10 / 700 µs,	300 A,	1500 J
	10 / 1000 µs,	200 A,	1500 J

PG 6-2402

Surge current generator: 2 * 25 kA, 8/20 µs

PG 6-432

Impulse Life Test Generator
Designed for testing two-gap over-voltage protectors, specified in CCITT 12 TR 1, K12

Surge current :

10 / 700 µs,

2 * 100 A,

360 J

10 / 1000 µs,

2 * 100 A,

360 J

HVTG 50-10

High-Voltage Test Unit
Designed for cw-testing of over-voltage protectors, specified in CCITT, 12 TR 1, K17
Open circuit output voltage : 2 kV-rms
Short circuit output current: 10 A-rms
> Test interval: CW or 0-999 cycles

High-voltage Pulse Generators designed for
testing telecom equipment:

PG 2-750

Surge current generator:
according to FCC, Part 68, ANSI/TIA 968-A-2002

current wave :

10 / 160 µs,

1600 V,

4 * 100 A

10 / 560 µs,

800 V,

2 * 100 A

Option 2:

10 / 1000 µs,

1000 V,

2 * 100 A,

GR-1089-CORE

PG 6-500

Surge current generator:
2/10 µs wave, according to GR-1089-CORE

first level lightning surge:	± 2500 V,	500 A, 2/10 µs,	4 wires
second level lightning surge:	± 5000 V,	500 A, 2/10 µs,	4 wires
intra building lightning surge:	± 800 V,	100 A, 2/10 µs,	4 wires
intra building lightning surge:	± 1500 V,	100 A, 2/10 µs,	4 wires

IPG 620

High-voltage Pulse Generator
Lightning surge: 1.2/50µs, 6 kV, 20 J, CCITT K22; ITU-T- K44

IPG 1050

High-voltage Pulse Generator
Lightning surge: 1.2/50µs, 10 kV, 50J, CCITT K22; ITU-T- K44

PG 5-200-1

High-voltage Pulse Generator
Switching surge: 10/700 µs, 5 kV, 200 J, specified in
CCITT K17-K22; ITU-T- K44

PG 5-200-2

High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 5 kV, 10 J, specified in
CCITT K17-K22; ITU-T- K44
Switching surge: 10/700 µs, 5 kV, 200 J, specified in
CCITT K17-K22; ITU-T- K44

PG 6-364

High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 6 kV, 20 J, specified in
CCITT K17-K22; ITU-T- K44
Switching surge 10/700 µs, 6 kV, 360 J, specified in
CCITT K17-K22; ITU-T- K44
One additional wave form available: 100/700 µs, 0.5/700 µs oder 1/1000 µs.

PG 10-1000

High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 10 kV, 50 J, specified in
CCITT K17-K22; ITU-T- K44
Switching surge 10/700 µs, 10kV, 1000 J, specified in
CCITT K17-K22; ITU-T- K44

PG 12-1440

High-voltage Pulse Generator
Lightning surge: 1.2/50 µs, 12 kV, 72 J, specified in CCITT 12 TR 1, K17, K20
Switching surge 10/700 µs, 12kV, 1440 J, specified in CCITT 12 TR 1, K17, K20

PG 14-1960

High-voltage Pulse Generator
Switching surge 10/700 µs, 14 kV, 2000 J, specified in
CCITT K17-K22; ITU-T- K44

PG 20-4000

High-voltage Pulse Generator
Switching surge 10/700 µs, 20 kV, 4000 J, specified in
CCITT K17-K22; ITU-T- K44

PG 4-640

High-voltage Pulse Generator
Switching surge 10/700 µs, 4 kV, 640 J, specified in ITU-T Spec. K44

PIG 1500

Power Induction Generator
designed for testing telecommunication ports, specified in CCITT, 12 TR 1, K20
Open circuit output voltage : 20 – 1500 V-rms, test time: 0.1 – 2.5 sec
Coupling impedance: + 0,5µF, + 1.0µF, //100 Ohm

Accessories

KN 100-4

Coupling Network
4 decoupling resistors 100 Ohm, specified in CCITT 12 TR1, K17, K20

CDN 5-64

Coupling Network
64 outputs, max. test voltage 5 kV, 10/700µs
designed for coupling to ISDN-Ports, output selectable: one of 64

CDN 5-80

Coupling Network
80 outputs, max. test voltage 5 kV, 10/700µs
designed for coupling to ISDN-Ports, outputs selectable: 20 of 80

High voltage pulse generators

Data Sheet	Description
IPG 255	Surge test of electrical insulations according to IEC 255 0.8/1.0/1.5/2.5/4.0/5.0/6.0/8.0 kV, We = 0.5 J, Rs = 500 Ohm
IPG 1201	Surge test of electrical insulations Pulse voltage 1 – 12 kV, according to EN 60065 Measurement of isolation resistance, Riso > 2 MW
IPG 605 IPG 1012 IPG 1218	High-voltage Pulse Generator designed for dielectric testing, lightning surge: Pulse voltage 1.2/50 µs, 6 kV / 10 kV resp. 12 kV, 5 J / 12 J resp. 18 J
IPG 2025 IPG 2436	High-voltage Pulse Generator designed for dielectric testing, lightning surge: Pulse voltage 1.2/50 µs, 20 kV / 24 kV, 25 J / 36 J
IPG 620	High-voltage Pulse Generator Pulse voltage 1.2/50 µs, 6 kV, 20 J, CCITT 12 TR 1, K17
IPG 1050	High-voltage Pulse Generator Pulse voltage 1.2/50 µs, 10 kV, 50 J, CCITT 12 TR 1 K17
PG 4-641	High-voltage Pulse Generator Pulse voltage 10/160 µs, 3600 V Pulse power 10/160 µs, 480 A
High-voltage Pulse Generators designed for dielectric testing of X/Y-capacitors and power line filters
IPG 809	Dielectric testing of X/Y-capacitors Pulse voltage 1.7/46 µs 8 kV 9 J Capacitor range 6.8/10/15/22 nF
PG 6-401	Dielectric testing of X/Y-capacitors Pulse voltage 1.6/46 µs 6 kV 400 J Capacitor range 33/47/68/100/150/220/330/470 nF
High-voltage Pulse Generators designed for shock test of solar modules
PG 10-200	Pulse voltage 1.2/50 µs 10 KV 250 J to IEC/EN 60060-1, according to IEC/EN 61730-1/2
PG 12-360	Pulse voltage 1.2/50 µs 12 KV 360 J to IEC/EN 60060-1, according to IEC/EN 61730-1/2

PG 10-200/ PG 12-360 Accessories

Data Sheet

Description

CCK

Capacitor Calibration Kit

High current pulse generators

Data Sheet

Description

SPG1-25k

Impulse Current for watt hour meters

0.5 – 7.5 KA
25 – 375 A

Sinus Halbw.
T/2 = 10 ms

25000J

PG 6-250

Varistor-Tester

10 – 2500 A

8/20 µs

250 J

PG 6-200

Pulse current

5 kA

8/20 µs

200 J

PG 6-400

Pulse current

10 kA

8/20 µs

400 J

EMC 2015

Pulse Generator System
Mainframe with various pulse forming plug-in`s.

Pulse current:	25 kA	8 / 20 µs	1500 J
	5 kA	10 / 50 µs	1500 J
	600 A	10 / 350 µs	1500 J
	300 A	10 / 700 µs	1500 J
	200 A	10 / 1000 µs	1500 J
Pulse voltage:	10 kV	10 / 700 µs	1500 J
Combination wave:	2*10 kV	1.2 / 50 µs	1500 J
Combination wave:	2*10 kA	8 / 20 µs	1500 J

PG 6-2402

Pulse current generator

2 * 25 kA

8/20 µs

2400 J

PG 10-10000

Pulse current generator

2 * 50 kA

8/20 µs

10000 J

PG 12-3600

Pulse current generator

40 kA

8/20 µs

3600 J

PG 12-5000

Pulse current generator

50 kA

8/20 µs

5000 J

PG 15-5600

Pulse current generator

50 kA

8/20 µs

5600 J

PG 15-6600

Pulse current generator

70 kA

8/20 µs

6600 J

PG 16-4500

Pulse current generator

40 kA

8/20 µs

4500 J

PG 20-7000

Pulse current generator

50 kA

8/20 µs

7000 J

PG 20-14000

Pulse current generator

100 kA

8/20 µs

14000 J

PG 10-2500

Pulse current generator

500 A

10/700 µs

2500 J

PG 10-4000

Pulse current generator

500 A

10/1000 µs

4000 J

PG 10-6000

Pulse current generator

10 kA

10/50 µs

6000 J

PG 10-8000

Pulse current generator

1.0 kA

10/1000 µs

8000 J

PG 10-25000

Pulse current generator

10 kA

10/350 µs

25 kJ

PG 10-7000

Pulse current generator

2.5KA

10/350 µs

7000J

PG 15-27k

Pulse current generator

75 kA

20/75 µs

27 kJ

PG 5-35k

Pulse current generator

10 kA

10/2500 µs

35 kJ

PG 2.5-120k

Pulse current generator

20 kA

50/1000 µs

120 kJ

Accessories

PA 503
PA 505/525

SAFETY TEST CABINET
designed for high-voltage testing of components, PCB´s etc. prevents accidental contact with live parts of test object.
Test voltage: 10 kV, Safety interlock connector.
additional types: PA 503, PA 505/525

High-voltage Test and Measurement Equipment

AC and DC

Data Sheet	Description
AC-TESTER	Compact high-voltage test unit, designed for dielectric testing of electrical isolations and measurement of protective earth resistance and insulation resistance, according to IEC/VDE. High-voltage test, up to 5 kVac, 100 mA Measurement of protective earth resistance Measurement of insulation resistance Measurement of leakage current Measurement of supply current
AC-TESTER 6	High Voltage AC test set 10 kV ac, 100 mA
HVTS 30-20 HVTS 30-40	High Voltage AC test set 30 kV ac, 20 mA / 40 mA
HVTS 50-10	High Voltage AC test set 50 kV ac, 10 mA
HTS 20-5	High Voltage DC test set 20 kV dc, 5 mA
HTS 20-10	High-voltage DC test set 20 kV dc, 10 mA
Accessories
PA 503	Safety test cabinet additional types: PA 505

High voltage measurement equipment

Data Sheet

Description

TAS 4-40

Transient Data Acquisition System TAS 4-40
Potential-free measurement of fast rise pulses

HVM 2015

High-voltage measurement equipment
for AC, DC and Pulse voltages
Usable with all Hilo-Test high-voltage dividers
HVT XXX RCR

Calibration equipment

Data Sheet

Description

IPG 250

Calibration equipment, IPG 250
step response measurement

High voltage dividers

Data Sheet	Description
High-voltage dividers for AC, DC- or impulse voltage
HVT * RCR**	Broad band high voltage dividers HVT * RCR** for DC- AC- and impulse voltages
HVM 2015	High-voltage measurement equipment for AC, DC and Pulse voltages Usable with all Hilo-Test high-voltage dividers HVT XXX RCR
PVD	Pulse voltage divider For impulse voltage 1,2/50 us, until max. 12 KV Ratio 100:1, 1000:1

Shunts

Data Sheet	Description
ISM***	Current measuring resistors for high pulse currents
ISM***	Dimensions
WSM***	Current measuring resistors for high ac currents
WSM***	Dimensions

Safety Test Cabinet

Data Sheet	Description
PA 503	Safety test cabinet Test space ca. WHD: 400 / 140 / 250
PA 501/502	Safety test cabinet Test space ca. WHD: 440 / 180 / 300
PA 505/525	Safety test cabinet Test space ca. WHD: 400 / 250 / 400
PA 504	Safety test cabinet Test space ca. WHD: 490 / 300 / 300

Miscellaneous

Data Sheet	Description
High voltage power supplies, Capacitor charging units
HSN ***	High voltage switch mode power supplies
HCN ***	Capacitor charging units
HVG * S**	Precision high voltage power supplies with series regulator
Trigger Modules
TMS 2403, TMS 2404, TMS 2405, TMS 2406	Trigger module
MCT 5002, MCT 5004	Multi channel trigger unit
Trigger transformers
IT 5413	Trigger transformers for ignitions
TS 410, TS 510, IT 5425	Trigger transformer for spark gaps
Miscellaneous
STT 250	Anti interference isolating transformer
ITT 250-20	Isolating transformer
HS 10…HS 50	High voltage ground switch
USD 3801/3802	Ultrasonic detector for e.g. partial discharge
TEM 2000	TEM Test cell

Software

Data Sheet

Description

Hilo-Remote / Remote Control

For almost every HILO-Test device there is PC software available.
With a PC and this software the equipment can be operated over the LAN Ethernet or a USB/RS232 interface

PC Interface
USB

LAN Ethernet interface Adapter for optically isolated connection between the device and PC, with the necessary drivers

PC Interface
Ethernet

USB / RS232 Interface Adapter for optically isolated connection between the device and PC, with the necessary drivers

Lab-View drivers for devices on request

HILO-TEST PRODUCT LINE

RELIANT EMC PRODUCT LINES

MANUFACTURERS

Request a Quote / Contact Us!

HILO-TEST Data Sheets and downloads

Industry Standards

Car Standards

Telecom Standards

EMC Test Equipment

Industry

EFTG 4510 Accessories

CE Tester Accessories

EMC Test Equipment

KFZ- Industry

Car Tester Accessories

EMC Test Equipment

Combination Wave Generator (CWG)

CE-SURGE Accessories

Data Sheet

Description

Accessories for CE-SURGE

Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling-/Decoupling Network for CE-SURGE

three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A max. test voltage: 5 kV, 1.2/50µs

for data lines, 4 * 48 V, 2 A, max. test voltage: 2.5 kV, 1.2/50µs

for data lines, 4 * 240 V, 10 A, max. test voltage: 2.5 kV, 1.2/50µs

for data lines, 8 * 48 V, 10 A, max. test voltage: 5 kV, 1.2/50µs

PG 7-250 Accessories

Data Sheet

Description

Accessories for PG 7-250

Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling-/Decoupling Networks for PG 7-250

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63A, max. Surge test voltage 7 kV, 1.2/50µs max. Burst voltage 5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A

Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A

PG 10-504 Accessories

Data Sheet

Description

Accessories for PG 10-504

Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling-/Decoupling Networks for PG 10-504

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63 A max. Surge test voltage 10 kV, 1.2/50µs max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to data lines, 4 * 48 V, 2 A bzw. 4 * 240 V, 10 A

Coupling of BURST or SURGE – pulses to data lines, 4 * 240 V, 10 A

PG 12-804 Accessories

Data Sheet

Description

Accessories for PG 12-804

Helmholtz Coil Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling-/Decoupling Networks for PG 12-804

CCITT Test Equipment, Series K

Designed for testing of gas discharge tubes for protection of telecommunication installations.

Data Sheet

Description

Measurement of DC and impulse spark-over voltage of gas discharge tubes:

Front-chopped-wave Generator Measurement of spark-over voltage of gas discharge tubes, according to CCITT.K12 / ITU-T, K44 Impulse voltage 5 kV: dU/dt = 100 V/µs – 5000 V/µs DC-voltage 637 V: dU/dt = 100 V/s

Surge current testing of over-voltage protectors:

Surge current generator: 5.0 kA, 8/20 µs

Surge current generator: 10.0 kA, 8/20 µs

Pulse Generator System Mainframe with various pulse forming plug-in`s.

Pulse currents:

8 / 20 µs,

20 kA,

1500 J

10 / 50 µs,

5 kA,

1500 J

10 / 350 µs,

600 A,

1500 J

10 / 700 µs,

Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators

three-phase power supply lines 3 * 400 V, 16 A, 32 A or 63 A
max. test voltage: 5 kV, 1.2/50µs

Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63A,
max. Surge test voltage 7 kV, 1.2/50µs
max. Burst voltage 5 kV, 5/50ns

Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 16 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 32 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to power supply lines 3 * 400 V, 63 A
max. Surge test voltage 10 kV, 1.2/50µs
max. Burst voltage 4.5 kV, 5/50ns

Coupling of BURST or SURGE – pulses to data lines,
4 * 48 V, 2 A bzw. 4 * 240 V, 10 A

Helmholtz Coil
Air coil for generation of magnetic fields according to IEC 61000-4-8 / -9

Surge Calibration Kit
including impulse voltage divider and current viewing resistor, used for calibration of surge generators

Front-chopped-wave Generator
Measurement of spark-over voltage of gas discharge tubes, according to CCITT.K12 / ITU-T, K44 Impulse voltage 5 kV: dU/dt = 100 V/µs – 5000 V/µs
DC-voltage 637 V: dU/dt = 100 V/s

Pulse Generator System
Mainframe with various pulse forming plug-in`s.

Impulse Life Test Generator
Designed for testing two-gap over-voltage protectors, specified in CCITT 12 TR 1, K12

High-Voltage Test Unit
Designed for cw-testing of over-voltage protectors, specified in CCITT, 12 TR 1, K17
Open circuit output voltage : 2 kV-rms
Short circuit output current: 10 A-rms
> Test interval: CW or 0-999 cycles

High-voltage Pulse Generators designed for
testing telecom equipment:

Surge current generator:
according to FCC, Part 68, ANSI/TIA 968-A-2002